• Journal of the Korean Ceramic Society
• /
• v.33 no.6
• /
• pp.700-708
• /
• 1996

TiO2 membranes for microfiltration were prepared on $\alpha$-alumina support tube by slurry coating. The coating layer was obtained by flowing TiO2 slip on the inner surface of the alumina support. TiO2 membranes were heat-treated at 9$25^{\circ}C$ for 2 hrs. The thickness of the unsupported membrane was about 10${\mu}{\textrm}{m}$. The mean pore diameter of the membranes were 0.09 and 0.15${\mu}{\textrm}{m}$ respectively and the pure water flux was 900~1,200ι/m2.hr at room temperature and 1 bar. For a possible application of oily wastewater treatement an kerosene/wa-ter emulsion was separated in terms of flux and removal efficiency. In 60 min of operating time the flux of TiO2 membranes was 50~100 ι/m2.hr and removal efficiency was over 97% at 3kgf/cm2 of operating pres-sure and 600 ml/min of flow rate. TiO2 membranes could be recycled by reheat treatments at $600^{\circ}C$ for 2 hrs.

• Korean Chemical Engineering Research
• /
• v.55 no.1
• /
• pp.13-18
• /
• 2017

Sodium borohydride, $NaBH_4$, shows a number of advantages as hydrogen source for UAV PEMFC (Unmaned Aerial Vehicle Proton Exchange Membrane Fuel Cells). In order to use for UAV, the weight and volume of byproduct should be small after $NaBH_4$ hydrolysis reaction. Therefore, the weight and volume of byproduct were studied after $NaBH_4$ hydrolysis reaction using unsupported catalyst. The effect of catalyst type, concentration of $NaBH_4$, concentration of NaOH and thickness of catalyst pack on the weight and volume of byproduct were studied. Most of byproduct was $NaB(OH)_4$ and superficial volume of byproduct increased due to foam evolved from byproduct. The weight and volume of byproduct were not affected by concentration of NaOH used stabilizer. The weight of byproduct decreased as concentration of $NaBH_4$ solution increased, but maximum volume of byproduct obtained at 23 wt% of $NaBH_4$. Suitable defoaming agent reduced the volume of byproduct.

• Korean Chemical Engineering Research
• /
• v.56 no.5
• /
• pp.641-646
• /
• 2018

Sodium borohydride, $NaBH_4$, shows a number of advantages as hydrogen source for portable proton exchange membrane fuel cells (PEMFCs). Properties of $NaBH_4$ hydrolysis reaction using activated carbon supported Co-B/C, Co-P-B/C catalyst were studied. BET surface area of catalyst, yield of hydrogen, effect of $NaBH_4$ concentration and durability of catalyst were measured. The BET surface area of carbon supported catalyst was over $500m^2/g$ and this value was 2~3 times higher than that of unsupported catalyst. Hydrogen generation of activated carbon supported catalyst was more stable than that of unsupported catalyst. The activation energy of Co-P-B/C catalyst was 59.4 kJ/mol in 20 wt% $NaBH_4$ and 14% lower than that of Co-P-B/FeCrAlloy catalyst. Catalyst loss on activated carbon supported catalyst was reduced to about 1/3~1/2 compared with unsupported catalyst, therefore durability was improved by supporting catalyst on activated carbon.