• Transactions of Materials Processing
• /
• v.13 no.1
• /
• pp.21-26
• /
• 2004

Instrumented indentation tests have been used for estimating material properties. In order to analyze deformation characteristics with various factors, the unloading stiffness should be properly determined from the elastic behavior. The unloading stiffness is generally obtained from the shifted power functions fitting with the experimental unloading data. However, the functions often give rise to a poor representation of actual data, and also the unloading stiffness is governed by unloading condition. In this study, both numerical and experimental conditions to obtain proper unloading stiffness were investigated. The result showed that the amount of unloading ratio and hold time played an important role in fitting the unloading curves. The current efforts can successfully provide the unloading stiffness for indentation material properties.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.168-171
• /
• 2003

Instrumented indentation tests have been used for estimating material properties. In order to analyze deformation characteristics with various factors, the unloading stiffness should be properly determined from the elastic behaviour. In general, the unloading stiffness is obtained from shifted power functions fitting to indentation unloading curves. But, the functions give often a poor representation of actual data. In this study, control conditions for fitting unloading curves by shifted power functions were investigated. The current efforts may provide useful information about unloading process and valid unloading stiffness.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.76-79
• /
• 2000

Polymeric composites exhibit highly nonlinear and rate dependent behavior during loading and unloading in off-axis directions. The equilibrium state of stress during loading is lower than the state of stress produced at finite strain rates. The amount of stress relaxation during loading decreases. Interestingly, however, the stress goes up to reach to the equilibrium state of stress for a fixed displacement during unloading. The unloading behavior is quite similar to the loading behavior. The stress relaxation patterns during loading and unloading is also similar, and those depend on the fiber orientation angles and the loading and unloading rates. The AS4/PEEK thermoplastic composite is used to characterize the relaxation behavior for different off-axis angles and loading rates. There exists a transient loading region at the beginning of unloading. The effective stress and effective plastic strain concept is used to establish a master curve of stress recovery pattern for different off-axis angles and unloading rates.

• Journal of Navigation and Port Research
• /
• v.29 no.4
• /
• pp.305-312
• /
• 2005

Pick-up/delivery of consumer goods to offices, shops, and restaurants in order to support urban lives is one of the most vital activities in a city. With economic growth and technological innovation, a greater variety of goods have come to be supplied, and pick-up/delivery of consumer goods has become more complex. Efficient urban goods movement in Central Business District(CBD} starts with an efficient system for loading/unloading, and pick-up/delivery activities. Loading/unloading activity may be carried out on-street, or on especially designated space inside or outside buildings. Therefore, purpose of this study is to clarity the efficient urban goods movement in CBD(also called the pick-up/delivery activity) from the three different types of loading/unloading facilities. For this purpose, the differences in loading/unloading and truck-trip activity time of each loading/unloading facility was compared by performing the simulation analysis.

• Structural Engineering and Mechanics
• /
• v.11 no.5
• /
• pp.565-574
• /
• 2001

Experimental investigation into the behaviour of half-scale brick masonry panels were conducted under cyclic loading normal to the bed joint and parallel to the bed joint. For each cycle, full reloading was performed with the cycle peaks coinciding approximately with the envelope curve. Unloading, however, was carried out fully to zero stress level and partially to two different stress levels of 25 percent and 50 percent of peak stress. Stability point limit exhibits a unique stress-strain curve for full unloading but it could not be established for partial unloading. Common point limit was established for all unloading-reloading patterns considered, but its location depends on the stress level at which unloading is carried to. Common point curves were found to follow an exponential formula, while residual strains versus envelope strains can be expressed by a polynomial function of a single term. The relation between residual strain and envelope strain can be used to determine the stress level at which deterioration due to cyclic loading began.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1998.10a
• /
• pp.167-174
• /
• 1998

Recently several researches of high speed container ship and loading system are mainly accomplished in U.S.A. and Japan. Its shipping service is not realized but it is realized in near future. To effective use of the feature and efficiency of them, quay, loading/unloading. yard operation system, port management system and connection transport system must be well integrated and operated. Specially, loading /unloading speed of container crane is important for making effective use of them. To speed up loading/unloading system, RO-RO and LO-LO methods that are mostly exclusive system are studied on the container crane with special structure and mechanism to handle individual container or bundle of containers. In this paper these methods are shown. When new high speed loading system of container is desighed, the realistic constrains must be considered.

• Journal of Distribution Science
• /
• v.10 no.10
• /
• pp.25-33
• /
• 2012

Purpose - The Garak agricultural wholesale market ('Garak Market') plays a central role in the distribution of agricultural products in Korea and is important in connecting consumers with producers. However, problems regarding inefficiencies and the high-cost structure of the wholesale market's distribution/logistical system are being raised in relation to severe competition among retailers. Furthermore, the service needs of retailers and market users are not being fulfilled due to the inconsistency of the wholesale market's functions and facilities, thus reducing the competitiveness of the market. In this regard, innovative changes are being requested of the agricultural wholesale market according to changes in the agricultural product distribution environment. In particular, the lack of unloading facilities and the outdated unloading system of the wholesale market must be improved to enhance system efficiency. Research design, data, and methodology - This study observed the problems of the unloading system of the agricultural wholesale market in order to present relevant measures for improvement. The need for unloading auctions was also researched in this study. The survey of 70 forwarders belonging to the producing district distributor association of the Garak market was conducted by post. Additionally, 20 auction dealers and 59 shippers and transporters were individually interviewed. The survey on the need for unloading auctions used five-point Likert Scales. The statistical analysis was conducted with SPSS WIN 12.0 software. Results - First, the wholesale market must employ members of the unloading labor union to allow these employees to directly manage the unloading process. Second, it is crucial to revise regulations to ensure that the principal agent pays the unloading cost according to the standard unloading cost system. Third, the vehicle auction carried out for certain vegetable products must be converted to the unloaded auction system. According to the related interviews with the wholesale market's distribution agents, whereas shippers and transporters recognized the need for unloaded auctions, auction dealers tend to have a negative view of this system. Furthermore, the stated reasons in favor of unloaded cabbage, radish, and other vegetable auctions were prevention of constraint, creation of transparent trade conditions, and reduction of corrected seller tickets. Many of the respondents answered that the transport cost reduction rate in unloaded auctions must be below 20%. Fourth, the unloading system must be mechanized and a detailed, reasonable plan must be provided to settle the existing conflict with the unloading labor union. Conclusions - The proposals in this study are expected to play an important role in improving the cargo handling system of the wholesale agricultural product market in the future. Improving the system is expected to help shore up the competitiveness of the industry. If all the related bodies closely cooperate with each other and work harder, taking advantage of the synergies created by the facility modernization project, the Garak market will play a pivotal role in the distribution of agricultural products.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.2
• /
• pp.169-184
• /
• 2006

We analyzed the questionnaire survey for the current maintenance of Incheon port's loading and unloading equipments and the possibility of TPM(Total Productive Maintenance) application. Results of the survey indicated that the current maintenance of Incheon port's loading and unloading equipments was not good. So we suggest TPM as the future maintenance methodology of equipments. Using TPM to the loading and unloading equipments we will expect to improve the productivity of the loading and unloading operation and to increase the life time of equipment. And also it will raise the safety of Incheon port.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.10
• /
• pp.17-27
• /
• 2013

This paper explores stress release induced by unloading in dry sand. A series of model tests were carried out to measure stresses developed in testing sand during loading and those released during unloading for different boundary conditions. It was found that stress in the sand increased linearly with applied load. At the onset of unloading, almost no stress release was observed. Significant stress release took place when the shear stress in the sand induced by unloading exceeded the frictional resistance and caused movement of sand particles. The initiation and the magnitude of stress release depend on the stress condition prior to unloading, the decrease of external load, and also the frictional resistance in sand. A new conceptual stress-release model was next developed based on the model test results by considering the fundamental frictional behavior of granular materials.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.4
• /
• pp.8-14
• /
• 1994

The aim of this paper is the introduction and investigation of the characteristics and outline of self-unloading systems from the bulk handling point of view. Some years of experiences from the building of self-unloading bulk carriers are described hereunder.