• 제목/요약/키워드: unloaded quality factor

검색결과 16건 처리시간 0.022초

B $a^{+2}$의 결핍에 따른 Ba(Z $n_{1/3}$T $a_{2/3}$ $O_3$ 세라믹스의 고주파 유전특성에 관한 연구 (The effect of $Ba^{+2}$ shortage on microwave dielectric characteristics of $Ba_{1-x}$ $(Z $n_{1/3}$T $a_{2/3}$ $O_3$ ceramics)

  • 이문길;이두희;윤현상;김준한;홍재일;박창엽
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제7권5호
    • /
    • pp.403-408
    • /
    • 1994
  • Dielectric and structural properties of $Ba_{1-x}$(Z $n_{1}$3/T $a_{2}$3/) $O_{3}$+1 mol% Mn $O_{2}$ (x=0, 0.01, 0.02, 0.03, 0.04) ceramics was investigated at microwave frequencies. With $Ba_{+2}$ shortage, the sinterability and the unloaded Q( $Q_{u}$) were much improved, and the ordering in B site and the lattice distortion was greatly enhanced and the structure approached the completely ordered structure. $Q_{u}$ was strongly correlated with these factors such as ordering ratio, lattice distortion and sinterability, and had the maximum value of 7500 at x=0.01. The dielectric constant was near 30 and the temperature coefficient of the resonant frequency was 2 ppm/.deg. C at x=0.01.1.1.1.

  • PDF

S-parameter Circle-fit과 Lorentzian-fit 방법으로 측정된 고온초전도체 박막의 유효표면저항 비교 (A Comparative Study on the Effective Surface Resistance of High-$T_c$ Superconductor Films as Measured by Using the S-parameter Circle-fit and the Lorentzian-fit Methods)

  • 김민정;정호상;이재훈;이상영
    • Progress in Superconductivity
    • /
    • 제9권2호
    • /
    • pp.146-151
    • /
    • 2008
  • Measurements of surface resistance ($R_s$) of high temperature superconductor (HTS) films with accuracy are essential for microwave applications of HTS materials. In using the dielectric resonator method, uncertainties in the unloaded quality factor of the resonator cause significant errors in the measured $R_s$ of HTS films. We compare the Rs values of $YBa_2Cu_3O_{7-{\delta}}$ films calculated from the $Q_0$ as determined from the Lorentzian fit with that from the $Q_0$ as determined from the S-parameter circle-fit at temperatures between 15 K and 77 K. The two sets of values appeared to differ by 5%, 7%, 6%, and 11% at temperatures of 15, 60, 70, and 77 K, respectively, from each other, implying that careful error analysis needs to be performed in obtaining the $R_s$ of HTS films by using the Lorentzian-fit method, with the ones determined from the S-parameter circle-fit used as the reference.

  • PDF

초고주파 유전체공진기의 복소유전율 측정 (Microwave Measurement of Complex Permittivity of Dielectric Resonators)

  • 김정필;박위상
    • 대한전자공학회논문지
    • /
    • 제27권11호
    • /
    • pp.9-19
    • /
    • 1990
  • 원통형 및 환형 유전체공진기의 복소유전율과 투자율을 측정하기 위한 이론적인 해석과 측정방법을 제시하였다. 두 개의 평면도체 사이에 유전체공진기를 놓고 공진주파수와 무부하 Q, 그리고 치수를 측정하면 복소유전율과 투자율을 구할 수 있으며 이 방법을 고차모우드에 대하여 반복적으로 행하면 더 넓은 주파수 범위에서 측정이 가능하다. 이 때 각각의 공진모우드는 유전체공진기의 방위각과 축방향에 대한 전계 세기의 변화를 측정함으로써 결정할 수 있다. 그리고 여러가지 오차의 요인들을 고려한 측정오차의 해석으로부터 $TE_{0np}$ 또는 quasi-TE 모우드를 측정에 이용할 경우 복소유전율의 실수부분은 $0.5{\%}$, 허수부분은 $4{\%}$ 이내의 측정오차를 가짐이 밝혀졌다.

  • PDF

$\textrm{BaCo}_{x}\textrm{Ti}_{x}\textrm{Fe}_{12-2x}\textrm{O}_{19}$($1.0\leq\textrm{x}\leq5.0$)재료의 Microwave 유전특성 (Microwave Dielectric Properties of $\textrm{BaCo}_{x}\textrm{Ti}_{x}\textrm{Fe}_{12-2x}\textrm{O}_{19}$($1.0\leq\textrm{x}\leq5.0$) Materials)

  • 김찬욱;조남웅
    • 한국재료학회지
    • /
    • 제8권8호
    • /
    • pp.775-779
    • /
    • 1998
  • $\textrm{BaCo}_{x}\textrm{Ti}_{x}\textrm{Fe}_{12-2x}\textrm{O}_{19}$($1.0\leq\textrm{x}\leq5.0$)의 치환량 x에 따른 마이크로파 유전특성을 조사하기 위하여 5-10GHz 대역에서의 공명주파수 fo 및 무부하인자 Qu를 wave guide 방법으로 측정하였다. 측정결과, 치환양의 증가에 따라 유전율은 14.7(x=1)에서 23.4(x=5)까지 증가하였으며 계산결과 loss tangent는 모두 $\textrm{10}^{-3}$정도로 작았다. 이러한 제특성은 저비용으로 제조가능한 CoTi 치환형 Barium ferrite가 공진기 안테나 등 마이크로파 소자에 응용이 가능한 유망한 재료임을 보여주었다.

  • PDF

$V_2O_{5}$가 첨가되어 저온 소결된 (Pb,Ca)$ZrO_3$세라믹의 마이크로파 유전특성에 대한 연구 (A Study on the Microwave Dielectric Properties of Low-Temperature Sintered (Pb, Ca )$ZrO_3$ ceramics with $V_2O_{5}$ Additives)

  • 정영;박정흠;윤광희;윤현상;이두희;김규수;박창엽
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1994년도 춘계학술대회 논문집
    • /
    • pp.1-4
    • /
    • 1994
  • In this study. the microwave dielectric properties, such at dielectric constant(${\varepsilon}_{\gamma}$), unloaded quality factor multiplied with resonant frequency($Q_{u}$.f), and temperature coefficient of resonant frequency(${\tau}_{f}$), were investigated for the low-temperature sintered (Pb, Ca)$ZrO_3$ with $V_2O_{5}$ additives as well as structural properties. As a result, (Pb,Ca)ZrO$_3$ with 0.2 wt% $V_2O_{5}$ additive, sintered at $1200^{\circ}C$, showed good properties like ${\varepsilon}_{\gamma}$ 109, $Q_{u}$.f 2736 GHz, and ${\tau}_{f}$ -2.94 ppm/$^{\circ}C$. Especially ${\tau}_{f}$ was much better than ($Pb_{0.63}Ca_{0.37}$)$ZrO_3$ of which ${\tau}_{f}$ was known to be + 13.4 ppm/$^{\circ}C$, so it seems to be applicated in micorowave device components.

  • PDF

고자장 3T MRI 장비에서 동물영상을 위한 솔레노이드 RF코일 개발 (Development of Solenoid RF Coil for Animal Imaging in 3T High Magnetic Field MRI)

  • 이홍석;우동철;민광홍;김용권;이흥규;최보영
    • Investigative Magnetic Resonance Imaging
    • /
    • 제11권1호
    • /
    • pp.20-26
    • /
    • 2007
  • 목적 : 본 연구는 3 T MRI 장비에 적합한 동물영상용 솔레노이드 (solenoid) 코일을 개발하고 최적화한 후, 실제 동물모델에 대한 영상을 획득하는 것을 목표로 수행되었다. 대상 및 방법 : 솔레노이드 코일은 반경 4 cm, 길이 10 cm의 아크릴 구조물에 너비 2 cm, 두께 0.05 cm, 길이 10 cm의 구리테잎으로 3번 감긴 형태로 제작하였고, 구리테잎을 감을 때는 실린더 축과 수직이 되도록 감았으며 테잎간의 간격은 2 cm로 하였다. 축전지(capacitor)는 2-100 pF사이의 용량을 이용하였고, 코일은 수신 전용으로서 디자인되었다. 결과 : 개발된 솔레노이드 코일의 신호대 잡음비 (Signal to Noise Ratio; SNR)는 CuSO4수용액 팬텀(CuSO4; 0.7 g/L)에서 985, 쥐 (rat)를 이용한 동물실험에서 995이었고, Qfactor는 unload된 경우 203-206, load된 경우 84-89정도로 측정되었다. 솔레노이드 코일을 이용하여 획득한 영상은 상대적으로 해상도 (resolution)가 높았으며, 코일 시뮬레이션(simulation)을 통해서 얻은 RF field의 균질성 (homogeneity) 또한 매우 우수하였다. 결론 : 본 연구를 통하여 고자장 3T MRI 장비에서 쥐와 같은 작은 동물의 영상을 획득할 때 솔레노이드 코일을 사용하면 보다 향상된 영상의 대조도, 해상도, 선명도를 얻을 수 있는 가능성을 확인 할 수 있었다.

  • PDF