• Journal of the Korean Applied Science and Technology
• /
• v.30 no.1
• /
• pp.116-126
• /
• 2013

Glycol ethers are a group of solvents based on alkyl ethers of ethylene glycol commonly used in paints. These solvents typically have a higher boiling point, together with the favorable solvent properties of lower-molecular weight ethers and alcohols. The word "Glycol ethers" was registered as a United States trademark by Union Carbide Corp. Typically, glycol ethers are found in pharmaceuticals, sunscreens, cosmetics, inks, dyes and water based paints. On the other hand, glycol ethers are used in degreasers, cleaners, aerosol paints and adhesives. Most glycol ethers are relatively water soluble, biodegradable and only a few are considered toxic. Therefore, they are unlikely to pose an adverse risk to the environment. Recent study suggests that occupational exposure to glycol ethers is related to low motile sperm count in men, but the finding has been disputed by others. In this study, skin permeation of 3 types glycol ethers were studied in vitro using matrix such as solvent and detergent. The absorption of glycol ethers[methyl glycol ethers(MC), ethyl glycol ethers(EC) and butyl glycol ethers(BC)] has been measured in vitro through rat skin. Epidermal membranes were set up in Franz diffusion cells and their permeability to PBS measured to establish the integrity of the skin before the glycol ethers were applied to the epidermal surface. Absorption rates for each glycol ethers were determined and permeability assessment made to quantify any irreversible alterations in barrier function due to contact with the esters. Types of glycol ethers in vitro experimental results on MC> EC> BC quickly appeared in the following order: skin permeation was beneficial to the skin permeation small molecular weight, the difference in chemical structure, such as hydrophilic, because with the partition coefficient and solubility mechanisms and passive diffusion to increase the speed at which transmission is considered.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.4
• /
• pp.1-13
• /
• 2019

Recently, as the occurrence frequency of sudden floods due to climate change increased, it is necessary to install the facilities that can cope with the initial stormwater. Most researches have been conducted on the design of facilities applying the Low Impact Development (LID) and the reduction effect on rainfall runoff to examine with 1D or 2D numerical models. However, the studies on the examination about flow characteristics and stability of pipe network systems were relatively insufficient in the literature. In this study, the stability of the pipe network system in rainwater storage tank was examined by using 3D numerical model, FLOW-3D. The changes of velocity and dynamic pressure were examined according to the number of rainwater storage tank and compared with the design criteria to derive the optimal design plan for a rainwater storage tank. As a results of numerical simulation with the design values in the previous study, it was confirmed that the velocity became increased as the number of rainwater storage tank increased. And magnitude of the velocity in pipes was formed within the design criteria. However, the velocity in the additional rainwater storage pipe was about 3.44 m/s exceeding the allowable range of the design criteria, when three or more additional rainwater storage tanks were installed. In the case of turbulence intensity and bottom shear stress, the bottom shear stress was larger than the critical shear stress as the additional rainwater storage was increased. So, the deposition of sediment was unlikely to occur, but it should be considered that the floc was formed by the reduction of the turbulence intensity. In addition, the dynamic pressure was also satisfied with the design criteria when the results were compared with the allowable internal pressure of the pipes generally used in the design of rainwater storage tank. Based on these results, it was suitable to install up to two additional rainwater storage tanks because the drainage becomes well when increasing of the number of storage tank and the velocity in the pipe becomes faster to be vulnerable to damage the pipe. However, this study has a assumption about the specifications of the rainwater storage tanks and the inflow of stormwater and has a limitation such that deriving the suitable rainwater storage tank design by simply adding the storage tank. Therefore, the various storage tank types and stormwater inflow scenarios will be asked to derive more efficient design plans in the future.

• Radiation Oncology Journal
• /
• v.18 no.1
• /
• pp.51-58
• /
• 2000

Purpose :The effect of PTK inhibitors (herbimycin A and genistein) on the induction of radiation-induced apoptosis in Ph-positive KS62 leukemia cell line was investigated. Materials and Methods :K562 cells in exponential growth phase were irradiated with a linear accelerator at room temperature. For 6 MV X-ray irradiation and drug treatment, cultures were initiated at 2×106 cells/mL. The cells were irradiated with 10 Gy. Stock solutions of herbimycin A and genistein were prepared in dimethyl sulphoxide (DMSO). After incubation at 37$^{\circ}C$ for 0$\~$48 h, the extent of apoptosis was determined using agarose gel electrophoresis and TUNEL assay. The progression of cells through the cell cycle after irradiation and drug treatment was also determined with flow cytometry. Western blot analysis was used to monitor bel-2, bel-X$_{L}$ and bax protein levels. Results :Treatment with 10 Gy X-irradiation did not result in the induction of apoptosis. The HMA alone (500 nM) also failed to induce apoptosis. By contrast, incubation of K562 cells with HMA after irradiation resulted in a substantial induction of nuclear condensation and fragmentation by agarose gel electro-phoresis and TUNEL assay. Genistein failed to enhance the ability of X-irradiation to induce DNA fragmentation. Enhancement of apoptosis by HMA was not attributable to downregulation of the bel-2 or bel-X$_{L}$ anti-apoptotic proteins. When the cells were irradiated and maintained with HMA, the percentage of cells in G2/M phase decreased to 30$\~$40$\%$ at 48 h. On the other hand, cells exposed to 10 Gy X-irradiation alone or maintained with genistein did not show marked cell cycle redistribution. Conclusion : We have shown that nanomolar concentrations of the PTK inhibitor HMA synergize with X-irradiation in inducing the apoptosis in Ph (+) K562 leukemia cell line. While, genistein, a PTK inhibitor which is not selective for p210$^{bcr/abl}$ failed to enhance the radiation induced apoptosis in KS62 cells. It is unlikely that the ability of HMA to enhance apoptosis in K562 cells is attributable to bel-2 family. It is plausible that the relationship between cell cycle delays and cell death is essential for drug development based on molecular targeting designed to modify radiation-induced apoptosis.

• Asia pacific journal of information systems
• /
• v.21 no.4
• /
• pp.1-25
• /
• 2011

Internet-based commerce has undergone an explosive growth over the past decade as consumers today find it more economical as well as more convenient to shop online. Nevertheless, the shift in the common mode of shopping from offline to online commerce has caused consumers to have worries over such issues as private information leakage, online fraud, discrepancy in product quality and grade, unsuccessful delivery, and so forth, Numerous studies have been undertaken to examine the role of perceived risk as a chief barrier to online purchases and to understand the theoretical relationships among perceived risk, trust and purchase intentions, However, most studies focus on empirically investigating the effects of trust on perceived risk, with little attention devoted to the effects of perceived risk on trust, While the influence trust has on perceived risk is worth studying, the influence in the opposite direction is equally important, enabling insights into the potential of perceived risk as a prohibitor of trust, According to Pavlou (2003), the primary source of the perceived risk is either the technological uncertainty of the Internet environment or the behavioral uncertainty of the transaction partner. Due to such types of uncertainty, an increase in the worries over the perceived risk may negatively affect trust, For example, if a consumer who sends sensitive transaction data over Internet is concerned that his or her private information may leak out because of the lack of security, trust may decrease (Olivero and Lunt, 2004), By the same token, if the consumer feels that the online merchant has the potential to profit by behaving in an opportunistic manner taking advantage of the remote, impersonal nature of online commerce, then it is unlikely that the merchant will be trusted, That is, the more the probable danger is likely to occur, the less trust and the greater need to control the transaction (Olivero and Lunt, 2004), In summary, a review of the related studies indicates that while some researchers looked at the influence of overall perceived risk on trust level, not much attention has been given to the effects of different types of perceived risk, In this context the present research aims at addressing the need to study how trust is affected by different types of perceived risk, We classified perceived risk into six different types based on the literature, and empirically analyzed the impact of each type of perceived risk upon consumer trust in an online merchant and further its impact upon purchase intentions. To meet our research objectives, we developed a conceptual model depicting the nomological structure of the relationships among our research variables, and also formulated a total of seven hypotheses. The model and hypotheses were tested using an empirical analysis based on a questionnaire survey of 206 college students. The reliability was evaluated via Cronbach's alphas, the minimum of which was found to be 0.73, and therefore the questionnaire items are all deemed reliable. In addition, the results of confirmatory factor analysis (CFA) designed to check the validity of the measurement model indicate that the convergent, discriminate, and nomological validities of the model are all acceptable. The structural equation modeling analysis to test the hypotheses yielded the following results. Of the first six hypotheses (H1-1 through H1-6) designed to examine the relationships between each risk type and trust, three hypotheses including H1-1 (performance risk ${\rightarrow}$ trust), H1-2 (psychological risk ${\rightarrow}$ trust) and H1-5 (online payment risk ${\rightarrow}$ trust) were supported with path coefficients of -0.30, -0.27 and -0.16 respectively. Finally, H2 (trust ${\rightarrow}$ purchase intentions) was supported with relatively high path coefficients of 0.73. Results of the empirical study offer the following findings and implications. First. it was found that it was performance risk, psychological risk and online payment risk that have a statistically significant influence upon consumer trust in an online merchant. It implies that a consumer may find an online merchant untrustworthy if either the product quality or the product grade does not match his or her expectations. For that reason, online merchants including digital storefronts and e-marketplaces are suggested to pursue a strategy focusing on identifying the target customers and offering products that they feel best meet performance and psychological needs of those customers. Thus, they should do their best to make it widely known that their products are of as good quality and grade as those purchased from offline department stores. In addition, it may be inferred that today's online consumers remain concerned about the security of the online commerce environment due to the repeated occurrences of hacking or private information leakage. Online merchants should take steps to remove potential vulnerabilities and provide online notices to emphasize that their website is secure. Second, consumer's overall trust was found to have a statistically significant influence on purchase intentions. This finding, which is consistent with the results of numerous prior studies, suggests that increased sales will become a reality only with enhanced consumer trust.

• Journal of Food Hygiene and Safety
• /
• v.24 no.4
• /
• pp.352-356
• /
• 2009

The purpose of this study was to introduce the toxicological study review to evaluate the safety of PDMS on the 69th JECFA meeting. Polydimethylsiloxane is a polymer and its ADI was established at 23rd JECFA meeting in 1979. The ADI was maintained although the specification was expanded at its 26th, 29 th, 37 th meetings. Recently, it was reported that PDMS with low molecular weight and viscosity has high absorption rate and different toxicity, so it was submitted at 69th meeting. Toxicological studies of PDMS were submitted from the sponsor and additional information is collected from a document searching. The toxicological studies were reviewed in accordance with the 'Guidelines for the preparation of toxicological working papers for the Joint FAO/WHO Expert Committee on Food Additives'. In the available acute, sub-chronic and chronic toxicity studies on PDMS, dose-related increases in incidence and severity of ocular lesions(corneal crystal, inflammation of the corneal epithelium etc.) were consistently observed after oral dosing. It seems to be a local irritant effect, but the mechanism by which the ocular lesions arose is unclear, although the lack of absorption of PDMS indicates that it is unlikely to be a direct systemic effect. Consequently, the relevance of the ocular lesions for food use of PDMS could not be determined. The ADI of PDMS was re-established from 0-1.5 mg/kg bw/day to 0-0.8 mg/kg bw/day by applying additional safety factor 2 based on its ocular toxicity. The result of 0-0.8 mg/kg bw/day is a temporary ADI until further data are provided to 2010.

• Food Science of Animal Resources
• /
• v.29 no.2
• /
• pp.151-156
• /
• 2009

The prevalence of food allergies was investigated using questionnaires with 300 subjects whose ages ranged from 19 to 24 years old and the causative food allergens was analyzed using immunological analysis with serum of the subjects who answered that they have/had food allergy. The questionnaire showed that 11.33% of subjects have/had experience of food hypersensitivity, where the main causative foods were fish, beef, chicken, milk, egg, and pork in order. The meat allergy shared 4.65% (2.33% for beef, 1.66% for chicken, 0.66% for pork) in the prevalence of food allergies. The causative beef allergens were investigated with the serum of 6 subjects who have had beef allergy. Western blots were carried out with the serum of P6 subject who showed a positive reaction to beef extract in ELISA. The two specific bands were detected in beef extract on the PVDF membrane, and no band was detected in extracts of pork and chicken. A calculation of the distance of migration by SDS-PAGE enabled the molecular masses of the two bands to be estimated as 67kDa and 31kDa, respectively. The 67kDa was revealed as bovine serum albumin (BSA) which is one of the important beef allergens as reported previously though an analysis of the N-terminal amino acid sequence. However we could not identify the sequence of 31kDa, probably because they comprised several subunits and were modified proteins such as glycoprotein that were unlikely to be easily degraded by the Edman method. The 31kDa band were dyed with the PAS (periodic acid-schiff reagent), suggesting that it might be a glycoprotein. These results suggested that the 31kDa might be considered as a novel potential beef allergen which is not reported previously, although further studies are needed.

• Radiation Oncology Journal
• /
• v.13 no.4
• /
• pp.311-319
• /
• 1995

Purpose : To evaluate the survival and prognostic factors in patients with stage III non-small cell lung cancer treated with curative radiotherapy alone or combined with chemotherapy Materials and Methods : A retrospective analysis was undertaken of 35 patients who had locally advanced non-small-cell lung cancer and treated with curative radiotherapy in Department of Therapeutic Radiology, Kangdong Sacred Heart Hospital, from January 1991 through December 1993. According to AJCC staging, 15 patients were stage IIIA, and 20 were stage IIIB. Radiotherapy was delivered with 1 8-2 Gy per fraction/day. 5 days per week using 6 MV X-ray, to a total dose ranging from 48.8 Gy to 66.6 Gy (median, 61.2 Gy) in 4 to 9 weeks. Ten patients received neoadjuvant or concurrent chemotherapy with FIP (5-FU, ifosfamide, and cisplatin) or FP (5-FU and cisplatin) Results : For all Patients, median survival was 6 months. 1-year and 2-year survival rates were 23.3% and 6.7%, respectively The median survival was 8 months in stage IIIA and 5.5 months in stage IIIB. In patients treated with radiation therapy alone, median survival was 5 months and 1-year survival rate was 9%. In patients who received chemotherapy, median survival was 11 months and 1-year survival rate was 60%. The difference of survival between these two groups was statistically significant (p=0.03). Total radiation dose, degree of response, and Post-treatment ECOG score were also significantly associated with survival. But it was not affected by age, sex, pretreatment ECOG score, presence or absence of weight loss, tumor location. pathologic type, N stage, and degree of response to treatment. Conclusion : Conventional radiotherapy alone is unlikely to achieve long term survival in patients with stage III NSCLC. Radiotherapy with altered fractionation schedule or multimodality treatment combined with surgery and/or chemotherapy should be considered if feasible.

• Journal of Animal Science and Technology
• /
• v.53 no.4
• /
• pp.333-339
• /
• 2011

The present study was performed to investigate the effects of pre- and post-weaning feeding programs on growth of pigs. A total of 24 litters (avg. 10.6 piglets/litter) born from multiparous (Yorkshire ${\times}$ Landrace) dams ${\times}$ Duroc sires were provided with neither creep feed (CF) nor milk replacer ("CON"), 200 gm CF/litter/d from the 15th day of lactation ("MIN"), or CF and milk replacer ad libitum for 7 h during the daytime from the 7th day ("MAX") through weaning at d 21 of age. Sixty-eight weanling pigs selected randomly from each of CON and MIN were provided with phases 1, 2 and 3 nursery diets for 7, 14, and 13 days, respectively, in two pens; an equal number of piglets from MAX received the same diets for 6, 10, and 18 days, respectively. Subsequently, all pigs were fed grower 1 and 2 diets sequentially up to d 95 and 135, respectively. The entire pre- and post-weaning feeding trial was repeated three times under a split-plot design of experiment. Initial and final weights and ADG of the suckling pigs did not differ between MAX/MIN and CON. However, final wt of MAX adjusted for initial wt, which was 0.17-kg less in MAX than in CON, was greater than that of CON by 0.31kg, whereas the difference between MIN and CON in final wt barely changed after the adjustment. Growth of the animals during the nursery and growing phases was not affected by the feeding program, whereas d 55 and 135 BW, as well as d 6 BW, were highly correlated with weaning weight (r=0.81, 0.57, and 0.76; P<0.001, <0.05, and <0.001, respectively). In conclusion, results suggest that provision of creep feed and milk replacer from early lactation may be effective for increasing weight gain of light piglets, but that limited provision of creep feed during late lactation or extension of the duration of phases 1 and 2 vs. 3 nursery diets for several days is unlikely to influence the growth of pigs during the corresponding and subsequent periods.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.329-336
• /
• 2006

Iron manufacturing process involves production of various by-product including slag, sludge, sintering and EAF(Electric Arc furnace dust). Some of the by-products such as EAF and sintering dust are disposed of as waste due to their high heavy metal contents. It has been notice for many years that the EAF dust also contain about 65% of Fe(0) and Fe(II) and then the possible utilization of the iron. One possibility is to apply the EAF as a lining material in conjunction with clay or HDPE liners, in waste landfill. The probable reaction between the leachate containing toxic elements such as TCE, PCE dioxine and $Cr^{6+}$ is reduction of the toxic materials in corresponding to the oxidation of the reduced iron and therefore diminishing the toxicity of the leachate. It is, however, prerequisite to evaluate the leaching characteristics of the EAF dust before application. Amelioration of the leachate would be archived only when the level of toxic elements in the treated leachate is less than that of in the untreated leachate. Several leaching techniques were selected to cover different conditions and variable environments including time, pH and contact method. The testing methods include availability test, pH-stat test and continuous column test. Cr and Zn are potentially leachable elements among the trace metals. The pH of the EAF dust is highly alkaline, recording around 12 and Zn is unlikely to be leached under the condition. On the contrary Cr is more leachable under alkaline environment. However, the released Cr should be reduced to $Cr^{3+}$ and then removed as $Cr(OH)_3$. Removal of the Cr is observed in the column test and further study on the specific reaction of Cr and EAF dust is underway.

• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.127-136
• /
• 2015

To evaluate the effects of limestone powder and silica fume on the properties of high-strength high-volume ground granulated blast-furnace slag (GGBFS) blended cement concrete, this study investigated the rheology, strength development, hydration and pozzolanic reaction characteristics, porosity and pore size distribution of high-strength mortars with the water-to-binder ratio of 20, 50 to 80% GGBFS, up to 20% limestone powder, and up to 10% silica fume. According to test results, compared with the Portland cement mixture, the high-volume GGBFS mixture had much higher flow due to the low surface friction of GGBFS particles and higher strength in the early age due to the accelerated cement hydration by increase of free water; however, because of too low water-to-binder ratio and cement content, and lack of calcium hydroxide content, the pozzolanic reactio cannot be activated and the long-term strength development was limited. Limestone powder did not affect the flowability, and also accelerate the early cement hydration. However, because its effect on the acceleration of cement hydration is not greater than that of GGBFS, and it does not have hydraulic reactivity unlikely to GGBFS, compressive strength was reduced proportional to the replacement ratio of limestone powder. Also, silica fume and very fine GGBFS lowered flow and strength by absorbing more free water required for cement hydration. Capillary porosities of GGBFS blended mortars were smaller than that of OPC mortar, but the effect of limestone powder on porosity was not noticeable, and silica fume increased porosity due to low degree of hydration. Nevertheless, it is confirmed that the addition of GGBFS and silica fume increases fine pores.