• Journal of the Korean GEO-environmental Society
• /
• v.16 no.4
• /
• pp.33-40
• /
• 2015

In the correlation formulas related to consolidation proposed at present, the analyzed areas are limited to certain overseas or domestic areas and in order to increase the number of data, experimental data of different areas are integrated and therefore in many cases application is difficult. In addition, models have been developed without clear statistic evaluation of the obtained data. Accordingly, this study divided the soft areas of the west coast into Hangang, Kumgang and Yeongsangang in order to maximally reduce uncertainty of the experimental data and performed normality test and regression analysis on the physical and dynamic characteristics. According to the analysis result, the compression index and the modified compression index had strong linearity and in all areas modified compression index and initial void ratio had closest correlation, followed by total unit weight, water contents and liquid limits. As for overconsolidation ratio with depth, the width of overconsolidation ratio was large when the depth was less than 5 to 6 m in all areas and when the depth was over 5 to 6 m, the ratio was constant.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.3
• /
• pp.333-342
• /
• 2006

Statement of problem. Although many studies have been carried out to investigate the correlation between the degree of conversion and the flexural strength of composite resins, there is minimal information in the literature attempting to compare degree of conversion, flexural strength and their correlation between restorative composite resins and flowable composite resins. Purpose. The purposes of this study were to measure the degree of conversion and flexural strength of composite resins with different rheological behavior and to correlate the two properties. Materials and methods. Four restorative (Vit-1-escence, Z-250, Tetric ceram, Esthet-X) and four flowable (Aeliteflo, Admiraflow, Permaflo, Revolution) light-curing composite resins were investigated. The degree of conversion(DC) was analyzed with Fourier transfer infra-red spectroscopy(FTIR) spectrum by a potassium bromide(KBr) pellet transmission method. The spectrum of the unpolymerized specimen had been measured before the specimen was irradiated for 60s with a visible light curing unit. The Poiymerized specimen was scanned for its in spectrum. The flexural strength(FS) was measured with 3-point bending test according to ISO 4049 after storage in water at $37^{\circ}C$ for 24 hours. The data were statistically analyzed by an independent sample t-test and one-way ANOVA at the significance level of 0.05. The dependence of flexural strength on the degree of conversion was also analyzed by regression analysis. Results. Mean DC and FS values ranged from 43% to 61% and from 84.7MPa to 156.7MPa respectively. DC values of the flowable composite resins were significantly higher than those of restorative composite resins (P < 0.05). The FS values of restorative composite resins were greater than those of flowable composite resins. No statistically significant correlation was observed between the DC and the FS tested in any of the composites. The dependence of FS on DC in restorative or flowable composite resins was not significant. Conclusion. It can be concluded that radical polymerization of the organic matrix is not a major factor in determining flexural strength of the commercially available composite resins.

• Membrane and Water Treatment
• /
• v.15 no.2
• /
• pp.51-57
• /
• 2024

The removal of phosphorus, especially phosphate-form phosphorus, is necessary in wastewater treatment. Biofouling induced by the quorum sensing mechanism is also a major problem in membrane bioreactor (MBR), which reduces membrane flux. This study introduces lanthanum-doped quorum quenching (QQ) beads into MBR, confirming their inhibitory effect on biofouling due to Rhodococcus sp. BH4 and their capacity for phosphorus removal through lanthanum adsorption. A batch test was conducted to access the phosphate adsorption of lanthanum-QQ (La-QQ) beads and lab-scale MBR to verify the effect of inhibition. The study aimed to identify distinctions among the MBR, QQ MBR, and La-QQ MBR. In the batch test, the phosphate removal rate increased as the volume of beads increased, while the unit volume removal rate of phosphate decreased. In the lab-scale MBR, the phosphate removal rates were below 20% in the control MBR and QQ MBR, whereas the La-QQ MBR achieved a phosphate removal rate of 74%. There was not much difference between the ammonia and total organic carbon (TOC) removal rates. Regarding the change in transmembrane pressure(TMP), 3.7 days were taken for the control MBR to reach critical pressure. In contrast, the QQ-MBR took 9.8 days, and the La-QQ MBR took 6.1 days, which confirms the delay in biofouling. It is expected that La-QQ can be used within MBR to design a more stable MBR process that regulates biofouling and enhances phosphate removal.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.24 no.6
• /
• pp.1034-1041
• /
• 2010

The oriental medicine Jangwonhwan, which is a boiled extract of 12 medicinal herbs/mushroom, has been prescribed for patients with cognitive dysfunction and it is originally from the Korean medical text, DonguiBogam(amnesia chapter). Recently, a modified recipe of Jangwonhwan (LMK02-Jangwonhwan) consisting of seven medicinal plants/mushroom, was shown to reduce ${\beta}$-amyloid deposition in the brain of Tg-APPswe/PS1dE9 mouse model of Alzheimer disease. The toxicity of LMK02 was investigated in SD rats by oral repeated adminstration for 4 weeks and we tried to determine test does for 13 weeks repeated study. Quality control of tablet form of LMK02 was established by estimating indicative components, Ginsenoside Rg3 of Red Ginseng and Decursin of Angelicagigas Nakai. The toxicity of LMK02 was investigated in 6 weeks old specific pathogen free (SPF) Sprageu-Dawley rats by oral administration. Each test group were consist of 5 male and 5 female and they received doses of 500, 1,000 and 2,000 mg/kg/day of test substance for 4 weeks. The clinical signs, death rate, body weight, food consumption, ophthalmic examination, urinalysis, hematological and serum biochemistry, organ weight and pathological changes were examined and compared with those of control group. Urinalysis : We observed increase of PRO(p<0.01), SG(p<0.01) in female rats of 1,000 mg/kg/day and 2,000 mg/kg/day(p<0.01). Also, we observed increase of pH and KET in female rats of 1,000 mg/kg/day(p<0.05) and of 2,000 mg/kg/day(p<0.01). WBC in female rats in 1,000 mg/kg/day and 2,000 mg/kg/day were on increase. Hematological test : We observed increase of MCV in male rats of 250 mg/kg/day. (p<0.05) Serum biochemistry test : We found increase of CHO in female rats of 2,000 mg/kg/day(p<0.05). During the experimental period, there were no animals dead or moribund. There were no treatment related changes of general symptom, food and water consumption, organ weight and autopsy According to the results of 4-week repeated dose range finding study, the highest dose was established as 1000 mg/kg for 13-week repeated dose toxicity study and we determined to put 2 more groups by common ratio two.

• The Journal of Engineering Geology
• /
• v.4 no.3
• /
• pp.297-309
• /
• 1994

For a total of 210 city and Kun areas in Korea, a model was developed to predict the amount of groundwater use at each area. At first, the total areas were classified into 3 groups by the characteristics of groundwater use: residential(87), industrial(27) and agricultural (96) areas. Among them, type areas, represented by the dominant groundwater usage for typical purposes, were selected: residential(22), industrial(8) and agricultural(32) areas. Data for the various factors possibly related to the groundwater use were statistically analyzed. The factors include, 1) agricultural area, 2) industrial area, 3) adininistrative unit area(city or Kun), 4) population, 5) groundwater capadty for community water supply, 6) average water supply for a person per day, 7) agricultural water-use, 8) industrial water-use, 9) residential wateruse, 10) rates of community water supply. The data were correlated to the total amount of groundwater use, and the correlations tested at the 95% and 99% significance levels. Influential, significantly related, factors were identified from the tests. Using the multiple regression method with the influential factors, predictive equations were drawn to calculate the amount of groundwater use for residential-industrial and agricultural areas, respectively. The equations were calibrated to minimize the RMS(root mean square) of the differences between predicted and observed groundwater use. After the validation with future data, the model can be utilized in the regional development plans to predict the maximum groundwater demand at each area.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.5
• /
• pp.94-104
• /
• 2013

Experiments were divided into two parts; one part is to understand the basic properties of high flowable VA/VeoVa-modified cement mortar with different polymer cement ratio (P/C) and the weight ratio of fine aggregate to cement (C:F) and the other part is to investigate the effect of surface water spread on the concrete substrate on adhesion in tension. To understand the basic performance, the specimens were prepared with proportionally mixing VA/VeoVa redispersible powder, ordinary portland cement, silica sand, superplasticizer and viscosity enhancing agent. Here, P/C were 10, 20, 30, 50 and 75% and C:F were 1:1 and 1:3. As the change of P/C and C:F unit weight, flow test, crack resistance and adhesion in tension were measured. Three specimens with good adhesion properties were selected among specimens with different P/C and C:F. The effect of surface water evenly sprayed on concrete substrate on adhesive strength is investigated. The results show that surface water on concrete substrate increases the adhesion in tension of high flowable VA/VeoVa-modified cement mortar and additionally improves the flowability compared to the non-sprayed case.

• Journal of the Korea Concrete Institute
• /
• v.21 no.2
• /
• pp.147-152
• /
• 2009

The compressive strength test, bulk density and mortar absorption ratio were carried out to utilize the data as the basic sources for the lightweight mortar and the lightweight concrete, through the study on the physical characteristics of the artificial lightweight aggregate (ALA) made of waste glasses, which was developed for the first time in the country. On the basis of these experiments, the density and the unit volume weight of the ALA showed the value less than 50% of the common aggregate due to the independent pore structure, and the mortar that contains ALA had no big difference from the Control mortar in the test of the absorption ratio. It is judged that this happens based on the internal independent pore structure of the ALA. In case of the mortar containing ALA, there was a tendency of declination in the compressive strength and the bending strength as the mixing rate is increasing, but all mortar showed more than 70% of the Control mortar compressive strength except for the La50 mortar. Hereafter, it is judged that according to the control of the mixing ratio of mineral admixing agent, water and cement, it will realize the equal strength to the control mortar, and the long term edurance is needed to be considered together.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.1
• /
• pp.37-43
• /
• 2015

Korea has four distinct seasons, showing hot and humidity in summer and cold weather lasted in winter. Domestic research on earth work has been developed according to the seasonal characteristics, and most of research topics have focused on the effect of freezing-thawing on the performance of geo-materials. However, the previous research was performed on the ground compacted at room temperature and therefore, the effect of the sub-zero temperature at the time of construction was not fully investigated. The ground characteristics compacted at freezing temperature can be different from those at room temperature and show different characteristics of strength and deformation caused by freezing and thawing. Therefore, the compaction tests on sandy materials were conducted under various temperature at $-3^{\circ}C$ and $-8^{\circ}C$ with various fine contents of 0%, 5%, 10% and 15% in weight fraction. The effectiveness of soil compaction at below-freezing temperatures were compared with the compaction at room temperature at $18^{\circ}C$ in terms of the maximum dry unit weight and optimum water contents. Based on the test results, the maximum dry unit weight tends to decrease with the freezing temperature and the relative compaction at $-8^{\circ}C$ can not be satisfied with general specification standard.

• Korean Journal of Agricultural Science
• /
• v.23 no.1
• /
• pp.39-50
• /
• 1996

The normal cement concrete is widely used material to build the construction recently, but it has a fault to increase the dead load on account of its unit weight is large compared with strength. So, many engineers are continuously searching for new materials of construction to provide greater performance at lower density. Many studies were carried out on the lightweight aggregate concrete in foreign country in the latter half of the 19th century, therefore lightweight aggregate concrete has been used successfully for many years for structural members. The main purpose of the work described in this paper were to establish its physical and mechanical properties of no-fines lightweight concrete using synthetic lightweight coarse aggregates. Test results are summarized as follows ; The water-cement ratio was shown less than 33% in use synthetic lightweight coarse aggregates, unit weights of synthetic lightweight concrete was shown less than $1,800kg/m^3$ and compressive strength was higher than $200kg/m^2$. And the pulse velocity was more than 3,000m/sec. The relationship of compressive strength between unit weight and pulse velocity was shown to be approximately linear.

• Korean Chemical Engineering Research
• /
• v.48 no.6
• /
• pp.791-794
• /
• 2010

This study presents channel design of a CDI stack to achieve high removal efficiency in a large scale by applying parallel flow structure with a concentrated stream. The flow pattern in the stack was simulated by COMSOL Multiphysics program. To prove the salt removal performance, a unit cell and 20 cell stacks were tested at a flow rate condition of 18 ml/min and 360 ml/min, respectively. The removal efficiencies of the unit cell and the 20 cell stacks were obtained as 70.8 % and 75.6 %, respectively, with 100 mg/L sodium chloride solution. During the operation of cell test, water pressures of unit cell and 20 cell pair stack maintained in the ranges of 1.1 psi and 1.3~1.5 psi, respectively. It was demonstrated that the parallel cell structure with two concentrated streams can be employed in a large scale CDI for salt removal.