Simian malaria is a zoonotic disease caused by Plasmodium knowlesi infection. The common natural reservoir of the parasite is the macaque monkey and the vector is the Anopheles mosquito. Human cases of P. knowlesi infection has been reported in all South East Asian countries in the last decade, and it is currently the most common type of malaria seen in Malaysia and Brunei. Between 2007-2017, 73 cases of P. knowlesi infection were notified and confirmed to the Ministry of Health in Brunei. Of these, 15 cases (21%) were documented as work-related, and 28 other cases (38%) were classified as probably related to work (due to incomplete history). The occupations of those with probable and confirmed work related infections were border patrol officers, Armed Forces and security personnel, Department of Forestry officers, boatmen and researchers. The remaining cases classified as most likely not related to work were possibly acquired via peri-domestic transmission. The risk of this zoonotic infection extends to tourists and overseas visitors who have to travel to the jungle in the course of their work. It can be minimised with the recommended use of prophylaxis for those going on duty into the jungles, application of mosquito/insect repellants, and use of repellant impregnated uniforms and bed nets in jungle camp sites.
This study obtains preliminary data through a multifaceted examination of work undertaken by soldiers and factors that should be considered in the development of wearable robots; in addition, the study explores the development direction for such robots in this segment. This study conducted a survey on males who had military experience in order to analyze work practices. The results of the survey indicate that there has been an existing need for wearable robots for soldiers and that soldiers prefer robots equipped with functions to support specific physical activities and those that offer comfort while being worn. In addition, it was found that the method to wear robots should be developed according to the body part that considered movements performed by soldiers. It was also found that strengthening functionality over aesthetic factors is extremely important. Soldiers desired wearable robots that could assist their main activities, protect their bodies, and incorporated an excellent system in terms of wearability.
This study aims to derive the design requirements for functional clothing worn with military wearable robots using a survey of people with military experience. Specifically, 982 adult males with military and muscular exercise experience were surveyed for their demands for the clothing worn with wearable robots during military activities. The study showed that it is necessary to develop functional clothing worn inside robots suitable for frequent movements of soldiers to improve their comfort level of wearable robots. The surveyed soldiers indicated that they preferred the top and bottom clothing with high-pressure levels because the upper body felt fatigued during transportation, while both the upper and lower body got exhausted during marches. The survey of design requirements revealed that the participants preferred a top with long sleeves and a bottom with ankle-length leggings in color similar to current military uniforms. We conclude that it is important to design functional clothing worn inside wearable robots in different forms depending on frequent movements, e.g., with differentiated pressures and material placements.
Suitability for the human body, freedom to move and thermal insulation are important design considerations in military clothing. This study investigates the performance and wearer-satisfaction of the functional inner winter uniform currently used in Korea; it is hoped that our data can inform the development of a future version. Interviews were conducted, in which the participants suggested various improvements. The uniforms were mainly worn for guard duty or as daily attire in cold weather. The participants chose how many layers to wear according to the current situation, rather than sticking to the layering recommended in the manual. Layering choices did not significantly affect combat efficiency but were found to affect wearers' comfort. Wearers' satisfaction was found to depend on the convenience of the clothing, whether it was in the appropriate size, freedom to move and thermal insulation. Also, this study suggests a problem with the current size system, as the analysis of size distribution, across all sizes, the range of current production is insufficient to cover the demand.
Titanium exhibits substantial corrosion resistance, strength, and ductility, with a specific gravity of approximately 4.5 and a melting point of approximately 1800℃. It is currently used in aircraft parts and space development. This study considered the thermal characteristics, stealth effects of infrared thermal imaging cameras, electromagnetic shielding, and electrical conductivity of Ti-sputtered materials. Base materials of different densities and types were treated using titanium sputtering. Infrared thermal imaging showed a better stealth effect when the titanium layer was directed toward the outside. The film sample presented a better stealth effect than the fabrics did. In each of the samples subjected to titanium sputtering, when the titanium layer was directed outward, the untreated sample or exposed titanium layer showed surface temperatures lower than those of the samples with the titanium layer oriented toward the heat source. Additionally, after the titanium sputtering treatment, the films conducted electricity (low resistance) better than the fabrics did. All titanium-sputtered specimens presented reduced electromagnetic wave transmission and significantly reduced infrared transmission. These results are expected to apply to military uniforms (soldiers' protective clothing to gain the upper hand on the battlefield), medical sensors, multifunctional intelligent textiles and etc.
To analyze the status and needs of the small- and medium-sized garment manufacturing industry in Busan, this study comprised an online survey of companies and interviews with 14 representatives of the 98 companies. The results are as follows: Approximately 34.7% of the garment manufacturers were located in Geumjeong-gu, Busan. The most common type of work was the contracting factory type. Daily production output was between 100pcs and 300pcs. Production materials comprised 42.9% woven and 24.8% knitted fabrics. Main products were menswear, uniforms, womenswear, casual wear, sports and leisure wear, protective clothes, and children's clothing. The main clients were uniform companies, main factories, wholesale markets, online shopping malls and promotion companies, exporters, and department stores. As a result of a survey on industrial needs with company representatives, their satisfaction with company employees was 57.2%, and the most important factor when hiring employees was job-related competencies, among which the ability to understand the sewing process was the most necessary. In terms of computer software literacy, illustrations and pattern CAD/CAM are required. They thought industry-university cooperation is crucial for advantage for advantage research and product development, as it allows for the sharing knowledge, resources, and especially human resources. The greatest administrative issue were human resources and funding.
This study aimed to create globally acceptable Hanbok-inspired work uniforms, by developing practical designs and providing useful resources for incorporating Hanbok characteristics into office attire. First, to establish the elements that the Hanbok work uniform should have, the definition and characteristics of service clothes and preferences for the process of modernization of traditional Hanbok were reviewed through a review of the preceding studies. For the Hanbok work uniform design, a total of 4 pieces, 2 for each male and female, were planned, a schematic diagram was created, and the design was modified after evaluation by fashion design experts. I made a pattern of the modified design with a CAD program, imported it into CLO 3D to produce a virtual costume, and confirmed the final design draft. Work uniform design has symbolism, functionality, and aesthetics as its characteristics. The functionality of the Hanbok work uniform designed in this study is suitable for the season, and it was designed to increase the efficiency of work when worn for a long time. The design was focused on the development of materials and patterns in consideration of comfort and activity. The esthetic nature of hanbok-inspired work clothes was intended to reveal details that could highlight the silhouette of the human body and reflect the beauty of hanbok.
The objectives of this study were to determine the recognition of food waste, school lunch leftovers and satisfaction toward school lunch in middle school students in Seoul. Four hundred students were surveyed beginning April, 2007. The results are summarized as follows. The primary means in which students learned about environmental pollution were 'video media' (54.7% males, 39.2% females) and 'by teachers' (23.2% males, 33.0% females). The primary effects on food habits after participating in the school lunch program were 'having a balanced diet' (23.3%) in the females, and 'decreased intake of junk food' (24.9%) in the males. The serving sizes for cooked rice, soup, and meat were higher in the females (3.46, 3.46, and 2,91, respectively) than the males (3.18, 3.29, and 2.73, respectively). The primary school lunch leftovers for one week were cooked rice (4.55), meat (4.35), kimchi (3.84), fish (3.60), vegetables (3.38), and soup (3.08). Importance-performance analysis of the school lunch meal indicated that good taste had high importance, but low performance. Nutritional balance, food safety, cleanliness of tableware and supplies, clean uniforms of employees, and cleanliness of the dining area had both high importance and performance.
It is intended to study the colors of work environment and the working clothes colors between humans and environment with application of the arrangement of working clothes colors to domestic machinery companies that play pivotal roles in the industry of Korea. The purpose of this study is to provide the foundation of color plan for the integrated environmental harmonization and the safety of industrial sites by analyzing the photographs of working clothes in the sires in consideration of the functions of colors (clearness, attention-getting, and safety) using the Faber Birren's Color Harmony and by analyzing the result of a questionnaire survey. The study was conducted by the method to shoot a worksite using a digital camera after wearing 24 sets of uniforms, which were developed by the color plan established in a previous study, in the same worksite. The shooting place was an outdoor steel sheet inspection site of D company, a machinery company in Changwon-si, Gyeongnam, and the intensity of illumination was 2400lux. 24 pieces of images were printed in 5x7 inch size and a questionnaire survey was performed at 5-point scale. The questionnaire survey was performed for 13 subjects consisting of 6 field professionals having more than 30 years of experiences, 4 clothes color professionals, and 3 industrial engineering professionals. The result of the survey was statistically analyzed by the method of frequency analysis using IBM SPSS Statistics 20 Program. As the result of assessment of basic four colors (yellow green, sky blue, blue, and violet) of working clothes, yellow green, sky blue, and blue showed high mean values in (Tint)+(Shade)+(Tone)+(Gray) equation indicating that its is a harmonized equation.
To increase the productivity and product quality of customized baseball jerseys, this study developed a multi-variable system for a production process that efficiently controls diverse production management factors. The working time was measured through the establishment of a standard process where skilled workers and Chinese factory workers manufactured 5 sets of the same basic design jerseys. Based on the measured working time (1,136 seconds/per unit), the multi-variable process control system was developed, where hourly production management is possible according to the involved workers and equipment types. Each process was assigned accoding to the production management factors for a total of 28 standard processes. The processes were developed based on consideration of work characteristics according to the order of needlework of open-type set baseball jerseys with sleeves(the basic design of baseball jerseys)to result in a customized production system structure that could be set up with multi-variables. As a result, a total 12 types of systems were developed in consideration of the personnel involved and the number of equipments. The optimal production management system (with the highest efficiency compared to the number of workers)was A-2, B-1, C-1. D-2, E-2, F-1, and G-1. This system had extremely high efficiency and showed 99% assignment efficiency for the 7-person team. Though not optimal, possible process assignment for each working personnel is proposed as a reserve process in case work modification is inevitable due to malfunctions and the absence of equipments.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.