• Geotechnical Engineering
• /
• v.12 no.1
• /
• pp.47-62
• /
• 1996

The bedding zone which influence directly to the safety of dam is supporting the face slab under hydraulic load in concrete faced rockfill dam. In case that leakage is developed due to various ruptured joint or cracks of face slab and etc., the bedding zone should limit the leakage by low permeability and keep the internal stability. In this study for the proper coefficient of permeability various properties, such as gradation, dry density, performance of embankment work and etc. were analysed. The results from the large scale test of permeability and density are summerized as follows : 1. Coefficient of permeability is decreased clearly by increase of dry density. 2. The particles smaller than the No.4 strive( p,) greatly influences the permeability under dry density of 2.24t 1 m3. 3. In case of C.40 and p,40%, even if dry density decreased to 2.0t/m3, the permeability coefficient is assumed to u x1-scm/s and internal stability is abtained. 4. Generally in dam construction since dry density and uniformity coefficient of bedding zone were higher than 2.2t/m3 and 50 respectively p, of 30~40% is assumed to be suitable and permeability coefficient of below 1$\times$10-3cm l s is expectable.

• Journal of the Korean Ceramic Society
• /
• v.34 no.8
• /
• pp.908-913
• /
• 1997

Multilayer NbCxC1-x/Y2O3/Ti were sputter-coated on the alumina substrate, starting with a 0.7 ㎛ thick NbCxC1-x layer grown on substrate, followed by 0.7 ㎛ thick Y2O3 layer and 1 ㎛ thick Ti layer. To find out the optimum conditions for thickness uniformity and adhesion, sputtering works have been done with the variation of sputtering power and Ar pressure. After vacuum annealing at 950℃ and 1000℃, the thermal stability of the NbCxC1-x/Y2O3/Ti coated alumina substrates has been investigated by peel off test. The coating scheme didn't cause any debonded layer after an annealing at 950℃ for 3hrs. However, it was peeled off after annealing at 1000℃ for 3hr. It was found that the thermal stability of Al2O3/NbCxC1-x/Y2O3/Ti coating scheme changed with the NbCxC1-x composition.

• The Journal of Engineering Geology
• /
• v.12 no.2
• /
• pp.189-202
• /
• 2002

In this study we carried out the in situ test in order to explore the grouting effects of fracture zone on mechanical properties and permeability in tunnel. After consolidation grouting the rock mass averaged 2.30 in the modulus of deformation and 2.49 in the modulus of elasticity. The results obtained through this study are as follows. (1) With advance of the injection steps, the total cement take shows uniformity of the rock mass. (2) After consolidation grouting the improvement of permeability can be identified by reduction of Lugeon values. (3) Grouting injection can improve deformability and strength of rock mass. (4) More mechanical improvement appears for more deformable rock mass before grouting injection.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.4
• /
• pp.32-42
• /
• 2013

We study the gap effect on detonating high explosives using numerical simulation. The characteristic acoustic impedance theory is applied to understand the reflection and transmission phenomena associated with gap test of high explosives and solid propellants. A block of charge with embedded multiple gaps is detonated at one end to understand the ensuing detonation propagation through pores and non uniformity of the tested material. A high-order multimaterial simulation provides a meaningful insight into how material interface dynamics affect the ignition response of energetic materials under a shock loading.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.1
• /
• pp.17-25
• /
• 2008

To achieve the unidirectional airflow in a cleanroom, we need to predict accurately the static pressure losses at the lower plenum and to control properly the opening pressure ratio of access floor panels based on these pressure losses. At first, the present study proposed a correlation to predict the velocity distribution at the lower plenum, because the accuracy to predict pressure losses at the lower plenum depends on how to calculate the velocity correctly against the inner structures at the lower plenum. In the second place, this study proposed correlations which considered the effect of inner structures such as columns, ducts and equipments at the lower plenum on pressure losses. In order to test the accuracy of these correlations, we compared air flow patterns before regulating the opening ratio of access floor with those after regulating. Results after regulating the opening ratio of access floor show good unidirectional uniform airflow pattern. So the present method can be used as an important tool to control the air flow in a cleanroom.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.854-859
• /
• 2006

This study aims to evaluate the effect on indoor environment by the application of the shading device on winter season. Therefore, thermal and visual experiments were conducted at two side-by-side mock-Lip test cells which were equipped with the shading device(venetian blind & roll blind) at interior and exterior side of the window. The results of this study are as follows: 1) At night of winter, the shading device can prevent internal heat from going out. 2) Exterior shading device is more effective in winter as well as in summer. 3) At daytime of winter, the shading device can provide the uniformity of illuminance, and the interior shading device is more effective.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.12
• /
• pp.183-189
• /
• 2021

Transfer pricing is a matter of concern for countries. It affects the interests of the parties involved in the commercial transaction. Through manipulation of prices in transactions, businesses take advantage of tax rates in a country to adjust profits for economic gain. This affects the fairness and rationality of economic transactions between related parties. The article uses a two-year time series from 2018 to 2019 of 50 foreign direct investment enterprises in Vietnam. The article uses ordinary least squares to test the hypotheses of the research model. The article uses four independent variables related to ownership structure affecting transfer pricing decisions including total ownership, organization ownership, concentration ownership, and area ownership. Research results show that two variables have a positive influence on transfer pricing decisions including total ownership and organization ownership. Organization ownership has a higher degree of influence than total ownership. To be able to control transaction activities related to transfer pricing, Vietnam's state management agencies need to pay attention to perfecting the legal framework based on supplementing and amending regulations related to transfer pricing. Legal regulations need to be regulated based on international common practices to ensure uniformity on a global scale.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.12
• /
• pp.153-158
• /
• 2021

Convergence is the process of gradual adoption of a certain accounting standard issued by different regulatory bodies. The aim is to achieve uniformity and standardization across borders to open opportunities for international investment and collaboration. The implementation of IFRS, in theory, encourages more transactions by presenting financial statements in a simple and understandable manner for all investors and other businesses interested in the company. Using event study methodology, this study investigates whether Malaysian companies' adoption of IFRS is recognized by the investment community. A total of 89 public listed companies in Bursa Malaysia are involved in this study. The results show that about 62.8 percent of the companies that adopted IFRS-based financial statements experienced an increase in their average abnormal return after the announcement. However, the paired sample test results show that only 5.6 percent out of 89 companies studied experience a significant difference in abnormal return before and after the announcement. The inexistence of the average abnormal return difference between before and after the announcement may indicate that IFRS-based financial statements do not have any new market informational content. This study found little evidence to show that convergence with IFRS affects the company's stock price in Malaysia.

• Journal of Ocean Engineering and Technology
• /
• v.35 no.2
• /
• pp.150-160
• /
• 2021

To ensure the international competitiveness of the domestic offshore plant industry, a consensus has been formed regarding the requirement for large offshore basins for performing offshore plant performance verification. Accordingly, the Korea Research Institute of Ships & Ocean Engineering has built the world's largest deep ocean engineering basin (DOEB). The purpose of this study is to evaluate the characteristics of velocity distribution under various conditions of the DOEB. An independent measuring jig is designed and manufactured to measure the current velocities of many locations within a short time. The measurement jig is a 15-m-high triangular-truss structure, and the measurement sensors can move 15 m vertically through an electric motor-wire device. The current speed is measured under various impeller revolutions per minute and locations of the DOEB using the jig. The spatial distribution characteristics of the current velocity in the DOEB and the performance of the current generator are analyzed. The maximum speed is 0.56 m/s in the center of the DOEB water surface, thereby confirming sufficient current velocity distribution uniformity for model testing.

• Food Engineering Progress
• /
• v.15 no.1
• /
• pp.34-40
• /
• 2011

As an attempt to develop a value-added food product, purple sweet potato powder was added in a model system of steamed bread as a healthy food ingredient and physicochemical properties such as moisture content, specific volume, spread ratio, color, texture as well as consumer preferences on the attributes such as uniformity, color, flavor, elasticity, chewiness, taste, and overall preference were evaluated. Moisture content ranged from 44.16 to 44.55% (wet basis) and appeared independent on the level of purple sweet potato (PSP) powder incorporation. As a result of the addition of PSP powder, the specific volume of steamed bread decreased from 3.22 to 2.55 mL/g, and value of 4.5% sample was significantly lower than other samples (p<0.05). On the other hand, spread ratio ranged from 2.01 to 2.53, and appeared to decrease as the PSP powder concentration increased (p<0.05), indicating a significant improvement. Lightness $(L^*)$ decreased significantly as the PSP powder content increased (p<0.05) for both dough and skin of the steamed bread. In addition, an increasing trend in redness ($a^*$-value) and a decreasing trend in yellowness ($b^*$-value) were noticed. Firmness increased significantly with the addition of PSP powder regardless of concentration (p <0.05); however, firmness was not significantly different among samples containing 1.5-4.5% PSP powder (p>0.05). Consumer acceptance test indicated that incorporation of 3% PSP powder in the formulation of steamed breads would be recommended.