• Wind and Structures
• /
• 제30권6호
• /
• pp.649-662
• /
• 2020

The existence of a dam has potential effects on the surrounding wind environment especially when it is located in mountainous areas. In this situation, the long-span bridge over the reservoir can easily be exposed to non-uniform incoming flows, affecting its wind-resistance performance. This paper presents a study on the aerostatic stability of such a bridge. Wind tunnel tests were first carried out to investigate the wind environment above a mountainous reservoir. The results show that the angle of attack and the wind speed along the bridge axis show obvious non-uniform characteristics, which is related to the inflow direction. When winds come from the south where the river is winding, the angle of attack varies along the span direction significantly. The finite element model for the bridge was established using ANSYS software, and effects of non-uniform wind loads on the aerostatic stability were computed. Non-uniform angle of attack and wind speed are unfavorable to the aerostatic stability of the bridge, especially the former. When the combined action of non-uniform angle of attack and wind speed is considered, the critical wind speed of aerostatic instability is further reduced. Moreover, the aerostatic stability of the bridge is closely related to the dam height.

• 한국항해항만학회지
• /
• 제46권6호
• /
• pp.491-500
• /
• 2022

큰 상부 형상을 가지는 FLNG (Liquefied Natural Gas Floating Production Storage Offloading Units, LNG FPSOs) 등의 해양구조물은 안정적인 운동성능 확보 및 계류라인 설계에 있어 정도 높은 풍하중 추정이 필수적이다. 따라서 본 연구의 목적은 FLNG의 풍하중 추정을 위한 수치해석 기법을 개발하는 데 있다. 특히, 본 연구에서 개발한 수치해석 기법은 저자의 이전연구를 FLNG에 맞추어 수정하였다. 풍하중 추정을 위한 수치해석은 15° 간격으로 0-360° 범위에서 균일 풍속 조건과 풍속 프로파일을 적용한 NPD (Norwegian Petroleum Directorate) 조건에서 수행하였다. 먼저, NPD 모델 풍속 프로파일 모델 개발을 위해 Sand-Grain Roughness 변화에 따른 풍속 프로파일을 분석하였다. 개발된 NPD 모델을 이용하여 3가지 풍향 (Head, Quartering & Beam)에 대한 메쉬 수렴성 시험을 수행하였다. 최종적으로 개발된 NPD 모델과 메쉬를 이용하여 균일한 풍속 조건과 NPD 조건에서의 풍하중을 평가하고 비교하였다. 본 연구에서는 RANS (Reynolds-averaged Navier-Stokes) 기반 Solver인 STAR-CCM+ (17.02)를 이용하였다. 결과를 요약하면, 풍속 프로파일을 적용한 NPD 모델에서의 풍하중은 균일 풍속(10m/s) 조건과 비교하여, Surge와 Yaw 하중이 최대 20.35 % 와 34.27% 증가하였다. 특히, 특정 일부 구간에서만 큰 하중의 차이를 보인 Sway (45°< α < 135°, 225°< α < 315°)와 Roll (60° < α < 135°, 225° < α < 270°)은 구간별 평균 증가율이 15.60%와 10.89% 수준으로 나타났다.

• 해양환경안전학회지
• /
• 제26권7호
• /
• pp.922-930
• /
• 2020

지난 10년간 복원력 상실에 의한 어선의 해양사고가 지속해서 증가하고 있으며, 갑작스러운 강풍이 주요 원인으로 지적되고 있다. 이러한 강풍에도 견딜 수 있는 어선의 운동·조종성능을 확보하기 위해서는 정밀한 풍하중 예측 기법이 우선되어야 한다. 따라서 본 연구에서는 전산유체역학 기법을 이용한 어선의 풍하중 평가기법을 개발하고자 한다. 특히, 고도 변화에 따라 풍속이 변화하는 계산환경을 모사하여 그 결과를 균일한 속도분포를 가정한 수치해석 결과와 비교 분석하고자 한다. 본 연구에서는 0-180°까지 15° 간격으로 13개의 방향에 대해 풍하중을 계산하였으며, 계산에 사용된 메쉬 모델은 메쉬 의존성 시험을 수행하여 개발하였다. 전산수치해석은 RANS(Reynolds-averaged Navier-Stokes) 기반 상용 해석 Solver인 STAR-CCM+(Ver. 13.06)와 k-ω 난류 모델을 이용하여 정상상태(Steady State) 유동해석을 수행하였다. 수치해석결과를 간략히 살펴보면 Surge, Sway 및 Heave에서 39.5 %, 41.6 % 및 46.1 % 풍하중이 감소하였으며 Roll, Pitch 및 Yaw에서 48.2 %, 50.6 % 및 36.5 % 감소하였다. 결론적으로 본 연구에서는 고도에 따른 풍속 변화 모델을 통해 기존보다 정밀한 수준의 풍하중 추정이 가능한 것을 확인하였으며, 그 결과가 선박의 풍하중 추정 평가기법 발전에 이바지하길 기대한다.

• 한국정밀공학회지
• /
• 제30권12호
• /
• pp.1287-1293
• /
• 2013

In this paper, we consider variable speed wind turbine systems containing uncertain elements. Though PI controller is generally used for pitch control, it cannot guarantee a stability and performance of the complicated wind turbine systems. A robust pitch control scheme is proposed to regulate the electric power output above the rated wind speed. The pitch controller is designed in order to guarantee uniform boundedness and uniform ultimate boundedness based on the bound values of the set where the uncertainties are laid or moves. In order to verify the proposed control scheme, we present stability analysis and simulation results using Matlab/Simulink.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.387-390
• /
• 2007

Recently the diameter of the 5MW wind turbine reaches 126m, and the tower height is nearly the same with the wind turbine diameter. The blade will experience periodic inflow oscillation due to blade rotation inside the ground shear flow region, that is, the inflow velocity is maximum at uppermost position and minimum at lowermost position. In this study we compare the aerodynamic data between two inflow conditions, i.e, uniform flow and normal wind profile. From the computed results all of the relative errors for oscillating amplitudes increased due to the ground shear flow effect. Especially My at hub and $F_x$, $M_y$, $M_z$ at LSS increased enormously. It turns out that the aerodynamic analysis including the ground shear flow effect must be considered for fatigue load analysis.

• Wind and Structures
• /
• 제17권4호
• /
• pp.419-433
• /
• 2013

This paper investigates the vertical profiles of horizontal mean wind speed and direction based on the synchronized measurements from a Doppler radar profiler and an anemometer during 16 tropical cyclones at a coastal site in Hong Kong. The speed profiles with both open sea and hilly exposures were found to follow the log-law below a height of 500 m. Above this height, there was an additional wind speed shear in the profile for hilly upwind terrain. The fitting parameters with both the power-law and the log-law varied with wind strength. The direction profiles were also sensitive to local terrain setups and surrounding topographic features. For a uniform open sea terrain, wind direction veered logarithmically with height from the surface level up to the free atmospheric altitude of about 1200 m. The accumulated veering angle within the whole boundary layer was observed to be $30^{\circ}$. Mean wind direction under other terrain conditions also increased logarithmically with height above 500 m with a trend of rougher exposures corresponding to lager veering angles. A number of empirical parameters for engineering applications were presented, including the speed adjustment factors, power exponents of speed profiles, and veering angle, etc. The objective of this study aims to provide useful information on boundary layer wind characteristics for wind-resistant design of high-rise structures in coastal areas.

• Wind and Structures
• /
• 제36권1호
• /
• pp.1-14
• /
• 2023

To evaluate the wind shielding effect of bridge towers with multiple limbs on high-speed trains, a wind tunnel test was conducted to investigate the aerodynamic characteristics of vehicles traversing multi-limb towers, which represented a combination of the steady aerodynamic coefficient of the vehicle-bridge system and wind environment around the tower. Subsequently, the analysis model of wind-vehicle-bridge (WVB) system considering the additional moments caused by lift and drag forces under nonuniform wind was proposed, and the reliability and accuracy of the proposed model of WVB system were verified using another model. Finally, the factors influencing the wind shielding effect of multi-limb towers were analyzed. The results indicate that the wind speed distributions along the span exhibit two sudden changes, and the wind speed generally decreases with increasing wind direction angle. The pitching and yawing accelerations of vehicles under nonuniform wind loads significantly increase due to the additional pitching and yawing moments. The sudden change values of the lateral and yawing accelerations caused by the wind shielding effect of multi-limb tower are 0.43 m/s² and 0.11 rad/s² within 0.4 s, respectively. The results indicate that the wind shielding effect of a multi-limb tower is the controlling factor in WVB systems.

• 천문학회보
• /
• 제42권2호
• /
• pp.68-68
• /
• 2017

Measurements of solar wind speed near the Sun (< 0.1 AU) are important for understanding acceleration mechanism of solar wind as well as space weather predictions, but hard to directly measure them. For the first time, we provide 2D solar wind speed maps in the LASCO field of view using three consecutive days data. By applying the Fourier convolution and inverse Fourier transform, we decompose the 3D intensity data (r, PA, t) into the 4D one (r, PA, t, v). Then, we take the weighted mean along speed to determine the solar wind speeds that gives V(r, PA, t) in every 30 min. The estimated radial speeds are consistent with those given by an artificial flow and plasma blobs. We find that the estimated speeds are moderately correlated with those from slow CMEs and those from IPS observations. A comparison of yearly solar wind speed maps in 2000 and 2009 shows that they have very remarkable differences: azimuthally uniform distribution in 2000 and bi-modal distribution (high speed near the poles and low speed near the equator) in 2009.

• 한국항공우주학회지
• /
• 제44권5호
• /
• pp.399-406
• /
• 2016

대형 풍력터빈은 지상 전단 흐름 내에서 회전하면서 주기적인 유입속도의 변동 조건 하에 운용된다. 수직 전단흐름에 의해서 경계층 내의 유입 속도는 최고점에서 속도가 최대가 되고 최저점에서 속도가 최소가 된다. 이러한 공간적인 풍속 분포는 풍력터빈 로터의 허브와 저속회전축에서 6분력 하중에 대한 주기적인 진동을 야기한다. 본 연구에서는 수직 전단 흐름 효과를 무시한 균일 흐름장과 지상 전단 흐름효과를 고려한 두 가지 경우에 대한 공력 하중을 비교분석하였다. 계산 결과로부터 허브에서의 추력과 굽힘모멘트, LSS의 굽힘모멘트가 크게 변동하는 결과를 보여주었다. 따라서 지상 전단흐름 효과를 반영한 공력 해석이 피로 해석을 위해서 반드시 필요함을 확인하였다.

• Journal of Biosystems Engineering
• /
• 제26권5호
• /
• pp.431-440
• /
• 2001

Generated agri-chemical droplets by orchard sprayers are evaporated regenerated and transported along wind streams. The droplets are deposited to targets after changing their sizes, affecting the retention of droplets. An orchard sprayer, designed for spraying grapevines was studied on the spatial distribution of droplet size. The experimental variables were spray direction (0, 22.5, 45, 67.5 and 90˚), distance(2.5, 3.0 and 3.5 m) and fan speed (2,075 and 3,031 rpm). Droplet sizes were converted and analyzed from spray stains, sampled using water sensitive papers. The number median diameter (NMD) increased with an increase of the distance due to disappeared fine droplets (<50 ㎛): however, the volume median diameter (VMD) decreased due to shrunken large droplets (>100 ㎛). Fast fan speed delivered large droplets to 3.5 m, but the spatial distributions of NMD and VMD were not uniform. Slower fan speed decreased the possibility of evaporation and drift; therefore, plenty of droplets were maintained up to 3.0 m. The upward blasting distance was limited within 3 m, but the limit to the ground level was extended to 3.5 m. Concentrated wind and droplets to the ground level should be redistributed to upper canopy direction, leading more uniform deposits. High speed wind and system pressure should be avoided because of generating fine droplets, which would be disappeared and drifted away.