• 대한기계학회논문집
• /
• 제18권12호
• /
• pp.3297-3304
• /
• 1994

Experimental investigation have been made to study the double-diffusive nature of convection of an initially stratified salt-water solution heated from below in a cylindrical cavity. The objective is to examine the process of mixed-layer formation, the flow phenomena, the heat transfer characteristics, and temperature and concentration distribution according to the changes in the effective Rayleigh number based on the reference height which represents the relation of temperature and concentration gradient. The types of initially formed flow pattern are categorized in three regimes depending on the effective Rayleigh number ; stagnant flow regime, single mixed-layer flow regime and successively formed multiple mixed-layer flow regime. The temperature and concentration profiles are both uniform in each layer due to convective mixing in the layered flow regime, but both linear in stagnant flow regime and single mixed-layer flow regime. At the interface between adjacent layers, the temperature changes smoothly but the concentration changes rapidly. The layers expand by diffusion of concentration through the interface along with its random fluctuation.

• 대한기계학회논문집
• /
• 제19권7호
• /
• pp.1731-1740
• /
• 1995

Experimental investigations have been made to study the double-diffusive nature of convection of an initially stratified salt-water solution due to heating from below in a rotating cylindrical cavity. The objective is to examine the flow phenomena and the heat transfer characteristics according to the changes in temperature gradient, concentration gradient and rotating velocity of cavity. Thermal and solutal boundary conditions at side wall are adiabatic and impermeable, respectively. The top and bottom plate are maintained each at constant temperature and concentration. The cavity is put into a state of solid body rotation. Like the stationary case, the types of initially-formed flow pattern are classified into three regimes depending on the effective Rayleigh number and Taylor number; stagnant flow regime, single mixed-layer flow regime and successively formed multi-mixed layer flow regime. At the same effective Rayleigh number, the number of initially-formed mixed layer and its growth rate decrease as the effect of rotation increases. The temperature and concentration profiles are both uniform in each layer due to convective mixing in the layered-flow regime, but look both liner in stagnant flow regime and single mixed-layer flow regime. At the interface between adjacent layers, the temperature changes smoothly but the concentration changes rapidly.

• 한국전산유체공학회지
• /
• 제15권4호
• /
• pp.9-16
• /
• 2010

To alleviate NOx emission, a variety of approaches has been applied. In marine diesels, the application of SCR systems has been considered an effective exhaust aftertreatment method for NOx emission control. Most current SCR systems use a various catalyst for the reaction of ammonia with NOx to form nitrogen and water. In theory, it is possible to achieve 100% NOx if the $NH_3$-to-NOx ratio is 1:1. However, the reaction has a limited non-uniformity of the exhaust gas flow and ammonia concentration distribution. Therefore, it is necessary to investigate the optimum flow conditions. In order to achieve uniform flow at monolith front face, we are equipped with a various mixed devices. In this paper, it is presented that the mixed devices play an important role improvement of flow patterns and particle distributions of $NH_3$ by numerical simulation.

• Journal of the Korean Wood Science and Technology
• /
• 제27권3호
• /
• pp.39-50
• /
• 1999

라디에타소나무, 케루잉, 딜레니아, 터미날리아 및 칼로필롬 단판에 내화약제로서 20% 제2인산암모늄 수용액을 상압 침지 및 진공가압침지 처리한 시험을 실시 하였으며, 라디에타소나무와 케루잉 단판의 구성형태와 내화약제의 침지처리 조건들을 여러형태로 조합한 합판을 요소 멜라민 수지와 페놀수지 접착제를 사용하여 제조하였다. 결과, 라디에타소나무가 케루잉보다 약제보유도 및 처리효과가 뛰어났으며, 진공가압침지가 상압침지보다 약제보유면에서는 유효하였다. 그리고, 기계적 성질에 있어 단판첨지법으로 내화처리를 하여 제조한 합판이 반드시 접착력 및 휨강도적 성질의 저하를 가져오지는 않았으며, 내화성에 있어서는 요소 멜라민수지 접착이 우수한 성능을 보였다. 결과적으로, 접착 강도성능과 내화성능을 고려한 단판 수종의 적정한 선택, 층간구성(조합) 및 교호약제처리가 실제 사용시 가능할 것이다.

• 한국염색가공학회지
• /
• 제24권1호
• /
• pp.69-78
• /
• 2012

This paper surveys the physical properties of the MWNT dispersion solution dispersed with the three types of solvents and of the polyurethane composite film for improvement of mechanical properties and electrical characteristics of PU/MWNT composite film. For this purpose, the MWNT dispersed solution was mixed with three types of solvent such as IPA, MEK and Toluene and then mixed with polyurethane (100part) with variation of loading content (0, 10, 20, 30, 40, 50 part) of MWNT dispersed solution in the ultrasonic wave dispersion apparatus. And eighteen PU/MWNT composite films were prepared as specimens. The various physical properties of these PU/MWNT films were measured and discussed with the loading content of three types of MWNT dispersed solutions. The highest absorbancy among the three types of dispersed solutions was shown in the IPA/MWNT solution. But the absorbancy of PU/MWNT films was not same as the solution. The low electrical surface and volume resistivity of PU/MWNT film were shown at the condition of 20 and 10 parts loading of IPA/MWNT dispersed solution, respectively. The low triboelectricity of PU/MWNT film was shown at the condition of above 30part loading of IPA/MWNT dispersed solution. The breaking strength and strain of PU/MWNT film prepared with IPA/MWNT dispersed solution were decreased with increasing loading content of IPA/MWNT from 10 to 40 parts. The maximum breaking strength and breaking strain according to the dispersion solution were shown on the IPA/MWNT dispersed solution. The uniform dispersion of PU/MWNT film according to the loading content of MWNT solution was shown by surface image analysis on the films dispersed with IPA.

• 한국대기환경학회지
• /
• 제23권3호
• /
• pp.265-276
• /
• 2007

The primary objective of this study is to investigate the effect of media on the performance of biofilters. Two types of experiments were carried out in this study. The first type of experiment used a biofilter with the media composed of three different packing materials of compost, peatmoss and GAC(granular activated carbon), whereas the second type used a biofilter with the media composed of compost only. It was found from the two experiments that the biofilter composed of compost, peatmoss and GAC showed better performance than the one composed of compost only with the higher toluene removal efficiency, lower pressure drop, and more uniform media moisture content. In particular, no appreciable media compression occurred for the biofilter composed of compost, peatmoss and GAC, whereas significant media compression took place in the biofilter composed of compost only. As suggested by the other researchers, it is likely that GAC may be responsible for the higher toluene removal efficiency in the case of the biofilter composed of mixed media especially for the early stage of biofiltration due to its adsorption capability of toluene of such high concentration as 300 ppm. It was also regarded that GAC may playa major role in maintaining lower media pressure drop in the case of the mixed media than the media with compost only because of its mechanical strength resisting to the compression. Nonetheless, further refined experiments may need to draw more accurate conclusion. The results of the additional test run using the same mixed media showed that the biofilter system using the mixed media can be consistently operated for more than 100 days very stably despite sudden change in operating conditions of temperature and flow rate.

• 대한산업공학회지
• /
• 제41권3호
• /
• pp.233-242
• /
• 2015

This paper analyzes a multi-product inbound lot-sizing and outbound dispatching problem with multi-vehicle types in a third-party logistics distribution center. The product must be delivered to the customers within the delivery time window and backlogging is not allowed. Replenishing orders are shipped by several types of vehicles with two types of the freight costs, i.e., uniform and decreasing, are considered. The objective of this study is to determine the lot-size and dispatching schedules to minimize the total cost with the sum of inbound and outbound transportation and inventory costs over the entire time horizon. In this study, we mathematically derive a mixed-integer programming model and propose a genetic algorithm (GA1) based on a local search heuristic algorithm to solve large-scale problems. In addition, we suggest a new genetic algorithm (GA2) with an adjusting algorithm to improve the performance of GA1. The basic mechanism of the GA2 is to provide an unidirectional partial move of products to available containers in the previous period. Finally, we analyze the results of GA1 and GA2 by evaluate the relative performance using the gap between the objective values of CPLEX and the each algorithm.

• Korean Journal of Radiology
• /
• 제22권10호
• /
• pp.1708-1718
• /
• 2021

Objective: The purpose of this study was to evaluate the magnetic resonance (MR) characteristics and applicability of new, uniform, extremely small iron-based nanoparticles (ESIONs) with 3-4-nm iron cores using contrast-enhanced magnetic resonance angiography (MRA). Materials and Methods: Seven types of ESIONs were used in phantom and animal experiments with 1.5T, 3T, and 4.7T scanners. The MR characteristics of the ESIONs were evaluated via phantom experiments. With the ESIONs selected by the phantom experiments, animal experiments were performed on eight rabbits. In the animal experiments, the in vivo kinetics and enhancement effect of the ESIONs were evaluated using half-diluted and non-diluted ESIONs. The between-group differences were assessed using a linear mixed model. A commercially available gadolinium-based contrast agent (GBCA) was used as a control. Results: All ESIONs showed a good T1 shortening effect and were applicable for MRA at 1.5T and 3T. The relaxivity ratio of the ESIONs increased with increasing magnetic field strength. In the animal experiments, the ESIONs showed peak signal intensity on the first-pass images and persistent vascular enhancement until 90 minutes. On the 1-week follow-up images, the ESIONs were nearly washed out from the vascular structures and organs. The peak signal intensity on the first-pass images showed no significant difference between the non-diluted ESIONs with 3-mm iron cores and GBCA (p = 1.000). On the 10-minutes post-contrast images, the non-diluted ESIONs showed a significantly higher signal intensity than did the GBCA (p < 0.001). Conclusion: In the phantom experiments, the ESIONs with 3-4-nm iron oxide cores showed a good T1 shortening effect at 1.5T and 3T. In the animal experiments, the ESIONs with 3-nm iron cores showed comparable enhancement on the first-pass images and superior enhancement effect on the delayed images compared to the commercially available GBCA at 3T.

• 복식
• /
• 제30권
• /
• pp.183-200
• /
• 1996

The purpose of this study is to examine the custume of Stone statues in roylal tombs and graves in Shilla dynasty. Stone statues in royal tombs and graves in Shilla dynasty. Stone statues in royal tombs and graves are divided into statues of the twelve horary signs(十二支像) and stone figure of a man(石人像). The results are as follows. 1. Statues of the twelve horary signs are found eleven in royal tombs and graves. First statues of the twelve horary signs in assumed Shinmunwangrung(推定神文王陵) wear long robe(長袍) pants(袴) skirt(裙) It says that the costume element of Shilla and the costume element of Tang are mixed. But statues of the twelve horary signs was developed as a tutelary god. Statues of the twelve horary signs in Kimyoushinmyo(金庾信墓) wear jacket pants(袴) instead of long robe(長袍). Also as attaching instead of long robe. Also as attaching other color cloth in collar of jacket or not they are showing dress of mulitary officer. next statues of the twelve horary signs in Hondokwangrung(憲德王陵) wear long robe(長袍) pants(袴). it says that they imitate assumed Shinmunwangrung(推定神文王陵) Kimyoushinmyo(金庾信墓). And statues of the twelve horary signs in the rest of royal tombs and graves put on decorative armor. 2. Stone figure of a man are found is Song-dokwangrung(聖德王陵) Wonsongwangrung(元聖王陵), Hungdokwangrung(興德王陵) and divided into two types. Type 1 wear long robe(長袍) and Yangdang(裲襠). They stend for the best dress uniform of military officer. Type 2 wear Danreong(團領) with side slash. They stend for common soldier.

• 한국환경과학회지
• /
• 제22권7호
• /
• pp.837-845
• /
• 2013

This study was designed to synthesize mesoporous carbon, porous carbonic material and to characterize its surface in an attempt to adsorption methane gas($CH_4$). Synthesis of mesoporous carbon was carried out under two steps ; 1. forming a RF-silica complex with a mold using CTMABr, a surfactant, and TEOS, raw material of silica, and 2. eliminating silica through carbonization and HF treatment. The mesoporous carbon was synthesized under various conditions of synthesis time and calcination. Eight different types of mesoporous carbon, which were designated as MC1, MC2, MC3, MC4, MCT1, MCT2, MCT3, and MCT4, were prepared depending upon preparation conditions. The analysis of mesoporous carbon characteristics showed that the calcination of silica stabilized the mixed structure of silica and carbonic complex, and made the particle uniform. The results also showed that hydrothermal synthesis time did not have a strong influence on the size of pore. The bigger specific surface area was obtained as the hydrothermal synthesis time was extended. However, the specific surface area was getting smaller again after a certain period of time. In adsorption experiments, $CH_4$ was used as adsorbate. For the case of $CH_4$, MCT3 showed the highest adsorption efficiency.