• 마이크로전자및패키징학회지
• /
• 제31권2호
• /
• pp.36-44
• /
• 2024

구리 전해 도금 기술은 반도체 패키징 및 반도체, 이차 전지 등 다양한 마이크로 전자 산업 분야에서 구리 박막 또는 배선의 제조를 위해 사용되고 있으며, 각 응용처에서 요구하는 특성을 획득하기 위해 이들 구리 박막 또는 배선의 미세조직을 제어하고자 광범위한 연구가 이루어지고 있다. 본 연구에서는 기계적 물성이 우수한 이차 전지용 구리 박막을 제조하기 위해, 이차 전지 제조 공정 중 기계적 또는 열적 하중에 의한 박막의 소성 변형 시 박막을 구성하는 결정립들의 결정학적 이방성의 영향성을 조사하였다. 이를 위해, 상이한 집합조직이 발달한 2 종류의 10 ㎛ 두께 전해 도금 구리 박막에 대해 전자 후방 산란 (electron backscattering diffraction or EBSD) 기술을 이용하여 표면 또는 단면의 결정 방위 지도를 측정하였고, 이들을 초기 입력 정보로 한 결정소성 유한요소해석을 통해 1축 인장 변형에 따른 박막 내부의 국부적 변형 거동을 분석하였다. 이를 통해, 인장 변형률의 증가에 따른 박막 내 소성 변형 불균질성과 집합조직의 변화를 추적하였고, 불균질한 소성 변형을 일으키는 결정립의 결정 방위를 확인하였다.

• Geomechanics and Engineering
• /
• 제8권4호
• /
• pp.541-557
• /
• 2015

This research aims to analyze the fracture coalescence characteristics of brittle sandstone specimen ($80{\times}160{\times}30mm$ in size) containing various flaws (a single fissure, double squares and combined flaws). Using a rock mechanics servo-controlled testing system, the strength and deformation behaviours of sandstone specimen containing various flaws are experimentally investigated. The results show that the crack initiation stress, uniaxial compressive strength and peak axial strain of specimen containing a single fissure are all higher than those containing double squares, while which are higher than those containing combined flaws. For sandstone specimen containing combined flaws, the uniaxial compressive strength of sandstone increase as fissure angle (${\alpha}$) increases from $30^{\circ}$ to $90^{\circ}$, which indicates that the specimens with steeper fissure angles can support higher axial capacity for ${\alpha}$ greater than $30^{\circ}$. In the entire deformation process of flawed sandstone specimen, crack evolution process is discussed detailed using photographic monitoring technique. For the specimen containing a single fissure, tensile wing cracks are first initiated at the upper and under tips of fissure, and anti-tensile cracks and far-field cracks are also observed in the deformation process; moreover anti-tensile cracks usually accompanies with tensile wing cracks. For the specimen containing double squares, tensile cracks are usually initiated from the top and bottom edge of two squares along the direction of axial stress, and in the process of final unstable failure, more vertical splitting failures are observed in the ligament region. When a single fissure and double squares are formed together into combined flaws, the crack coalescence between the fissure tips and double squares plays a significant role for ultimate failure of the specimen containing combined flaws.

• 한국해양공학회지
• /
• 제23권5호
• /
• pp.45-53
• /
• 2009

In this study, Finite Element Analysis (FEA) was used to decide three kinds of material property of vibration proof rubber with the unique characteristic of non-linear and large deformation. As well, three types of hardness (Hs 50, 55, 60) were compared with the result of fatigue tests, fatigue life was able to be predicted. The request for fatigue life becomes strict more and more as increasing stress under conditions like a compaction, high load and high temperature for parts because it is main characteristics of rubber mount for automotive. Regarding to the fatigue life under dynamic deformation condition, it can be predicted as checking forced deformation extends and its frequency and its strain-life curve. As for material property tests of uniaxial tension test, uniaxial compression test, pure shear test, Ogden model was used for FEA by observing relations between stress and strain's rate as curve fitting. As a result of FEA, fatigue life for rubber mount was predicted and accorded well with the experimental data of fatigue test with hourglass specimens. In addition, its property of the predictable fatigue life method suggested in this study was accorded well with the experimental data by comparing the predicted fatigue life of FEA with the result of fatigue test for rubber component of engine rubber mount.

• Composites Research
• /
• 제36권5호
• /
• pp.369-376
• /
• 2023

본 연구에서는 복합소재의 기지재로 활용되고 있는 에폭시 고분자의 가교율이 항복표면에 미치는 영향을 분자동역학 해석을 통해 평가하고자 한다. 분자동역학 해석을 활용하여 가교율에 따른 에폭시 모델을 형성한 후, 상온-대기압 조건하에서 단축 변형 해석 및 평면응력 조건을 고려한 다축 변형 해석을 수행하였으며, 해석 데이터를 통하여 가교율에 따른 영률, 항복점, 항복표면, 그리고 경화지수를 도출하였다. 해석 결과, 영률 및 응력은 기존 선행 연구들에서 조사되었듯이, 가교율에 따라 증가하는 경향을 확인하였다. 다축 변형 시에는, 이러한 가교율과 도출된 응력간의 관계가 하중의 방향에 따라 의존적임을 확인하였는데, 가교율이 증가할수록 단축 인장 영역에 비해, 이축 압축 영역의 항복표면은 빠른 속도 팽창하였으며, 이로 인한 항복표면의 상이함을 관측하였다. 이를 통해, 고분자 소재의 항복 표면의 압력의존성은 소재의 가교 정도에 의존적이며, 항복이 진행될수록, 압력의 존성은 동일 소재 하에서도 변할 수 있음을 확인하였다.

• Steel and Composite Structures
• /
• 제21권1호
• /
• pp.37-55
• /
• 2016

In this study, the influence of centrally placed circular and square cutouts on vibration and buckling characteristics of different ply-oriented laminated panels under the action of compressive and/or tensile types of non-uniform in-plane edge loads are investigated. The panels are inspected under the action of uniaxial compression, uniaxial tension and biaxial, compression-tension, loading configurations. Furthermore, the effects of different degrees of edge restraints and panel aspect ratios are also addressed in this work. Towards this, a nine-node heterosis plate element has been adopted which includes the effect of shear deformation and rotary inertia. According to the results, the tensile buckling loads are higher than that of compressive buckling loads. However, the tensile buckling load continuously reduces with the increased cutout sizes irrespective of ply-orientations. This is also true for compressive buckling loads except for some particular ply-orientations with higher sized cutouts.

• Steel and Composite Structures
• /
• 제13권5호
• /
• pp.423-436
• /
• 2012

In this study total of six buckling-restrained braces (BRBs) were manufactured using a square steel rod as a load-resisting core member and a hollow steel tube as restrainer to prevent global buckling of the core. The gap between the core and the tube was filled with steel rods as filler material. The performances of the proposed BRB from uniaxial and subassemblage tests were compared with those of the specimens filled with mortar. The test results showed that the performance of the BRB with discontinuous steel rods as filler material was not satisfactory, whereas the BRBs with continuous steel rods as filler material showed good performance when the external tubes were strong enough against buckling. It was observed that the buckling strength of the external tube of the BRBs filled with steel rods needs to be at least twice as high as that of the BRBs filled with mortar to ensure high cumulative plastic deformation of the BRB.

• Geomechanics and Engineering
• /
• 제12권4호
• /
• pp.627-637
• /
• 2017

The high positive correlation between plastic strain of loaded coal-rock and AE (acoustic emission) characteristic parameter was studied and proved through AE experiment during coal-rock uniaxial compression process. The results show that plastic strain in the whole process of uniaxial compression can be gained through the experiment. Moreover, coal-rock loaded process can be divided into four phases through analyzing the change of the plastic strain curve : pressure consolidation phase, apparent linear elastic phase, accelerated deformation phase, rupture and development phase, which corresponds to conventional elastic-plastic change law of loaded coal-rock. The theoretical curve of damage constitutive model is in high agreement with the experimental curve. So the damage evolution law of coal rock damage can be indicated by both acoustic emission and plastic strain. The results have great academic and realistic significance for further study of both AE signal characteristics during loaded coal-rock damaged process and the forecasting of coal-rock dynamic disasters.

• 한국기계가공학회지
• /
• 제3권1호
• /
• pp.52-58
• /
• 2004

The material used is a commercial magnesium based alloy AZ31(Mg-3Al-1Zn)sheet with a thickness of 1.0mm. Uniaxial tension tests at warm temperature were carried out to investigate the material characteristics of K, m, and n. A warm drawing process with a local heating and cooling technique was developed to improve formability in this study with results of uniaxial tension tests because it is very difficult for Mg alloy to deform at room temperature by the conventional method. The die and blank holder were heated up, while the punch was water-cooled during deformation. FE simulations considering heat transfer were executed with Mg alloy to investigate the Improvement of deep drawability. For the assessment of improvement those were compare with the results of no considering heat transfer and room temperature.

• Structural Engineering and Mechanics
• /
• 제7권1호
• /
• pp.35-52
• /
• 1999

Realistic steel-concrete bond/slip relationships proposed in the literature are usually uniaxial. They are based on phenomenological theories of deformation and degradation mechanisms, and various pull-out tests. These relationships are usually implemented using different analytical methods for solving the differential equations of bond along the anchored portion, for particular situations. This paper justifies the concepts, and points out the assumptions underlying the construction and use of uniaxial bond laws. A finite element implementation is proposed using 2-D membrane elements. An application example on an interior beam-column joint illustrates the possibilities of this approach.

• Computers and Concrete
• /
• 제1권4호
• /
• pp.433-455
• /
• 2004

The paper presents results of FE-calculations on shear localizations in quasi-brittle materials during both an uniaxial plane strain compression and uniaxial plane strain extension. An elasto-plastic model with a linear Drucker-Prager type criterion using isotropic hardening and softening and non-associated flow rule was used. A non-local extension was applied in a softening regime to capture realistically shear localization and to obtain a well-posed boundary value problem. A characteristic length was incorporated via a weighting function. Attention was focused on the effect of mesh size, mesh alignment, non-local parameter and imperfections on the thickness and inclination of shear localization. Different methods to calculate plastic strain rates were carefully discussed.