• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.179-180
• /
• 2006

Densification behavior of various metal and ceramic powder was investigated under cold compaction. The Cap model was proposed based on the parameters obtained from axial and radial deformation of sintered metal powder compacts under uniaxial compression and volumetric strain evolution. For ceramic powder, the parameters were obtained from deformation of green powder compacts under triaxial compression. The Cap model was implemented into a finite element program (ABAQUS) to compare with experimental data for densification behavior of various metal and ceramic powder under cold compaction.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.181-182
• /
• 2006

Cylindrical specimens with different levels of density have been submitted to uniaxial compression tests with loading and unloading cycles. The analysis of the elastic loadings shows a non linear elasticity which can be mathematically represented by means of a potential law. Results are explained by assuming that the total elastic strain is the contribution of two terms one deriving from the hertzian deformation of the contacts among particles and another that takes into account the linear elastic deformation of the powder skeleton. A simple model based in an one pore unit cell is presented to support the mathematical model.

• 지질공학
• /
• 제16권1호
• /
• pp.1-14
• /
• 2006

국내의 대표적 암종이라 할 수 있는 화강암체와 편마암체에 대해 탄성계수 측정 방법으로 자주 이용되고 있는 Goodman jack시험, PS검층, 초음파 속도측정, 일축압축 변형 시험을 실시하여 각 탄성계수를 측정하고 그 특징을 알아보았다. 실내에서 측정 된 동.정탄성계수는 측정시 가해진 응력의 크기, 측정시 이용된 주파수의 범위, 가압/감압 등의 측정 조건에 따라 상당히 다른 결과를 보였다. 실내 측정조건이 현장조건에 가까워질수록 현장암반의 탄성 계수와 비슷한 값으로 측정되는데 이는 실내시험시 현장 상태를 구현하는 것이 중요하다는 점을 시사한다. 동탄성계수는 정탄성계수에 비해 대체로 높게 측정되었으며 그 원인으로는 (미세)균열의 응력에 따른 거동양상, 측정시 이용한 주파수의 범위 차이, 그리고 변형 진폭의 차이 등의 효과로 설명 할 수 있다. 다양한 방법으로 측정된 각 탄성 계수 상호간의 관계 및 특징은 현장 암반 탄성계수의 적절한 판단을 위해 도움이 될 것으로 기대된다.

• 지질공학
• /
• 제26권4호
• /
• pp.593-600
• /
• 2016

본 연구에서는 국내의 107개 터널 설계 과정에서 수행한 현장 및 실내시험 자료 4,280개를 이용하여 암반 및 무결암의 역학적 특성을 암종 및 강도별로 분석하였다. 분석된 물리 및 역학적 특성은 단위중량, 점착력, 내부마찰각, 변형계수, 탄성계수, 포아송비, 일축압축강도, 인장강도, 투수계수, 비중이다. 평균값의 분석 결과에 의하면 편마암은 비중, 화강암은 투수계수, 퇴적암은 단위중량과 점착력, 내부마찰각, 화산암은 변형계수와 탄성계수, 일축압축강도, 인장강도, 변성암은 포아송비에서 가장 높은 값을 보인다. 역학적 특성의 분포 범위는 암종 및 강도를 고려한 분석에도 불구하고 넓게 분포하며, 이는 암반의 불균질성과 이방성에 기인하는 것으로 판단된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.43-48
• /
• 2000

In this study, a small punch creep(SP-Creep) test using miniaturized specimen$(10{\times}10{\times}0.5mm)$ has been described for the development of the newly semi-destructive creep test method for high temperature structural components such as headers and tubes of boiler turbine casino and rotor and reactor vessel. The SP-Creep testing technique has been applied to 2.25Cr-1Mo(STBA24) steel used widely as boiler tube material and the creep test temperature are varied at $550^{\circ}C{\sim}600^{\circ}C$. The overall deformations of SP-Creep curves are definitely depended with applied load and creep test temperature and show the creep behaviors of three steps like conventional uniaxial creep curves. The steady state creep rate${\delta}_{ss}$ of SP-Creep curve for miniaturized specimen increases with increasing creep temperature, but the exponential value with creep loading is decreased. The activation energy$(Q_{spc})$ during SP-Creep deformation with various test temperatures shows 605.7kJ/mol that is g.eater than 467.4kJ/mol reported in uniaxial creep test. This may be caused by the difference of stress states during creep deformation In two creep test. But from the experimental results, e.g. SP-Creep curve behaviors, the steady state creep rate${\delta}_{ss}$ with creep temperature, and the exponential value(n) with creep loading, it can be summarized that the SP-Creep test may be a useful test method to evaluate the creep properties of the heat resisting material.

• 터널과지하공간
• /
• 제19권2호
• /
• pp.158-166
• /
• 2009

Hoek-Brown 암석에서 응력에 의해 발생되는 균열의 전파특성을 수치해석적으로 분석하기 위한 기초연구로서 탄성균열의 균질화 기법이 제안되었다. 균열의 개시조건으로 Hoek-Brown 경험식이 이용되었고, 균열의 방향 탐색을 위해 임계면법이 이용되었다. 균열물질과 무결암으로 구성된 대표체적에 대해 체적평균 응력 및 변형률 개념을 적용하여 균열과 신선암의 역학적 특성을 균질화시킴으로써 등가 이방성매질의 구성관계식을 유도하였다. 제안된 균질화모델을 포트란 코드로 작성하여 상업유한요소 코드인 COSMOSM에 이식하였다. 제안된 수치해석모델의 적합성을 검증하기 위하여 2차원 평면변형률조건에서 수치 일축압축시험을 실시하였다. 모델 상하부 가압면의 구속조건을 달리한 2가지 해석모델을 선정하여 구속조건이 일축압축시험편의 변형 및 파단면 형성형태에 미치는 영향이 분석되었다. 균열의 균질화를 고려한 수치 일축압축시험 결과는 실제 실험에서 발생되는 형태와 유사한 변형거동 및 파단면 형성 특성을 잘 나타내었다.

• 한국지반공학회논문집
• /
• 제20권9호
• /
• pp.125-131
• /
• 2004

본 연구에서는 준설토와 시멘트, 기포를 이용하여 제작한 경량기포혼합토에 대한 일련의 일축압축시험으로 경량기포혼합토의 역학적 거동에 미치는 준설토의 초기 함수비 및 시멘트 함유율의 영향을 정량적으로 조사하였다 또한, 기존의 연구결과(윤과 김, 2004)와의 비교검토를 통해 광양항 중마지역의 준설토를 채취하여 지역에 따른 경량기포 혼합토의 역학적 특성의 차이를 분석하였다. 일축압축시험결과 경량기포 혼합토의 변형계수$(E_{50})$는 시멘트 함유량이 증가하면서 그 크기도 증가하나 준설토의 초기함수비가 클수록 작게 나타났다. 또한, 경량혼합토의 구성요소인 준설토의 초기 함수비, 시멘트 함유량, 기포 함유량을 고려한 정규화계수로 표현되는 일축압축강도의 적절한 회귀식을 제시하였다. 본 연구의 결과, 경량기포혼합토의 역학적 특성은 준설토의 채취지역에 따라 다르므로 설계반영을 위해서는 적절히 실내실험을 통하여 검토해야 할 필요성이 있음을 확인하였다.

• Steel and Composite Structures
• /
• 제46권4호
• /
• pp.471-483
• /
• 2023

This paper presents an analytical hyperbolic theory based on the refined shear deformation theory for mechanical stability analysis of the simply supported advanced composites plates (exponentially, sigmoidal and power-law graded) under triangular, trapezoidal and uniform uniaxial and biaxial loading. The developed model ensures the boundary condition of the zero transverse stresses at the top and bottom surfaces without using the correction factor as first order shear deformation theory. The mathematical formulation of displacement contains only four unknowns in which the transverse deflection is divided to shear and bending components. The current study includes the effect of the geometric imperfection of the material. The modeling of the micro-void presence in the structure is based on the both true and apparent density formulas in which the porosity will be dense in the mid-plane and zero in the upper and lower surfaces (free surface) according to a logarithmic function. The analytical solutions of the uniaxial and biaxial critical buckling load are determined by solving the differential equilibrium equations of the system with the help of the Navier's method. The correctness and the effectiveness of the proposed HyRPT is confirmed by comparing the results with those found in the open literature which shows the high performance of this model to predict the stability characteristics of the FG structures employed in various fields. Several parametric analyses are performed to extract the most influenced parameters on the mechanical stability of this type of advanced composites plates.

• 대한금속재료학회지
• /
• 제56권11호
• /
• pp.779-786
• /
• 2018

There have been previous attempts to observe the occurrence of dynamic ferritic transformation at temperatures even above $Ae_3$ in a low-carbon steel, and not only in steels, but recently also in titanium alloys. In this study, a new approach is proposed that involves treating true stress-true strain curves in uniaxial compression tests at various temperatures, and different strain rates in 0.1C-6Ni steel, which is a model alloy used to decelerate the kinetics of ferrite transformation from austenite. The initial flow stress up to peak stress was used to analyze the change in dynamic softening phenomena, such as dynamic recovery, dynamic recrystallization, and dynamic transformation. It is worth mentioning that for predicting the occurrence of dynamic transformation, flow stress before reaching peak stress is much more sensitive to the change in the dynamic softening rate due to dynamic transformation, compared to peak stress. It was found that the occurrence of dynamic ferritic transformation could be successfully obtained even at temperatures above $Ae_3$ once the deformation condition was satisfied. This deformation condition is a function of both the strain rate and the deformation temperature, which can be described as the Zener - Hollomon parameter. In addition, the driving force of dynamic ferritic transformation might be much less than that of the dynamic recrystallization of austenite at a given deformation condition. By applying this technique, it is possible to predict the occurrence of dynamic transformation more sensitively compared with the previous analysis method using peak stress during deformation.

• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.1933-1943
• /
• 2001

A micromechanical model is presented for superplasticity in which heterogeneous microstructures are coupled with deformation behavior. The effects of initial distributions of grain size, and their evolutions on the mechanical properties can be predicted by the model. Alternative stress rate models such as Jaumann rate and rotation incremental rate have been employed to analyze uniaxial loading and simple shear problems and the appropriate modeling was studied on the basis of hypoelasticity and elasto-viscoplasticity. The model has been implemented into finite element software so that full process simulation can be carried out. Tests have been conducted on Ti-6Al-4V alloy and the microstructural features such as grain size, distributions of grain size, and volume fraction of each phase were examined for the materials that were tested at different strain rates. The experimentally observed stress-strain behavior on a range of initial grain size distributions has been shown to be correctly predicted. In addition, the effect of volume fraction of the phases and concurrent grain growth were analyzed. The dependence of failure strain on strain rate has been explained in terms of the change in mechanism of grain growth that occurs with changing strain rate.