• 대한기계학회논문집B
• /
• 제33권3호
• /
• pp.201-206
• /
• 2009

The focus of this work is placed on the analysis of the mixture formation process under the evaporative diesel-free spray conditions. In order to examine homogeneity of mixture within the vapor phase region of the injected spray, image analysis was carried out based on the entropy of statistical thermodynamics. As an experimental parameter, the injection pressure and ambient gas density were selected, and effects of the injection pressure and density variation of ambient gas on the mixture formation process in the evaporative diesel spray were investigated. In the case of application of the thermodynamic entropy analysis to evaporative diesel spray, the value of the dimensionless entropy always increases with increase in time from injection start. Consequently, the dimensionless entropy in the case of the higher injection pressure is higher than that of lower injection pressure during initial injection period.

• 한국전자파학회논문지
• /
• 제19권5호
• /
• pp.556-561
• /
• 2008

시간 지연이나 위상 지연과 같은 레이다 기법을 기반으로 하는 마이크로파 reflectometry를 비균질 매질의 밀도 특성을 조사하기 위한 비파괴 검사 장치로 응용하기 위한 시스템 특성을 연구하였다. 특히 마이크로파 reflectometry를 플라즈마 연구 분야에 응용하기 시작한 것은 비교적 최근의 일로서 그 활용도가 점차 증가하고 있는데, 마이크로파 reflectometry로 비균질 매질을 조사하기 위해서는 대상에 따른 시스템의 하드웨어 구성이 최적화되어야 하며, 시스템에서의 신호 응답 특성이 이해되어야만 전체적인 시스템 해법을 제공하는 것이 된다. 마이크로파 reflectometry를 이용하여 진단하는 대상인 플라즈마의 특성에 따른 시스템의 구성을 설명하고, 파동수 및 밀도 섭동에 관한 시스템의 특성을 실험적으로 조사하기 위한 장치를 설명하였다. 마이크로파 reflectometry의 신호는 대부분의 전자기파 에너지가 반사되는 지역에서 기인하는 cutoff 신호와 교란 신호와의 상호 작용으로 발생하는 산란 신호로 구성된다. 이 논문에서는 마이크로파 reflectometry의 산란 신호 특성을 실험적 방법으로 조사한 결과를 제시하며, 1차원 파동방정식을 이용한 수치 해석적 결과와 비교 분석하였고, cutoff 신호 특성과도 비교하였다.

• 한국수소및신에너지학회논문집
• /
• 제23권5호
• /
• pp.513-520
• /
• 2012

The electrochemical reaction of refuse derived fuel (RDF) and refuse plastic/paper fuel (RPF) was investigated in the direct carbon fuel cell (DCFC) system. The open circuit voltage (OCV) of RPF was higher than RDF and other coals because of its thermal reactive characteristic under carbon dioxide. The thermal reactivity of fuels was investigated by thermogravimetric analysis method. and the reaction rate of RPF was higher than other fuels. The behavior of all sample's potential was analogous in the beginning region of electrochemical reactions due to similar functional groups on the surface of fuels analyzed by X-ray Photoelectron Spectroscopy experiments. The potential level of RDF and RPF decreased rapidly comparing to coals in the next of the electrochemical reaction because the surface area and pore volume investigated by nitrogen gas adsorption tests were smaller than coals. This characteristic signifies the contact surface between electrolyte and fuel is restricted. The potential of fuels was maintained to the high current density region over 40 $mA/cm^2$ by total carbon component. The maximum power density of RDF and RPF reached up to 45~70% comparing to coal. The obvious improvement of maximum power density by increasing operating temperature was observed in both refuse fuels.

• 대한의용생체공학회:의공학회지
• /
• 제14권3호
• /
• pp.209-220
• /
• 1993

Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, Immunomagnetic cell separation. To synthesize micro-spheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio or synthesized microspheres was always smatter than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6-13 times higher than thats of the ml crospheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin Is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption Isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin ) . The effect of the kind and the amount of surface functional group was also examined.p was also examined.

• 대한의용생체공학회:의공학회지
• /
• 제7권2호
• /
• pp.183-190
• /
• 1986

Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined.p was also examined.

• 한국수소및신에너지학회논문집
• /
• 제24권2호
• /
• pp.107-112
• /
• 2013

The ZnO is able to produce hydrogen from water however it can only absorb ultraviolet region due to its 3.37eV of wide band gap. Therefore efficiency of solar hydrogen production is low. In this work we report investigation results of improved visible light photo-catalytic properties of CdSe quantum dots(QDs) sensitized ZnO nanorod heterostructures. Hydrothermally vertically grown ZnO nanorod arrays on FTO glass were sensitized with CdSe by using SILAR(successive ionic layer adsorption and reaction) method. Morphology of grown ZnO and CdSe sensitized ZnO nanorods had been investigated by FE-SEM that shows length of $2.0{\mu}m$, diameter of 120~150nm nanorod respectively. Photocatalytic measurements revealed that heterostructured samples show improved photocurrent density under the visible light illumination. Improved visible light performance of the heterostructures is resulting from narrow band gap of the CdSe and its favorable conduction band positions relative to potentials of ZnO band and water redox reaction.

• 수산해양기술연구
• /
• 제52권1호
• /
• pp.65-71
• /
• 2016

Injection rate, injection quantity and injection timing of fuel are controlled precisely by electric control in CRDI system. Particularly, injection rate being influenced with injection pressure affects to spray characteristics and fuel-air ratio, so it is a very important factor in diesel combustion. In this study, injection rates in accordance with injection pressure at a constant ambient pressure were measured with Zeuch's method. Under the same condition, non-evaporating spray images were taken with a high speed camera and analyzed carefully with Adobe Photoshop CS3. Macroscopic spray characteristics and breakup processes in the spray could be found from the examined and analyzed data. Injection start time and injection period were practically affected with injection pressure. Also, initial injection rate, spray penetration, spray angle and breakup of high density droplets region in the spray were affected with injection pressure. The results and techniques of spray visualization and injection rate measurement in this study would be practically effective to study a high pressure diesel spray for common rail direct injection system.

• Journal of Advanced Marine Engineering and Technology
• /
• 제41권3호
• /
• pp.230-237
• /
• 2017

본 연구에서는 해상풍력 타워 지지구조물용 강재인 S355ML 강에 대하여 전기화학적 기법으로 전기방식 설계에 필요한 최적 방식전위를 규명하고자 하였다. 동전위분극 실험 결과, 양극분극 곡선 상에서는 부동태 구간은 존재하지 않으며, 음극분극 곡선 상에는 용존산소환원반응에 의한 농도분극 구간과 수소가스 발생에 의한 활성화분극 구간이 관찰되었다. 음극방식 시 방식전위에 해당하는 농도분극 구간은 약 - 0.72 V ~ - 1.0 V의 전위 구간인 것으로 확인되었다. 다양한 전위에서 정전위 실험을 실시한 결과 전류밀도 변화는 시간에 따라 안정화되는 경향을 나타냈다. 1200초 동안 정전위 실험 후 주사전자현미경과 3D 분석 현미경을 이용한 시험편 표면 분석 결과, 양극분극 전위에 해당하는 0 V ~ - 0.50 V의 전위구간에서는 양극용해반응에 의한 부식손상이 관찰되었다. 이에 반해 음극분극 전위 영역에서는 대체적으로 손상이 없는 양호한 표면을 유지하였으며 석회질 피막 형성을 확인할 수 있었다. 연구결과, 농도분극 영역에 해당하는 - 0.8 V ~ - 1.0 V의 전위영역이 S355ML 강의 외부전원법에 의한 음극방식 적용 시 최적 방식 전위 구간으로 사료된다.

• 한국가시화정보학회지
• /
• 제3권1호
• /
• pp.63-70
• /
• 2005

Optical Line Patternator(OLP) has been applied to get a distribution of the spray at high ambient pressure. OLP is a combined technique of extinction measurement and image processing. The attenuated intensity of laser beam after traversing spray region was measured by using a photo-detector, and the line image of Mie-scattering was captured simultaneously in the path of each laser beam by using a CCD camera. The distribution of extinction coefficient in the spray is obtained by processing these data with the algebraic reconstruction technique. From the distribution of extinction coefficient, the surface distribution of spray can be reconstructed. OLP does not use laser sheet but use laser beam so that the noise effect of multiple scattering, caused by increasing number density of droplet in high pressure environment, is reduced drastically. OLP is expected as a suitable method which can investigate the characteristics of relatively large spray under the high pressure environment such as liquid rocket engine.

• 한국해양공학회지
• /
• 제11권4호
• /
• pp.49-60
• /
• 1997

This paper deals with the effect of coating layer on the fatigue strength of TiN coated 1Cr-1Mo-0.25V steel prepared by using the arc ion plating (AIP) process, in which it was characterized by the presence of extractor grid (ion filter). The rotary bending fatigue tests were carried out under room air conditions, and the fatigue crack initiation and growth bwhavior were observed by using plastic replica method. As experimental results, it was found that the obvious improvement of fatigue life at lower stress region was confirmed in TiN coated specimen processed with ion filter. It was also exlained that the increase of fatigue life in the case of an improved AIP process with ion filter was attributed to the retardation of crack initiation of the substrate surface due to hard coating layer, more densly formed with the reduced size and density of droplets.