• 제목/요약/키워드: unconfined compression strength

검색결과 248건 처리시간 0.019초

낙동강유역 시멘트혼합토의 강도특성 (Strength Characteristics of Cemented Sand of Nak-dong River)

  • 김영수;정우섭;석태용;임안식
    • 한국지반환경공학회 논문집
    • /
    • 제7권4호
    • /
    • pp.43-52
    • /
    • 2006
  • 최근 이상기후 및 집중호우로 인해 낙동강유역의 많은 지역이 재산 및 인명손실을 크게 입고 있다. 이러한 재해 대책의 일환으로 본 연구에서는 일본에서 본댐공사시 가물막이댐으로서 많이 활용하고 있는 CSG공법의 제방축조재료로서 적용성을 평가하기 위해 낙동강 유역의 하상재료인 빈입도의 모래를 시멘트와 혼합한 시멘트혼합토의 강도특성을 파악하고자 한다. 이를 위하여 낙동강유역 2지점의 모래와 시멘트의 혼합율을 2~8%까지 변화시키면서 다짐 및 CBR시험, 일축압축시험 그리고 중형삼축시험을 실시하여 시멘트혼합율과 재령에 따른 압축강도, 탄성계수, 그리고 변형에 따른 응력의 특성등을 검토함으로서 제체재료의 적합성 검토, 설계 및 해석에 필요한 기초자료를 제공하고자 한다.

  • PDF

Cemented Sand and Gravel 재료의 강도특성 (Strength Characteristics of Cemented Sand and Gravel)

  • 김기영;박한규;전제성
    • 한국지반공학회논문집
    • /
    • 제21권10호
    • /
    • pp.61-71
    • /
    • 2005
  • Cemented Sand and Gravel(CSG)재료는 댐 수몰지로부터 쉽게 얻을 수 있는 하상자갈과 굴착토를 물, 시멘트와 함께 혼합한 재료를 총칭하는 것이다. 최근 일본에서는 가물막이댐과 본 댐 축조공사에 CSG 재료를 활용함으로써 댐 축조에 필요한 채석장 개발과 플랜트 건설에 투입되는 제반경비와 시공 공기를 줄일 수 있게 되었으며, 석산개발에 따른 환경훼손을 완화할 수 있게 됨으로써 경제성과 환경적 측면에서 그 활용성이 주목받고 있다. 본 연구에서는 CSG 재료의 기초적인 강도특성을 파악하기 위하여 단위시멘트량를 변화시켜 다짐시험, 일축압축시험 그리고 대형 삼축압축시험을 실시하고 단위 시멘트량과 재령에 따른 압축강도, 탄성계수 그리고 응력-변형특성 등을 검토하였으며 각 인자별 상관식을 제시함으로써 CSG 공법설계 및 해석에 필요한 기초적인 자료를 제공하고자 한다.

타이어 가루를 섞은 경량혼합토의 전단강도와 변형특성 (Shear Strength and Deformation Characteristics of Lightweight Soils Mixed with Tire Powder)

  • 윤길림;윤여원;안광현
    • 대한토목학회논문집
    • /
    • 제32권6C호
    • /
    • pp.259-265
    • /
    • 2012
  • 본 논문에서는 경량화 재료인 기포를 혼합한 기포혼합경량토와 폐타이어 분말을 혼합한 타이어혼합경량토를 연약지반의 개량, 진동차폐재 및 교대의 뒷채움재 등으로 활용하기 위하여 공학적 특성을 조사하였다. 당 연구에서는 목표 습윤단위중량과 시멘트 혼합비 변화에 따른 기포혼합경량토와 타이어혼합경량토의 강도특성과 변형특성을 일축압축시험과 비압밀-비배수 삼축압축시험으로 분석하였다. 동일한 습윤단위중량($13kN/m^3$)에서 2종류의 경량혼합토 강도특성을 비교한 결과, 일축압축시험에서는 같은 조건에서 비슷한 압축강도특성를 보였으나 비압밀-비배수 삼축압축시험 결과에서는 타이어 분말의 탄성특성으로 인한 영향으로 타이어혼합경량토가 기포혼합경량토 보다 큰 압축강도를 보였다. 그리고 2종류의 경량혼합토는 습윤단위중량과 시멘트량의 증가에 따라 일축압축강도와 삼축압축강도가 증가하였으나 습윤단위중량 $11kN/m^3$ 이하의 기포혼합경량토는 일정한 기포혼합비 수준에서는 시멘트량이 증가해도 기포에 의한 간극의 영향으로 경량혼합토의 강도는 증가하지 않거나 저하되는 것으로 나타났다.

Low strength concrete members externally confined with FRP sheets

  • Ilki, Alper;Kumbasar, Nahit;Koc, Volkan
    • Structural Engineering and Mechanics
    • /
    • 제18권2호
    • /
    • pp.167-194
    • /
    • 2004
  • In this paper axial loading tests on low strength concrete members, which were confined with various thickness of carbon fiber reinforced polymer (CFRP) composite sheets are described. Totally 46 specimens with circular, square and rectangular cross-sections with unconfined concrete compressive strengths between 6 and 10 MPa were included in the test program. During the tests, a photogrammetrical deformation measurement technique was also used, as well as conventional measurement techniques. The contribution of external confinement with CFRP composite sheets to the compressive behavior of the specimens with low strength concrete is evaluated quantitatively, in terms of strength, longitudinal and lateral deformability and energy dissipation. The effects of width/depth ratios and the corner radius of the specimens with rectangular cross-section on the axial behavior were also examined. It was seen that the effectiveness of the external confinement with CFRP composite sheets is much more pronounced, when the unconfined concrete compressive strength is relatively lower. It was also found that the available analytical expressions proposed for normal or high strength concrete confined by CFRP sheets could not predict the strength and deformability of CFRP confined low strength concrete accurately. New expressions are proposed for the compressive strength and the ultimate axial strain of CFRP confined low strength concrete.

지오폴리머계 그라우트재의 강도 특성 (Strength Characteristics of Geo-polymer Grout)

  • 이종휘;김선주;차경섭;김선곤;천병식
    • 한국지반환경공학회 논문집
    • /
    • 제13권4호
    • /
    • pp.53-59
    • /
    • 2012
  • 본 연구에서는 지오폴리머계 그라우트재(HIT)의 강도 및 내구성 특성을 분석하기 위하여 일축압축강도시험, SEM, 공시체 표면변화관찰 및 용탈시험을 실시하였다. 일축압축강도시험 결과, HIT의 경우 초기강도가 높고, 재령일이 경과할수록 강도가 증가하는 경향을 보였으나, SGR과 LW 경우 재령 28일 이후 강도가 감소하는 경향을 보였다. 이는 SEM 결과와 일치하였으며, HIT의 경우 지속적인 수화반응을 통하여 밀실한 형태의 C-S-H 수화물이 다수 분포함을 확인할 수 있어 물유리계 재료보다 강도 및 내구성이 우수한 칼슘실리케이트 수화물을 형성함을 알 수 있었다. 또한 공시체의 표면변화 및 용탈시험 결과에서도 양생 6개월이 지난 시점에서 HIT의 경우 양호한 표면을 유지했으며 중량감소율도 극히 미미했다. LW, SGR의 경우에는 표면의 수축정도가 심했으며, 중량감소율도 HIT보다 큰 것으로 나타나 내구성이 떨어지는 것으로 나타났다. 종합적으로 HIT가 물유리계 재료보다 강도, 내구성면에서 우수한 특성을 나타내는 것으로 나타나 해상구조물 그라우트재로 적합할 것으로 판단된다.

비닐하우스 기초 토양의 다짐률 변화에 따른 전단강도 특성 (Experimental Evaluation of Shear Strength of Surface Soil Beneath Greenhouse Varying Compaction Rate)

  • 임성윤;허기석;곽동엽
    • 한국농공학회논문집
    • /
    • 제63권6호
    • /
    • pp.17-26
    • /
    • 2021
  • Greenhouses have been damaged due to the uplift pressure from strong wind, for which rebar piles are often installed near the greenhouse to resist the pressure. For the effective design of rebar piles, it is necessary to access the shear strength of soil on which the greenhouse is constructed. This study experimentally evaluates the shear strength of the soil beneath the greenhouse. Four soil samples were collected from four agricultural sites, and prepared for testing with 75, 80, 85, and 90% compaction rates. One-dimensional unconfined compression test (UC), consolidated-undrained triaxial test (CU), and resonant column test (RC) were performed for the evaluation of shear strength and shear modulus. Generally, the higher shear strength and modulus were observed with the higher compaction rates. In particular, the UC shear strength increases with the increase of #200 sieve passing rate. Resulting from the CU test, the sample with the most of coarse soil had the highest friction angle, but the variation is small among samples. Resulting from the CU and RC tests, the ratio of maximum shear modulus with the major principle stress at failure was the higher at the finer soil. The ratio was two to three times greater than the ratio from the standard sand. This indicates that the shear strength is lower for the fine soil than the coarse soil at the same shear modulus. The results of this study will be a useful resource for the estimation of the pull-out strength of the rebar pile against the uplift pressure.

압축 벤토나이트 완충재의 역학 물성 평가 (Evaluation of Mechanical Properties for the Compacted Bentonite Buffer Materials)

  • 윤석;홍창호;김태현;김진섭
    • 한국지반공학회논문집
    • /
    • 제37권10호
    • /
    • pp.5-11
    • /
    • 2021
  • 압축 벤토나이트 완충재는 원자력발전소에서 발생하는 고준위폐기물을 처리하기 위한 공학적방벽시스템의 가장 중요한 요소 중 하나이다. 압축 벤토나이트 완충재는 외부 하중이나 지하수 침투로부터 처분 용기를 보호하기에, 열-수리-역학적인 요구 조건을 충족하여야 한다. 이러한 완충재의 열-수리 물성에 관한 연구는 많이 진행되어 왔지만, 역학 물성 규명에 관한 연구는 많이 부족한 실정이다. 이러한 이유로, 본 연구에서는 건조밀도와 함수비에 따른 다양한 국내 압축 벤토나이트 시료를 조성하여 이에 대한 일축압축강도시험을 실시하였으며, 일축압축강도, 탄성계수, 그리고 포아송비를 도출하였다. 압축 벤토나이트의 일축압축강도와 탄성계수는 건조밀도에 따라 증가하였으며, 포아송비는 건조밀도가 증가할수록 약간 감소하는 것으로 나타났다. 일축압축강도, 탄성계수 및 포아송비는 건조밀도와 큰 상관 관계를 보였으나, 함수비와는 특별한 상관성을 나타내지는 않았다.

Mechanical Properties of Cement Material for Energy-Foundation (EF) Structures

  • Park, Yong-Boo;Choi, Hang-Seok;Sohn, Jeong-Rak;Sim, Young-Jong;Lee, Chul-Ho
    • 토지주택연구
    • /
    • 제3권1호
    • /
    • pp.83-88
    • /
    • 2012
  • In this study, physical characteristics of cement and/or concrete materials that are typically used for energy-foundation (EF) structures have been studied. The thermal conductivity and structural integrity of the cement-based materials were examined, which are commonly encountered in backfilling a vertical ground heat exchangers, cast-in-place concrete piles and concrete lining in tunnel. For this purpose the thermal conductivity and unconfined compression strength of cement-based materials with various curing conditions were experimentally estimated and compared. Hydration heat generated from massive concrete in the cast-in-place concrete energy pile was observed for 4 weeks to estimate its dissipation time in the underground. The hydration heat may mask the in-situ thermal response test (TRT) result performed in the cast-in-place concrete energy pile. It is concluded that at least two weeks are needed to dissipate the hydration heat in this case. In addition, a series of numerical analysis was performed to compare the effect of thermal property of the concrete material on the cast-in-place pile.

Development of Landfill Material by Utilizing Waste Lime

  • Shin, Eun-Chul;Oh, Young-In
    • 한국지반공학회논문집
    • /
    • 제15권3호
    • /
    • pp.17-25
    • /
    • 1999
  • 인천 해안지역을 중심으로 송도 신도시 개발과 인천 국제공항 공사는 공유수면을 대규모로 매립하여 지반을 조성하고 있다. 현재까지 막대한 양의 준설토를 매립에 사용한 결과로 양질의 매립토 확보에 상당한 어려움을 겪고 있는 실정이다. 이러한 현실성을 고려하여 소다회를 생산하고 부산물로 발생되는 폐석회를 화강풍화토와 혼합하여 매립재로 활용할 수 있는 방법에 대하여 연구를 수행하였다. 환경 실험을 통하여 화학적 성분, pH, 중금속함량 등을 측정하여 환경적 영향에 대하여 검토를 수행하였다. 또한 혼합비에 따른 다짐시험, 일축압축강도시험, X-ray 회절분석시험 등을 수행하여 강도증가 및 매립재로서의 활용가능성을 검토하였다. 상기의 연구결과 폐석회를 화강풍화토에 무게중량으로 20%를 혼합하면 양호한 매립재로 활용이 가능하며, 환경적 영향도 국내 관련기준법을 만족함을 알 수 있다.

  • PDF

주입재료에 따른 Anchor Bar의 인발저항 특성 (Pull-out Resistance Characteristics of the Anchor Bar According to the Grouting Material)

  • 여규권;송영석
    • 지질공학
    • /
    • 제18권2호
    • /
    • pp.227-232
    • /
    • 2008
  • 본 연구에서는 급경사면에 설치되는 여수로를 지탱하기 위한 Anchor bar의 인발저항 특성을 현장실험을 통하여 조사하였다. Anchor bar의 주입재료로 시멘트 모르타르와 시멘트 밀크를 사용하였으며, 조건별 주입재료의 일축압축강도를 측정하였다 측정결과 시멘트 모르타르와 시멘트 밀크는 물시멘트비가 증가함에 따라 일축압축강도가 감소하며, 재령일이 증가함에 따라 일축압축강도가 증가한다. 한편, 동일한 물시멘트비와 재령일을 가질 경우 시멘트 밀크의 일축압축강도가 시멘트 모르타르의 압축강도보다 더 큼을 알 수 있다. 현장에서 Anchor bar의 인발시험시 편심이 작용되지 않도록 하기 위하여 너트형태의 철근 고정커플링을 Anchor bar에 삽입하여 설치장비를 개선시켜 시험을 실시하였다. Anchor bar의 인발시험결과 시멘트 밀크의 경우 강도발현은 재령초기에 크게 발생되는 반면 시멘트 모르타르의 경우 재령일자가 지남에 따라 강도발현이 증가하였다. 따라서 Anchor bar의 신속한 시공을 위해서는 강도발현이 재령초기에 크게 발생되는 시멘트 밀크를 주입재료로 사용하는 것이 바람직하다.