• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.280-285
• /
• 2000

It is very important to evaluate the surface or subsurface microstructure because of their influences on mechanical properties of materials. Surface SH-wave which is horizontally polarized shear wave traveling along near surface and subsurface layer is an attractive technique for material evaluation. The destructive method is widely used for the estimation of material degradation but it has a great difficulty in preparing specimens from in-service industrial facilities. In this study, nondestructive evaluation for degraded structural materials used at high temperature though surface SH-wave method is discussed. 2.25Cr-1Mo steel specimens which were prepared by the isothermal aging heat treatment at $650^{\circ}$ were evaluated though ultrasonic nondestructive evaluation techniques investigating the change of sound velocity, attenuation coefficient and amplitude spectra. In addition, it has verified experimentally the frequency-dependence of attenuation coefficient though wavelet analysis method.

• 열처리공학회지
• /
• 제12권2호
• /
• pp.157-165
• /
• 1999

Grain size of steels is one of the most important parameters which influence yield strength and fracture toughness. Ultrasonic wave propagating in polycrystalline materials is mostly attenuated by scattering at grain boundary. Effect of ultrasonic attenuation on average ferrite grain size of carbon steels with tensile strength $40{\sim}60kgf/mm^2$ consisting of multi phases such as ferrite + pearlite and ferrite + pearlite + bainite was evaluated. The attenuation of these steels rapidly increased with average ferrite grain diameter. Average ferrite grain diameter ($D_{av}$, ${\mu}m$) could be expressed as $1.79+22.97*a^{1/2.03}$, where a is attenuation with unit of nepers/cm. From this study, it was confirmed that nondestructive ultrasonic method could be used in measuring average ferrite grain size indirectly.

• 한국식품영양학회지
• /
• 제34권2호
• /
• pp.174-180
• /
• 2021

The purpose of this study was to determine the optimum extraction method suitable for the availability of biological activities in unripe apples known to be rich in functional components. Unripe apples 'Hongro' picked on May 28th, 2019 were extracted by various extraction methods (hot water, ethanol, enzymatic pre-treatment, ultrasonic wave, and subcritical water) and their extracts were investigated yield, effective component contents, and antioxidant activities. Overall, the yields by the extraction solvent were higher in water than in organic solvent(ethanol) because water-soluble compounds were eluted from a polar solvent. Total phenol contents of the ultrasonic wave (ethanol) extracts were significantly higher in 6 times than hot water extract. Contents of flavonoid were highest in the ethanol extract at 29.14 mg QE/g. Contents of tannin and ursolic acid were also significantly higher in the ultrasonic wave (ethanol) extract. The DPPH radical and ABTS radical scavenging activities were the strongest in the ultrasonic wave (ethanol) extract. Correlation between effective components and antioxidant activities was high in the total phenol content with ABTS and the ursolic acid content with DPPH (p<0.01). The above results suggested that ultrasonic wave (ethanol) extract of unripe apples has the potential to act as a functional material.

• 대한환경공학회지
• /
• 제28권12호
• /
• pp.1310-1315
• /
• 2006

본 연구에서는 초음파를 이용한 조류의 제거 및 저감에 대한 연구를 진행하였다. 본 실험은 주파수별(28 kHz의 단주파와 40 kHz의 다주파), 출력별(10, 15, 20, 25, 30 W/L), 조류 개체수별(500, 1000, 1700/mL)로 변화시켜가며, 노출시간 1, 3, 5, 7, 10, 15, 20분에 따라 진행하였다. 또한, 초음파 발진기로부터 직접 초음파에 노출시키는 단일 수조와 초음파 발진기로부터 이격거리 4 cm를 두고 초음파에 노출시키는 2중 수조에 대한 실험도 진행하였다. 본 연구에서 사용된 조류의 종은 규조류(Bacillariophceae)중 Melosira 속이다. 규조류는 염소 등에 의한 산화제 처리 시 염소에 대한 저항성이 있어 조류가 살균처리 후 여과지까지 유입되어 여과지 폐색을 유발하는 대표적인 조류이다. 본 연구결과, 초음파 노출 후의 규조류는 산화제에 의한 살균처리와 달리 형태가 완전히 파괴되어 분해되었으며, 초음파의 출력과 노출시간에 비례하여 조류제거효율이 증가하였다. 또한, 2중 수조에서 더 좋은 조류제거효율을 나타냈다.

• Restorative Dentistry and Endodontics
• /
• 제47권1호
• /
• pp.11.1-11.11
• /
• 2022

This study aimed to describe the outcomes of the GentleWave system (GW) (Sonendo) on root canal treatment. Published articles were collected from scientific databases (MEDLINE/PubMed platform, Web of Science, Scopus, Science Direct and Embase). A total of 24 studies were collected from August/2014 to July/2021, 20 in vitro and 4 clinical. GW System was not associated with extrusion of the irrigant, promoted faster organic dissolution than conventional syringe irrigation (CSI), passive ultrasonic irrigation (PUI) continuous ultrasonic irrigation (CUI) and EndoVac, reduced more bacterial DNA and biofilm than PUI and CUI, promoted higher penetration of sodium hypochlorite into dentinal tubules than PUI and CUI in vitro, and removed more intracanal medication than CSI and PUI. GW was able to remove pulp tissue and calcifications. Moreover, its ability to remove hard-tissue debris and smear layer was better than that of CSI, and its ability to remove root canal obturation residues was lower or similar to that of PUI, and similar to that of CSI and EndoVac. Regarding root canal obturation of minimally instrumented molar canals, GW was associated with high-quality obturation. Clinically, the success rate of endodontic treatment using GW was 97.3%, and the short-term postoperative pain in the GW group was not different from CSI. Further research, mainly clinical, is needed to establish whether GW has any advantages over other available irrigation methods.

• 한국주조공학회지
• /
• 제9권3호
• /
• pp.228-236
• /
• 1989

The relationships between nodularity, tensile property and ultrasonic velocity were studied in ductile iron castings having similar matrix structure. Also, the effects of heat treatment and the number of graphite nodules on the ultrasonic velocity were investigated. The results were as follows 1. The ultrasonic velocity increased proportionally with increassing nodularity and tensile strength. 2. The ultrasonic velocity in annealed and normalized state decreased average 1.7% and 3.4% respectively than that in as cast state. 3. The ultrasonic velocity increased with increasing the number of graphite nodules. Therefore, ductile iron castings can be evaluated in the only case of castings having the same manufacturing history by ultrasonic velocity.

• 펄프종이기술
• /
• 제40권2호
• /
• pp.16-22
• /
• 2008

The pilot scale ultrasonic deinking was carried out in order to confirm the commercialization possibility of ultrasonic deinking. White ledger was used as a raw material and the results were compared to the results obtained from the conventional deinking. The fraction of smaller ink particle was increased and the improved ink removal efficiency was also obtained by the ultrasonic treatment. The brightness and breaking length of ultrasonic deinked pulp were superior to those of the conventional deinked pulp. Most interesting findings in this study were that the significant improvement in effluent quality and the reduction of chemicals and energy cost were obtained by the ultrasonic deinking.

• Journal of the Korean Wood Science and Technology
• /
• 제33권3호통권131호
• /
• pp.64-71
• /
• 2005

본 실험에서는 초음파의 특성을 이용하여 목재를 방부처리하고 그 주입효과에 대해 검토하고자 하였다. 유용성 방부제인 NCU (나프텐산 구리)와 수용성 방부제 AAC (알킬암모늄 화합물)에 소나무 및 잣나무 시편을 침지한 후 40 kHz, 400 W 출력의 초음파를 발진시켰다. 초음파처리 이후 시편의 흡수율 및 침윤도는 시간 경과에 따라 지속적으로 증가하여 120시간 경과 후 AAC처리 잣나무, 소나무 모두에 대해 약 95%의 흡수율을 얻을 수 있었으며, 소나무 및 잣나무 각 시편 두께의 95, 83%에 해당하는 NCU의 침윤도를 얻을 수 있었다. 초음파 처리후의 시편을 SEM을 이용해 관찰하였으며, 초음파 발생에 의해 생성된 고온, 고압의 충격파가 목재 내 약액의 주입통로가 되는 벽공구를 파괴하고 초음파의 탈포작용과 목재내 추출물의 배출 등에 기인하여 약액의 주입성능이 향상된 것으로 판단된다. 초음파 처리에 의한 방부제의 주입은 가압방부처리의 적용이 어려운 소재, 단판 등에 적용이 가능할 것으로 판단된다.

• 대한기계학회논문집A
• /
• 제34권6호
• /
• pp.751-756
• /
• 2010

비선형 초음파는 선형 초음파와 비교하였을 때 재료의 물성 변화에 민감하게 반응한다. 이 연구의 목표는 비선형 요소를 포함하여 열처리 조건과 초음파 비선형성의 상관관계를 알아내는 것이다. 본 연구에서 기존의 방법과는 다른 수정된 초음파속도계산 식이 새롭게 제안되었다. 이것은 열처리된 재질에서 초음파 속도변화가 재료의 비선형성 때문에 발생하는 것을 찾아내었다. 실험을 통하여 수정된 초음파 속도와 1차 조화 및 2차 조화파의 진폭 비율이 서로 동일한 경향을 보이는 것을 알아냈다. 그리고 수정된 초음파속도식을 통해 계산된 상대적인 비선형계수는 기존의 방법을 이용하였을 때보다 더 민감함을 알아냈다.

• 한국자원식물학회지
• /
• 제22권5호
• /
• pp.381-388
• /
• 2009

참취, 좀개미취, 큰금계국, 기생초 꽃 추출물의 항산화효과를 증가시킬 수 있는 적정 추출방법을 개발하기 위하여 환류냉각추출한 추출물과 15, 30, 45분 동안 초음파 추출한 추출물의 항산화 활성을 비교하였다. 추출수율은 모두 초음파 추출물에서 높게 나타났다. 종에 따라 적정 추출시간은 다르게 나타났으나, 4종 모두 초음파추출물이 환류 냉각추출물 보다 DPPH와 ABTS radical 소거능 및 Ferrousion chelating 활성이 우수하거나 유사하였다. 총 폴리페놀 및 플라보노이드의 함량 또한 대체로 초음파추출물에서 높게 나타났으며, 4종 모두 추출시간이 길어질수록 항산화물질 함량도 증가되는 경향을 보였다. 참취와 큰금계국 꽃 추출물의 지질과산화 억제활성을 비교한 결과, 참취 꽃은 환류냉각추출물, 큰금계국 꽃은 초음파 15분 처리구에서 지질과산화 억제활성이 우수하였다. 연구의 결과, 식물 종 및 목표로 하는 항산화 효과에 따라 추출시간에 차이는 있으나, 초음파추출이 환류냉각추출보다 추출시간이 짧고 항산화 효과를 증가시킬 수 있는 효과적인 추출방법임을 확인할 수 있었다.