모의 낙뢰시험에 의해 충격손상을 입은 탄소섬유강화플라스틱(CFRP) 복합재료의 잔류압축강도를 평가하는 시험(CAI) 중 손상부의 거동을 음향방출(AE)법으로 관찰하였다. CFRP 시편은 ITO 나노입자를 탄소섬유에 직접 코팅한 CFRP prepreg를 이용하여 만들었고, 모의 낙뢰시험은 고전압 대전류 인가장치(ICG)를 이용하여 시편에 10~40 kA의 충격파 전류를 인가하여 실시하였다. ITO 나노입자 코팅의 효과와 인가전류의 세기에 따른 손상영역의 크기와 잔류압축강도를 AE 거동과 연관하여 평가하였다. 손상영역의 크기는 초음파 C-scan 영상을 이용하여 측정하였으며, AE events 수와 AE event가 발생하기 시작할 때의 압축응력 수준을 연관시킨 결과 ITO 나노입자 코팅 CFRP의 경우 상대적으로 손상이 작고 훨씬 높은 용력수준에서 AE가 발생하기 시작하였다. CAI시험 중 AE측정은 실제로 낙뢰손상을 입은 복합재 동체 구조물의 손상된 정도를 구별하는 데 유용한 지표로 활용될 수 있음을 확인하였다.
본 연구의 목적은 록볼트의 건전도를 평가하기 위하여 록볼트의 비파피시험을 기술하고 바파괴시험의 적용성을 조사하는 것이다. 록볼트 자체와 그라우팅제를 포함한 록볼트의 건전도를 평가하기 위하여, 수치해석 및 실험적 방법을 이용한 두가지 방법이 적용되었다. 수치해석 방법에서는 분석은 DISPERSE 프로그램을 이용하여 록볼트의 분산선도를 해석하였다. 분산선도 곡선은 지중근입되어 있는 록볼트에 대한 그라우팅제의 두께와 강성에 대한 영향을 보여준다. 이로 부터 록볼트의 건전도 시험을 위한 최적의 주파수를 추정할 수 있으며, 그 결과 L(1, 0) 모드에서 20~120kHz가 최적의 주파수로 산정되었다. 실험적 방법에서는 실험실에서 사료를 제작하여 파괴 및 비파괴시험을 실시하였다. 비파괴 실험에서는 타격을 이용한 저주파수 모드와 초음파 트랜스듀서를 이용한 고주파수 모드를 통하여 록볼트의 상태를 조사할 수 있다. 실험실에서 수행된 비파괴실험으로부터, 유도파는 주변의 그라우팅제의 강도가 증가하거나 (또는 증가하고) 결함부 영역이 증가할 때 감쇠가 커짐을 알 수 있었다. 그리고 인발시험으로부터 록볼트의 극한지지력을 추정하였다. 본 연구는 록볼트의 건전도 평가에 비파괴시험이 매우 유용한 방법임을 보여준다.
벌레 모양 흑연철로 알려진 강화흑연강(CGI)은 주철보다 더 강하고 더 가벼운 것이 요구되는 응용제품에서 인기를 얻고 있는 금속이다. 최근 강화흑연강 디젤엔진 블록에 사용되고 있다. 본 연구에서는 디젤엔진의 배기 매니폴드에 사용되는 것을 고려하여, 873~1273 K에서 1~96 시간 열처리를 실시하여 CGI340의 기계적 특성을 평가하였다. 열처리를 실시한 시험편의 인장강도는 모재에 비하여 전체적으로 낮은 인장강도를 나타내었다. 열처리 시간이 증가할수록 인장강도가 감소하였으며, 열처리 온도가 높고 시간이 길어질수록 더 많이 감소하였다. 초음파 피로시험에 의한 피로한도는 모재는 약 130 MPa, 1173 K(96 hrs) 시험편은 약 100 MPa을 나타내었다. 경도는 열처리 시간이 증가할수록 감소하였으며, 열처리 온도가 높을수록 경도의 분포가 낮아졌다. 그리고 CGI340에 분포하는 구상흑연의 평균경도는 120 Hv, 벌레 모양 흑연의 평균경도는 114 Hv로 기지조직인 페라이트보다 낮은 경도를 나타내었다. 열처리 온도 및 시간에 따라서 구상흑연 및 벌레 모양 흑연에 대한 변화는 일정하지 않지만, 열처리 시간이 길어짐에 따라 기지조직의 결정립이 커지는 것을 확인하였다.
EMAT(electromagnetic-acoustic transducer)는 비접촉식 초음파 탐촉자이므로 초음파의 송수신을 위하여 접촉매질이 필요하지 않기 때문에 탐촉자를 시험 대상체의 표면을 따라 움직이면서 결함 검출이 가능하며, 코일의 설계와 배열에 따라 표면파와 판파 등 원하는 모드의 유도초음파를 손쉽게 송수신할 수 있기 때문에 두께가 얇은 배관의 탐상에 알맞는 초음파 탐촉자이다. 본 논문에서는 표면초음파 발생을 위한 EMAT와 $A_1$ 모드의 판파, $S_1$ 모드의 판파를 선택적으로 발생시키기 위한 EMAT를 설계 제작하였다. 1.5MHz의 표면초음파는 분산이 없어서 신호 왜곡 없이 높은 신호 대 잡음비로 배관을 진햄함을 보였다. 반면에 800kHz의 $S_1$ 모드의 판파와 940 KHz의 A1 모드의 판파는 분산 특성이 있어서 배관을 따라 진행하면서 신호 왜곡이 생김을 확인할 수 있었으며, EMAT에 공급하는 펄스의 폭을 넓히면 판파의 모드 선택성이 향상되었다. 내경 256mm, 두께 5.5mm인 강관에 가공된 인공결함에 대한 각 모드의 결함 검출능을 서로 비교하였다.
원자력발전소 운전에 따른 경년열화 등에 의하여 원자력발전소 주요 기기 및 재료 등에 손상 발생 가능성이 있어 원자력법 및 관련 기술기준에서는 비파괴검사 방법을 이용하여 원자력발전소 주요 기기 및 배관의 용접부 등 취약 부위에 대한 건전성을 주기적으로 평가토록하고 있다. 이에 따라, 영광 6호기 가동중검사는 기기, 배관 및 구조물 비파괴검사, 압력용기 자동 초음파탐상검사, 원자로 내부 구조물 육안검사 및 증기발생기 전열관 와전류탐상검사로 구분하여 수행하였다. 원자력발전소 계통의 주요기기에 대한 비파괴검사 결과, 기기, 배관 및 구조물과 원자로 압력용기 용접부에 대해서는 특이 사항 발생 없이 적용 규격에 만족되고 건전한 것으로 최종 평가되었다. 특히, 배관 용접부에 대한 초음파탐상검사는 영광 5호기에서와 마찬가지로 ASME Code Sec. XI 1995년도 판에 따라 기량검증(Performance Demonstration : PD) 방법을 적용함으로써 검사 신뢰도를 확보하였다는데 큰 의미가 있다.
본 논문에서는, 두 나이군의 인체 요골동맥과 경동맥에서 초음파 혈액 영상을 측정하여 혈액에코박동지수를 분석했고, 또한 뇌졸중 환자와 대조군의 요골동맥과 경동맥에서 초음파 혈액 영상을 측정하여 혈액에코박동지수를 비교했다. 요골동맥의 혈액에코박동지수는 젊은 세대와 나이 많은 세대가 각각 $0.13{\pm}0.11$, $0.16{\pm}0.03$로 유사한 반면, 경동맥에서는 각각 $0.70{\pm}0.21$, $0.32{\pm}0.01$로 젊은 세대에서 더 높게 나타났고, 피험자 별로 더 높은 분산을 보였다. 뇌졸중 환자와 대조군의 혈액에코박동지수는 요골동맥($0.22{\pm}0.02$, $0.16{\pm}0.03$)과 경동맥($0.35{\pm}0.02$, $0.32{\pm}0.01$) 모두 환자군에서 더 높게 나타났다. 이와 유사하게, 섬유소원 농도 역시 요골동맥과 경동맥 모두 대조군($264{\pm}38$, $257{\pm}43mg/dl$)보다 환자군($336{\pm}61$, $340{\pm}126mg/dl$)에서 더 높게 나타났다. 본 연구의 결과는 향후 적혈구 응집과 뇌졸중의 상관성에 대한 초음파 연구의 가능성을 제시하고 있으며, 적혈구 응집의 생체 내 측정은 임상학적으로 유용하게 활용될 수 있을 것으로 기대된다.
We performed this study to understand the effect of a single-crystalline anode on the mechanical properties of as-deposited films during electrochemical deposition. We used a (111) single- crystalline Cu plate as an anode, and Si substrates with Cr/Au conductive seed layers were prepared for the cathode. Electrodeposition was performed with a standard 3-electrode system in copper sulfate electrolyte. Interestingly, the grain boundaries of the as-deposited Cu thin films using single-crystalline Cu anode were not distinct; this is in contrast to the easily recognizable grain boundaries of the Cu thin films that were formed using a poly-crystalline Cu anode. Tensile testing was performed to obtain the mechanical properties of the Cu thin films. Ultimate tensile strength and elongation to failure of the Cu thin films fabricated using the (111) single-crystalline Cu anode were found to have increased by approximately 52 % and 37 %, respectively, compared with those values of the Cu thin films fabricated using apoly-crystalline Cu anode. We applied ultrasonic irradiation during electrodeposition to disturb the uniform stream; we then observed no single-crystalline anode effect. Consequently, it is presumed that the single-crystalline Cu anode can induce a directional/uniform stream of ions in the electrolyte that can create films with smeared grain boundaries, which boundaries strongly affect the mechanical properties of the electrodeposited Cu films.
Purpose: The finite element method (FEM) is advantageous because it can save time and cost by reducing the number of samples and experiments in the effort to identify design factors. In computational problem-solving it is necessary that the exact material properties are input for achieving a reliable analysis. However, in the case of fiber boards, it is difficult to measure their cross-directional material properties because of their small thickness. In previous research studies, the Poisson's ratio was measured by analyzing ultrasonic wave velocities. Recently, the Poisson's ratio was measured using a high-speed digital camera. In this study, we measured the transverse strain of a fiber board and calculated its Poisson's ratio using a high-speed digital camera in order to apply these estimates to a FEM analysis of a fiber board, a corrugated board, and a corrugated box. Methods: Three different fiber board samples were used in a uniaxial tensile test. The longitudinal strain was measured using the Universal Testing Machine. The transverse strain was measured using an image processing method. To calculate the transverse strain, we acquired images of the fiber board before the test onset and before the fracture occurred. Acquired images were processed using the image processing program MATLAB. After the images were converted from color to binary, we calculated the width of the fiber board. Results: The calculated Poisson's ratio ranged between 0.2968-0.4425 (Machine direction, MD) and 0.1619-0.1751 (Cross machine direction, CD). Conclusions: This study demonstrates that measurement of the transverse properties of a fiber board is possible using image processing methods. Correspondingly, these processing methods could be used to measure material properties that are difficult to measure using conventional measuring methodologies that employ strain gauge extensometers.
Gucunski, Nenad;Kee, Seong-Hoon;La, Hung;Basily, Basily;Maher, Ali
Structural Monitoring and Maintenance
/
제2권1호
/
pp.19-34
/
2015
One of the main causes of a limited use of nondestructive evaluation (NDE) technologies in bridge deck assessment is the speed of data collection and analysis. The paper describes development and implementation of the RABIT (Robotics Assisted Bridge Inspection Tool) for data collection using multiple NDE technologies. The system is designed to characterize three most common deterioration types in concrete bridge decks: rebar corrosion, delamination, and concrete degradation. It implements four NDE technologies: electrical resistivity (ER), impact echo (IE), ground-penetrating radar (GPR), and ultrasonic surface waves (USW) method. The technologies are used in a complementary way to enhance the interpretation. In addition, the system utilizes advanced vision to complement traditional visual inspection. Finally, the RABIT collects data at a significantly higher speed than it is done using traditional NDE equipment. The robotic system is complemented by an advanced data interpretation. The associated platform for the enhanced interpretation of condition assessment in concrete bridge decks utilizes data integration, fusion, and deterioration and defect visualization. This paper concentrates on the validation and field implementation of two NDE technologies. The first one is IE used in the delamination detection and characterization, while the second one is the USW method used in the assessment of concrete quality. The validation of performance of the two methods was conducted on a 9 m long and 3.6 m wide fabricated bridge structure with numerous artificial defects embedded in the deck.
PURPOSE. The objective of this study was to investigate the effect of surface treatments on microtensile bond strengths (MTBSs) of two types of indirect resin composites bonded to a conventional direct resin composite. MATERIALS AND METHODS. Indirect resin composite blocks of Ceramage and SR Nexco were prepared in a plastic mold having a dimension of $10{\times}10{\times}4\;mm$. These composite blocks were divided into three groups according to their surface treatments: Group1: Sandblast (SB); Group2: Sandblast and ultrasonically clean (SB+UL); Group3: Sandblast plus silane (SB+SI). After bonding with direct resin composite, indirect-direct resin composite blocks were kept in distilled water for 24 hours at $37^{\circ}C$ and cut into microbars with the dimension of $1{\times}1{\times}8\;mm$. Microbar specimens (n = 40 per group) were loaded using a universal testing machine. Failure modes and compositions were evaluated by SEM. The statistical analyses of MTBS were performed by two-way ANOVA and Dunnett's test at ${\alpha}=.05$. RESULTS. Surface treatments and brands had effects on the MTBS without an interaction between these two factors. For SR Nexco, the MTBSs of SB and SB+SI group were significantly higher than that of SB+UL. For Ceramage, the MTBSs of SB and SB+SI were significantly higher than that of SB+UL. The mean MTBS of the Ceramage specimens was significantly higher than that of SR Nexco for all surface treatments. CONCLUSION. Sandblasting with or without silane application could improve the bond strengths of repaired indirect resin composites to a conventional direct resin composite.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.