• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.119-124
• /
• 1993

This paper describes a method of producing maps of an indoor environment with an autonomous mobile robot equipped with sonar array. This method uses the certainty grid suitable for accommodation of inaccurate sensor data and real-time navigation. Each grid contains a certainty vale that indicates the measure of confidence that an obstacle exists within th grid area. The scheduled firing method is used to eliminate the crosstalk between ultrasonic sensors. The effectiveness of the method is verified by a series of experiments.

• 전자공학회논문지B
• /
• 제32B권6호
• /
• pp.840-848
• /
• 1995

A new tri-aural ultrasonic sensor system is suggested to build more accurate world maps for mobile robots with less scanning. In ordinary single sensor systems, the inherent beam-width of sonar transmitter causes ambiguity in sensing direction. Dual sensors may be used to discriminate plane and corner with several scans. However, the proposed method uses triple sensors, and achieves more accuracy with less scanning.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.134.5-134
• /
• 2001

The capability of environment recognition is very important for mobile robot. Especially, a function of target tracking is necessary in monitoring and watching an object using mobile robot. In general, vision sensors such as CCD camera and laser range finder were used for tracking of a moving target. However, they are not only affected by intensity of illumination in environment but also require high performance processors to process large amount of data. Therefore, in this paper, we propose the construction of target tracking system for mobile robot using only ultrasonic sensors to cope with these problems.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.34.6-34
• /
• 2002

1. Introduction 2. System Configuration 2.1 Control System 2.1.1 Longitudinal control 2.1.2 Lateral control 2.2 Sensor System 2.2.1 Photo interrupt 2.2.2 Ultrasonic sensor 2.3 Vision system 2.4 Communication system 2.4.1 Data communication 2.4.2 Image Communication 3. Test and Result 3.1 Vision test 3.2 Ultrasonic sensor test 4. Conculsion. Acknowledgment References.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.108.2-108
• /
• 2002

$\textbullet$ Introduction $\textbullet$ Physical model of beam pattern $\textbullet$ Background of ultrasonic sensor sensing $\textbullet$ System unit $\textbullet$ Experimental results $\textbullet$ Conclusion $\textbullet$ References

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.383-386
• /
• 1986

In this paper, ultrasonic range finding module for the self-contained robot, INHAE-1, is presented. This system is processed, using Z-80 microprocessor, a much of information on the surrounding condition in real time and is realted a sensor for many side data acqusition with a stepping motor. Also this system can obtain the more correct edge of the obstacle using the standard deviation of the least-square method. In this experiment, it gives more correct information to mobile robot of the blind guidance and improves the orientation of the robot path.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제7권4호
• /
• pp.228-235
• /
• 2007

The main purpose of this paper is to manage the container property effectively at the container yard by applying the RTLS technology to the field of port logistics. Yet, many kinds of noises happen to be inputted with the distance value(between the reader and the tag) which is to be inputted into the location identification algorithm, which makes the distance value jumped due to the system noise of the ultrasonic sensor module and the measurement noise. The Kalman Filter is widely used to prevent this jump occurrence; the noises are eliminated by using the EKF(Extended Kalman Filter) while considering that the distance information of the ultrasonic sensor is non-linear. Also, the 3D RTLS system at the port container yard suggested in this research is designed not to be interrupted for its ultrasonic transmission by positioning the antenna at the front of each sector of the container where the active tags are installed. We positioned the readers, which function as antennas for location identification, to four places randomly in the absolute coordinate and let the positions of the active tags identified by using the distance data delivered from the active tags. For the location identification algorithm used in this paper, the triangulation measurement that is most used in general is applied and newly reorganized to calculate the position of the container. In the first experiment, we dealt with the error resulting in the angle and the distance of the ultrasonic sensor module, which is the most important in the hardware performance; in the second, we evaluated the performance of the location identification algorithm, which is the most important in the software performance, and tested the noise cancellation effects for the EKF. According to the experiment result, the ultrasonic sensor showed an average of 3 to 5cm error up to $45^{\circ}$ in case of $60^{\circ}$ or more, non-reliable linear distances were obtained. In addition, the evaluation of the algorithm performance showed an average of $4^{\circ}{\sim}5^{\circ}$ error due to the error of the linear distance-this error is negligible for most container location identifications. Lastly, the experiment results of noise cancellation and jump preservation by using the EKF showed that noises were removed in the distance information which was entered from the input of the ultrasonic sensor and as a result, only signal was extracted; thus, jumps were able to be removed and the exact distance information between the ultrasonic sensors could be obtained.

• 한국분무공학회지
• /
• 제1권1호
• /
• pp.85-91
• /
• 1996

This experiment was undertaken to investigate spray characteristics of the conventional inject ion system and the ultrasonic energy added inject ion system. Sauter mean diameter was mesured under the variation of inject ion pressure and the spray distance. To measure the droplet size we used the Malvern system 2600C. The spray angle and mass distribution was analyzed to the CCD camera and the patternater. After experiment, it was found that the ultrasonic energy added injection system had smaller sauter men diameter of droplet, wider mass distribution and wider spray angle than the conventional inject ion system had.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.125-132
• /
• 1993

When a mobile robot moves around autonomously without man-made landmarks, it is essential to recognize the placement of surrounding objects especially for current position estimation, obstacle avoidance, or homing into the work station. In this paper, we propose a novel approach to recognize the floor paln for indoor mobile robot navigation using ultrasonic time-of-flight method. We model the floor plan as a collection of polygonal plane objects and recognize the floor plan by locating edges and vertices of the objects. The direction is estimated by the patterns of transmission beam and reception sensitivity of the ultrasonic transducer, and the distance is estimated by the correlation detection method. We show the validity of the proposed approach through experimental results and discuss the resolution and the accuracy of the estimation of direction and distance.

• 한국분무공학회지
• /
• 제11권4호
• /
• pp.234-243
• /
• 2006

Diesel autothermal reforming (ATR) is a chemical process to produce hydrogen for fuel cell applications. Several previous studies were carried out to identify technical issues in diesel reforming. It is hard to vaporize diesel due to its high boiling points. Liquid droplets of diesel result in inhomogeneous fuel mixing with other reactants such as $O_2\;and\;H_2O$, which leads to reduce the reforming efficiency and make undesired coke in reactor. To solve the fuel delivery issue, we applied an ultrasonic device as a fuel injection system. Ultrasonic injector (UI) remarkably enhanced the reforming efficiency. This paper will present the reforming results using UI. And we will discuss about atomization effects of diesel on autothermal reforming reaction.