• 제목/요약/키워드: ultra-wideband communication

검색결과 187건 처리시간 0.027초

초광대역 통신용 LTE/WiMAX 이중대역 안테나 설계 (LTE / WiMAX Dual Band Antenna Design for Ultra-wideband Communications)

  • 김경록;강성운;홍용표;김갑기
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2018년도 춘계학술대회
    • /
    • pp.441-444
    • /
    • 2018
  • 본 논문에서는 초광대역 통신을 위한 LTE/WiMAX용 마이크로스트립 안테나를 설계하였다. 제안된 안테나의 기판은 FR-4(er=4.3)이고 크기는 29[mm] x 45[mm]이며 LTE 주파수대역인 1.82[GHz]와 WiMAX 주파수의 대역인 3.5[GHz]의 대역에서 사용할 수 있는 특성을 갖도록 설계하였다 시뮬레이션은 CST Microwave Studio 2014을 사용하였으며 시뮬레이션 결과 이득은 1.82[GHz]일 때 1.785[dB], 3.5[GHz]일 때 1.720[dB]이다. S-Parameter 또한 원하는 주파수 대역에서 -10dB(WSWR2:1) 이하의 결과를 볼 수 있었고, 광대역성, 소형화, 저가격화, 저손실화 등을 구현하기 위하여 각 단계마다 이론적 근거에 의한 수식을 이용하였고 슬롯의 폭, 길이, 전송선로의 폭 등을 계산하였다. 그러므로 원하는 조건을 만족하여 해당 안테나의 적용이 가능할 것으로 사료된다.

  • PDF

A Hybrid Multiuser Detection Algorithm for Outer Space DS-UWB Ad-hoc Network with Strong Narrowband Interference

  • Yin, Zhendong;Kuang, Yunsheng;Sun, Hongjian;Wu, Zhilu;Tang, Wenyan
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제6권5호
    • /
    • pp.1316-1332
    • /
    • 2012
  • Formation flying is an important technology that enables high cost-effective organization of outer space aircrafts. The ad-hoc wireless network based on direct-sequence ultra-wideband (DS-UWB) techniques is seen as an effective means of establishing wireless communication links between aircrafts. In this paper, based on the theory of matched filter and error bits correction, a hybrid detection algorithm is proposed for realizing multiuser detection (MUD) when the DS-UWB technique is used in the ad-hoc wireless network. The matched filter is used to generate a candidate code set which may contain several error bits. The error bits are then recognized and corrected by an novel error-bit corrector, which consists of two steps: code mapping and clustering. In the former step, based on the modified optimum MUD decision function, a novel mapping function is presented that maps the output candidate codes into a feature space for differentiating the right and wrong codes. In the latter step, the codes are clustered into the right and wrong sets by using the K-means clustering approach. Additionally, in order to prevent some right codes being wrongly classified, a sign judgment method is proposed that reduces the bit error rate (BER) of the system. Compared with the traditional detection approaches, e.g., matched filter, minimum mean square error (MMSE) and decorrelation receiver (DEC), the proposed algorithm can considerably improve the BER performance of the system because of its high probability of recognizing wrong codes. Simulation results show that the proposed algorithm can almost achieve the BER performance of the optimum MUD (OMD). Furthermore, compared with OMD, the proposed algorithm has lower computational complexity, and its BER performance is less sensitive to the number of users.

LR-WPAN에서 저속 ADC를 이용한 주파수 영역상의 고해상 무선 측위 기법 (A frequency Domain based High Resolution Positioning Method using Low Rate ADC in LR-WPAN)

  • 이원철;박운용;홍윤기;최성수
    • 한국통신학회논문지
    • /
    • 제34권2C호
    • /
    • pp.145-152
    • /
    • 2009
  • 임펄스 기반의 초광대역 통신 기술은 이론적으로 근거리에서 고속의 데이터 전송과 고해상도의 거리 인지 및 무선 측위가 가능하다는 장점을 가지고 있지만 이러한 기능들을 수행하기 위해서는 우선적으로 고속의 ADC (Analog to Digital Convertor)가 요구되며 특히, 시간 기반의 무선 측위 기법을 적용할 경우 더욱 그러하다. 그러나 현실적으로 GHz 이상의 고속의 ADC는 매우 고가이기 때문에 본 논문에서 목표로 하는 저비용을 고려한 저속의 무선 개인 영역 네트워크 (Low Rate - Wireless Personal Area Network; LR-WPAN)에서는 부적합하다. 따라서 본 논문에서는 저속의 ADC로 고정밀의 무선 측위가 가능한 주파수 영역에서의 측위 기법을 소개하고 아날로그 단에서 주파수 변환을 위해 FM (Frequency Modulation) 방식을 접목시킨 새로운 형태의 non-coherent 기반의 수신 구조를 제안한다. 제안된 기법에 대한 성능을 검증하기 위해서 IEEE 802.15.4a TG에서 제시한 채널 모델을 적용하였으며 시뮬레이션 결과로부터 제안된 방안의 우수성을 검증하였다.

금속 함체내부로 입사되는 고출력 전자기 펄스에 대한 전자회로의 민감성 분석 (The Susceptibility of Electronic Circuits inside the Cavity by HPEM(High Power Electromagnetics) Environment)

  • 황선묵;권해옥;허창수;최진수
    • 전기학회논문지
    • /
    • 제61권12호
    • /
    • pp.1892-1897
    • /
    • 2012
  • Modern electronic circuits are of importance for the function of communication, traffic systems and security systems. An intentional threat to these systems could be of big casualties and economic disasters. This study has examined susceptibility of electronic circuits inside the cavity by HPEM(High Power Electromagnetics). The UWB measurements were done at an anechoic chamber using a RADAN voltage source, which can generate a transient impulse of about 200 kV. The HPEM wave penetrated inside the metal case appeared to the long damped ringwave of pulse length compared with the incident wave. In addition, the resonant frequency generated inside the metal case occurred primarily in the range of 1~3 GHz. The frequency band of 1~3 GHz was influenced on the electronic circuit, which was confirmed by an external antenna and an internal absorber. The electronic circuit was influenced by HPEM infiltrated into the cavity at the 86 kV/m out of the metal cases. Also in case of an absorber the susceptibility of an electronic circuit was smallest among other cases(aperture, antenna). It is considered that absorber has a function absorbing electromagnetic wave infiltrated into the cavity and simultaneously limiting resonance by varying a boundary condition inside the cavity. Based on the results, electronic equipment systems could be applied to protection that has suited system requirements.

인덕터 피킹기법을 이용한 초광대역 CMOS 저잡음 증폭기 설계 (Design of UWB CMOS Low Noise Amplifier Using Inductor Peaking Technique)

  • 성영규;윤경식
    • 한국정보통신학회논문지
    • /
    • 제17권1호
    • /
    • pp.158-165
    • /
    • 2013
  • 본 논문에서는 3.1-10.6GHz 초광대역 CMOS 저잡음 증폭기의 새로운 구조를 소개하였다. 제안된 초광대역 저잡음 증폭기는 입력 임피던스 정합에 RC 피드백과LC 필터회로를 사용하여 설계되었다. 이 설계에 전류 재사용 구조는 전력소비를 줄이기 위해 채택되었으며, 인덕터 피킹 기법은 대역폭을 확장하기 위하여 적용되었다. 이 초광대역 저잡음 증폭기의 특성을 $0.18-{\mu}m$ CMOS 공정기술로 시뮬레이션을 수행한 결과는 3.1-10.6GHz 대역 내에서 전력이득은 14-14.9dB, 입력정합은 -10.8dB이하, 평탄도는 0.9dB, 잡음지수는 2.7-3.3dB인 것을 보여준다. 또한, 입력 IP3는 -5dBm이고, 소비전력은 12.5mW이다.

UWB 통신용 대수 주기 보우타이 다이폴 배열 안테나 (Log-Periodic Bow-tie Dipole Array(LPBDA) Antenna for UWB Communications)

  • 여준호;이종익
    • 한국산학기술학회논문지
    • /
    • 제12권9호
    • /
    • pp.4095-4100
    • /
    • 2011
  • 본 논문에서는 UWB 통신용으로 사용할 수 있는 대수 주기 보우타이 다이폴 배열 (LPBDA) 안테나에 대하여 연구하였다. 일반적인 LPDA 안테나에서 사용되는 다이폴 소자 대신에 보우타이 형태의 다이폴 소자를 사용하였고, 보우타이 소자의 양끝으로 벌어진 각도에 따른 LPBDA 안테나의 입력 반사계수와 이득 특성을 분석하였다. 양끝으로 벌어진 각도가 증가할수록 LPBDA 안테나의 가장 낮은 동작 주파수가 저주파수 대역으로 이동하여 주파수 대역폭이 늘어나지만, 평균이득은 줄어들었다. 그러나, LPDA 안테나에 비해 이득의 변화는 적고 전후방비가 향상되었다. 표준 LPDA 안테나와 양끝으로 벌어진 각도가 13도인 LPBDA 안테나를 FR4(비유전율 4.4, 두께 0.8 mm) 기판상에 제작하였다. 측정한 이득은 3.1~10.6 GHz 대역에서 표준 LPDA 안테나는 4~6.5 dBi 범위에 있고 LPBDA 안테나는 4.2~5 dBi 범위에 있다.

MMIC 회로를 이용한 위성중계기용 30GHz대 저잡음증폭기 모듈 개발 (A 30 GHz Band Low Noise for Satellite Communications Payload using MMIC Circuits)

  • 염인복;김정환
    • 한국전자파학회논문지
    • /
    • 제11권5호
    • /
    • pp.796-805
    • /
    • 2000
  • 30dB의 선형이득과 2.6dB의 잡음지수 성능을 갖는 위성통신중계기용 30GHz대 저잡음증폭기 모듈이 MMIC와 박막 MIC기술로 개발되었다. 두 종의 MMIC 회로가 저잡음증폭기 모듈에 사용되었는데, 하나는 초저잡음용 MMIC 회로이고, 다른 하나는 광대역 고이득용 MMIC 회로이다. MMIC 회로 제작에 사용된 증폭소자는 0.15$mu extrm{m}$게이트 길이를 갖는 pHEMT이다. 두 개의 MMIC 회로를 상호 연결하고 저잡음증폭기 모듈을 완성하기 위하여 박막기술을 이용하여 마이크로스트립 선로를 구현하였으며, 안정된 DC 전원 공급을 위하여 후막기술을 이용한 바이어스 회로를 개발하였다. 저잡음증폭기 모듈의 입력측은 위성중계기의 안테나로부터의 신호를 받아들이기 위하여 도파관 형태로 설계되었으며, 출력측은 주파수변환부와의 접속을 위하여 K-컨넥터로 구현되었다. 모든 제작 공정에는 실제 위성용 부품 제작 기술이 도입되었으며, 위성중계기에 탑재되는 부품에 요구되는 온도시험 및 진동시험을 실시하였다. 제작된 저잡음증폭기 모듈은 동작목표 대역인 30~31GHz에서 30dB 이상의 이득, $\pm$0.3dB의 이득평탄도, 그리고 2.6dB이하의 우수한 잡음지수를 가진 것으로 측정되었다.

  • PDF