• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.71-72
• /
• 2015

As this study is the one related to the ultra high strength concrete essentially used for high rise buildings, it has analyzed on the flowability of ultra high strength concrete according to the variation of coarse aggregate and fine aggregate. The coarse aggregate was planned as two types including Granite Aggregate (GA) and crushed coarse Limestone Aggregate (LA) while fine aggregate was planned as four types including Sea Sand (SS), Limestone Crushed Fine Aggregates (LFA), Electric Arc Furnace Oxidizing Slag Aggregates (EFA) and Crushed Sand (CS) to perform experiment with a total of eight variables. As a result of analyzing slump flow, 500mm concentration time, U-Box and L-Flow, etc. among the characteristics of fresh concrete, a mix using LA+LFA is determined to show high flowability in case of applying ultra high strength concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.757-760
• /
• 2006

This study aims to manufacture ultra fine cement(UFC) with a multi air-classifier of the dry-type. The classifier employed and devised for materials refining was a cyclone type fitted with an air suction device. This study also investigates the basic physical properties and quality of UFC and evaluates its utilizable possibility as a construction material. The basic properties of the UFC containing granulated blast furnace slag were analyzed and examined through recovery ratio, particle size distribution, scanning electron microscopy and compressive strength. Results obtained from the analysis of ultra fine cement have shown that there are possibilities for manufacturing UFC, which could compensate the weak properties of ordinary Portland cement.

• 한국도로학회논문집
• /
• 제15권5호
• /
• pp.81-89
• /
• 2013

PURPOSES : This study is to evaluate ASR(alkali silica reactivity) resistance of ternary blended binder adding ultra fine mineral admixture. METHODS : This study analyzes ASR expansion using ASTM C 1260 and 1567. RESULTS : This study showed that the fineness of mineral admixture had no effect on ASR expansion. The expansion of ternary blended binder(UFFA 20%+FGGBS 10%) were below 0.1%, and this binder met the ASR standard. Also when adding the CSA expansion agent, ASR expansion slightly decreased. The expansion of latex modified mixture increased by 80% comparing plain mixture. CONCLUSIONS : Ternary blended binder met the ASR standard, and this binder is available in concrete bridge deck overlay.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.91-92
• /
• 2013

The strength of ultra-high-strength concrete can be reduced even if the spalling is prevented at a high temperature. Therefore, in this study, we measured internal temperature history and residual compressive strength using a 300×300×450mm short column specimens which use the fiber(NY 0.15+PP 0.10+SF 0.30vol·%) and respectively silica sand, washed sand, the slag sand. As a result, the temperature history and residual compressive strength are almost similar regardless of the fine aggregate types.

• 한국건축시공학회지
• /
• 제10권6호
• /
• pp.145-154
• /
• 2010

As buildings have become higher and larger, the use of high performance concrete has increased. With this increase, interest in and use of ultra fine powder admixture is also on the rise. The silica fume and BSF are the admixtures currently being used in Korea. However, silica fume is exclusively import dependent because it is not produced in Korea. In the case of BFS, it greatly improves concrete fluidity and long-term strength. But a problem exists in securing early strength. Furthermore, air-cooled slag is being discarded, buried in landfills, or used as road bed materials because of its low activation energy. Therefore, we investigated in this study the usability of nano-slag (both rapidly-chilled and air-cooled) as an alternative material to the silica fume. We conducted a physic-chemical analysis for the nano-slag powder and performed a mortar test to propose quality standards. The analysis and testing were done to find out the industrial usefulness of the BFS that has been grinded to the nano-level.

• 한국산학기술학회논문지
• /
• 제17권2호
• /
• pp.536-544
• /
• 2016

최근 초고층 구조물이 증가함에 따라 구조내력 확보를 위해 80~100 MPa 수준의 초고강도 콘크리트 사용이 증가하고 있는데, 이들 구성 재료 중 사용량이 가장 많은 골재는 종류나 특성에 따라 초고강도 콘크리트의 성능 및 경제성에 미치는 영향이 크므로 이에 대한 고찰이 요구된다. 이에 본 연구에서는 100 MPa 급 초고강도 콘크리트의 공학적 특성에 미치는 잔골재 영향을 고찰하고자, 석회암잔골재(LFA), 전기로 산화 슬래그 잔골재(EFA), 세척사(SFA) 및 화강암 부순 잔골재(GFA)의 4종과 이들을 상호 혼합한 4종의 혼합골재를 선정하여 초고강도 콘크리트의 공학적 특성을 고찰하고자 한다. W/B 20%에서 보통포틀랜드시멘트:플라이애시:실리카흄의 비율을 7:2:1로 조합한 콘크리트를 제조하였다. 연구결과에 따르면 LFA 사용 배합이 양호한 잔골재의 입형 및 입도 등 입자특성에 기인하여 동일 고성능 감수제 사용량에서 가장 높은 슬럼프 플로 및 높은 충전성을 확보하며, 혼합골재 사용 배합에 비해 전반적인 유동성이 우수함을 확인할 수 있었다. 또한, 압축강도 및 자기 수축 저감 성능은 EFA 및 LFA 사용 배합이 여타 골재 종류 및 혼합조합에 비해 골재 자체의 양호한 탄성계수 및 강도 그리고 EFA의 free-CaO에 기인하여 보다 양호한 성능을 갖고 있음을 확인하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.43-44
• /
• 2023

This study evaluated the mechanical and electrical properties of low-cement mortar using a large amount of industrial by-products to reduce carbon emissions from the cement industry. As types of industrial by-products, blast furnace slag and fly ash, which are representative materials, were used, and ultra-high fly ash was mixed and evaluated to solve the problem of initial strength loss. In addition, in order to evaluate the electrical properties, 1% of MWCNT was incorporated relative to the powder mass. As experimental items, the compressive strength was measured on the 1st, 3rd, 7th and 28th days of age, and the rate of change in electrical resistance was measured on the 28th day of age. As a result of the experiment, the initial strength of the test specimen mixed with blast furnace slag and fly ash was significantly lower than that of 100% cement, and the specimen mixed with blast furnace slag showed strength equal to that of cement at 28 days of age. As an electrical characteristic, the electrical resistance was reduced when the load was loaded, and this reason is judged to be the effect of improving the conductivity as the connection between CNTs is narrowed by the compressive load.

• Computers and Concrete
• /
• 제24권5호
• /
• pp.453-458
• /
• 2019

Today, concrete remains the most important, durable, and reliable material that has been used in the construction sector, making it the most commonly used material after water. However, cement continues to exert many negative effects on the environment, including the production of carbon dioxide (CO2), which pollutes the atmosphere. Cement production is costly, and it also consumes energy and natural non- renewable resources, which are critical for sustainability. These factors represent the motivation for researchers to examine the various alternatives that can reduce the effects on the environment, natural resources, and energy consumption and enhance the mechanical properties of concrete. Geopolymer is one alternative that has been investigated; this can be produced using aluminosilicate materials such as low calcium (class F) FA, Ultra-Fine GGBS, and high calcium FA (class C, which are available worldwide as industrial, agricultural byproducts.). It has a high percentage of silica and alumina, which react with alkaline solution (activators). Aluminosilicate gel, which forms as a result of this reaction, is an effective binding material for the concrete. This paper presents an up-to-date review regarding the important engineering properties of geopolymer formed by FA and slag binders; the findings demonstrate that this type of geopolymer could be an adequate alternative to ordinary Portland cement (OPC). Due to the significant positive mechanical properties of slag-FA geopolymer cements and their positive effects on the environment, it represents a material that could potentially be used in the construction industry.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권5호
• /
• pp.77-86
• /
• 2013

본 연구는 물-결합재 비 (W/B)와 잔골재-결합재 비 (F/B)에 따른 알칼리 활성화 슬래그 시멘트 (AASC)의 기초 특성에 관한 연구이다. W/B 비는 0.35, 0.40, 0.45, 그리고 0.50를 선정하였다. 그리고 F/B 비는 1.00에서 3.00까지 0.25 크기로 고려하였다. 알칼리 활성화제는 2M과 4M의 NaOH를 사용하였다. 실험은 플로우, 흡수율, 압축강도, 초음파 속도 그리고 건조수축을 측정하여 비교하였다. 플로우, 압축강도, 흡수율, 초음파 속도 그리고 건조수축 모두 W/B 비가 증가하면 감소하였다. 압축강도는 동일 W/B 비에서 F/B 비가 증가할수록 감소하였다. 또한 특정 F/B 비에서 강도가 증가하는 것을 볼 수 있었다. 그리고 S2 (river sand 2)는 S1 (river sand 1)보다 낮은 물리적 특성을 나타냈는데, 이는 조립률 때문으로 판단된다. 본 실험의 결과 AASC의 공학적 특성은 W/B 비와 F/B 비가 영향을 주는 것으로 판단된다. 최적의 F/B 비는 각 W/B 비에 대해 1.75~2.50 인 것으로 생각된다. 또한 W/(B+F) 비가 0.13과 0.14 사이일 때 AASC 모르타르의 배합설계가 효과적일 것으로 판단된다.

• Structural Engineering and Mechanics
• /
• 제77권1호
• /
• pp.103-114
• /
• 2021

Ultra high strength concrete (UHSC) originally proposed by Richards and Cheyrezy (1995) composed of cement, silica fume, quartz sand, quartz powder, steel fibers, superplasticizer etc. Later, other ingredients such as fly ash, GGBS, metakaoline, copper slag, fine aggregate of different sizes have been added to original UHSC. In the present investigation, the combined effect of coarse aggregate (6mm - 10mm) and steel fibers (0.50%, 1.0% and 1.5%) has been studied on UHSC mixes to evaluate mechanical and fracture properties. Compressive strength, split tensile strength and modulus of elasticity were determined for the three UHSC mixes. Size dependent fracture energy was evaluated by using RILEM work of fracture and size independent fracture energy was evaluated by using (i) RILEM work of fracture with tail correction to load - deflection plot (ii) boundary effect method. The constitutive relationship between the residual stress carrying capacity (σ) and the corresponding crack opening (w) has been constructed in an inverse manner based on the concept of a non-linear hinge from the load-crack mouth opening plots of notched three-point bend beams. It was found that (i) the size independent fracture energy obtained by using above two approaches yielded similar value and (ii) tensile stress increases with the increase of % of fibers. These two fracture properties will be very much useful for the analysis of cracked concrete structural components.