• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.220-220
• /
• 2017

일반적으로 XP-SWMM 모형을 이용한 침수모의를 실시할 경우 과부하 맨홀에 손실계수의 적용 시와 미적용 시에 침수 범위의 차이가 상이함에도 불구하고 보다 실제적인 침수면적의 모의를 위하여 에너지 손실 적용에 대한 도시침수해석의 구체적인 연구가 미흡한 실정이다. 또한 과부하관거에서의 배수능력을 증대하기 위하여 설치되는 맨홀 내 인버트의 침수저감 효과에 대한 분석이 필요한 실정이다. 이원 등(2015)은 군자배수구역을 대상으로 손실계수의 적용 방안 및 손실계수 적용에 따른 침수면적의 변화를 분석하였으나, 맨홀의 형상 및 인버트의 설치유무에 대한 사항을 고려하지 않았다. 그러므로 기 산정된 과부하 맨홀에서의 손실계수를 적용 및 인버트 설치에 따른 침수범위 변화의 분석이 필요할 것으로 판단된다. 본 연구에서는 손실계수 및 인버트 설치 여부에 따른 침수범위의 변화를 분석하기 위하여 도림천의 도림1배수분구를 대상으로 XP-SWMM을 활용하여 침수해석을 실시하였다. 김정수(2010)가 수리모형실험을 통하여 인버트를 설치하지 않은 기본형 맨홀에서 산정된 손실계수 0.61과 반원형, U자형 인버트를 각각 설치했을 시에 0.37, 0.30으로 산정된 손실계수를 XP-SWMM모형의 각 과부하 맨홀에 적용하였다. 침수모의 결과 과부하 맨홀에 손실계수를 적용하지 않은 경우의 침수면적은 21.14 ha로 모의되어 실제 침수면적과 약 60 % 정도의 일치율을 보였으나, 인버트를 설치하지 않은 기본형 맨홀의 손실계수를 적용한 경우의 침수면적은 37.12 ha로 모의되어 실제 침수면적인 35.65 ha와 거의 유사하게 나타났다. 또한 반원형 인버트를 고려한 경우의 침수면적은 28.04 ha, U자형 인버트 설치를 고려한 경우의 침수면적은 25.90 ha로 모의되었다. 인버트를 미적용한 경우의 침수면적과 비교하면 침수면적이 각각 24 %, 30 % 감소하였다. 따라서 도시 침수피해를 저감하기 위해 과부하 맨홀에 인버트를 설치한다면 맨홀내의 에너지 손실이 저감되고 배수능력이 향상되어 침수피해 면적과 침수심을 감소시킬 수 있을 것으로 판단된다.

• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.57-62
• /
• 2023

This paper proposes a tri-band bandpass filter using dual-mode stepped-impedance resonators (SIRs) with parallel coupled structures. The proposed filter adopts U-shaped SIRs with open stubs and parallel coupled lines (PCLs) that have inter-digital and comb-line shorted ends. Two U-shaped SIRs with open stubs build the first and third passband, and the central PCL resonators build the second passband. Five resonators and coupling structures are theoretically analyzed to derive the scattering parameters of the proposed filter. A novel tri-band bandpass filter is designed and fabricated using the induced scattering parameters. The measured result of the fabricated tri-band bandpass filter shows a good agreement with the simulated one.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1997.05a
• /
• pp.36-39
• /
• 1997

단고추(Capsicum annum)는 중앙아메리카와 남아메리카의 열대지방이 원산지로 알려져 있고 매운맛이 없으며 미숙과를 주로 샐러드용으로 이용하는 원추형 과실을 착생하는 품종군으로 일반고추재배와는 달리 반드시 정지 및 유인을 해야만 좋은 과실을 생산할 수 있으며, 유인 및 관리정도에 따라 품질의 차이가 커 이것이 가격에 영향을 미쳐 농가의 소득과 직결되여 있다. 정지와 유인은 보통재배의 경우 U자형과 V자형으로 하고 있으나 노동력이 많이 소요된다. (중략)

• The Korean Journal of Financial Management
• /
• v.23 no.1
• /
• pp.69-100
• /
• 2006

We examine the effect of controlling shareholders ownership structure and related-party transactions(hereafter 'RPT') of publicly traded companies on their firm values during the post-IMF period. In the multivariate regression analysis using control variables such as firm size, capital structure, investment, dividend, profitability and industry dummy that might affect firm values, we find that there exists a significant negative relation between the controlling shareholders ownership structure and firm values proxied by Tobin's Q, and also find that there is a significant negative relation between RPT and the firm values. Those evidences seem to support the controlling shareholders' expropriation hypothesis. Additionally, we investigate the relation between ownership structure and rim value through the piecewise regression analysis. We find a significant 'inverse' U-shape pattern between the controlling shareholders ownership structure and firm values. This result is quite different from the existing literatures that have usually reported an U-shape pattern. In conclusion, the findings in this study do not support the notion that the ownership concentration to the controlling shareholders does negatively affect the firm values monotonically.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.197-200
• /
• 2004

In this paper, a novel triple-band planar inverted F antenna(PIFA) is proposed. The goal of this paper is to design a small antenna which is operated in triple band. Using T-shape slit and stacked U-shape parasitic patch, good impedance matching is achieved in three band. T-shape slit is inserted on the main patch in order to effectively control the excited patch surface current distributions. The proposed antenna occupies a small volume of $26{\times}9.5{\times}6mm^3$, and the obtained impedance bandwidths cover the required operating bandwidths of the GPS(1565-1585MHz), IMT-2000(1885-2200MHz) and Bluetooth (2400-2484MHz) bands.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.2 s.95
• /
• pp.82-86
• /
• 1999

An experimental study has been carried out to reduce bending load, surface roughness and springback in bending process of stainless steel sheets. A U-bending test has been performed to investigate appropriate process parameters for getting better surfaces and accurate dimensions of stainless steel products. In the test, selected process parameters are die material, lubricant, and die clearance. Die materials used in the test are STD11(HRC60), STD11(TiCN), and AMPCO. From the test results, we can suggest that AMPCO dies are most suitable for reducing bending load and surface roughness of stainless steel sheets. And STD11 dies are favorable for avoiding spring-back in the stainless steel sheet-bending.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1584-1589
• /
• 2003

Simple and effectively developed learning control logic is used to control vibration of U type Tuned Liquid Damper system. The purpose of this paper is design optimal control system to deal with unknown errors from nonlinearity and variation that cost modeling difficulty in complex structure and is followed with the desired behavior. Finally this hybrid control method applied to U type Tuned Liquid Damper structure gives the benefit from better performance of precision and stability of the structure by reducing vibration effect. This research leads to safety design in various structure to robust unspecified foreign disturbances such as earthquake.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.41-43
• /
• 1997

This paper represents the comparison of harmonic loss characteristics of the inverter-driven 3-phase squirrel cage induction motor with slit and U-iron bridge slots of rotor. Two-dimensional time-stepped finite element method is used for electromagenetic field analysis. And spectrums of bar current, phase current, and torque are compared in each case.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.4
• /
• pp.79-86
• /
• 2010

Mechanical structures with power sources experience repeated force produced by motors. In result, the life of the pipes reduces and ultimately, the pipes collapse. Such pipes are formed into several shapes and particularly, the U-shape pipe is damaged frequently. In most cases, the U-shape pipe is made with a straight pipe by complicated bending work. During this work process, plastic deformation of the pipe produces residual stress in the pipe. This residual stress significantly affects the fracture behavior of the pipe and induces the change of the stress ratio (min. stress/Max. stress = R). For this reason, residual stress has to be evaluated. In this paper, the residual stress of a U-shaped pipe was evaluated by FEM analysis. In addition, fatigue tests of the U-shaped pipe were performed by using a uniaxial fatigue testing machine. The results of the fatigue test were modified with the results of FEM (Finite Element Method) analysis for residual stress. The modified fatigue test results of the U-shaped pipe were compared with those of a straight pipe.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.6
• /
• pp.485-491
• /
• 2009

Postoperative skeletal stability was evaluated in combination of Le Fort I and U-shaped osteotomies for superior repositioning of maxilla in bi-maxillary surgeries in 30 consecutive patients. The fifteen patients underwent Le Fort I osteotomy alone and the other fifteen patients underwent Le Fort I and U-shaped osteotomies. In all patients, the maxilla was first osteomized and fixed with absorbable plates system. A bilateral sagittal split ramus osteotomy (BSSRO) of the mandible was then carried out and fixation was performed using absorbable plates. Maxillo-mandibular fixation with rubber ring was used for two weeks post-operatively in all patients. Lateral cephalograms were obtained pre-operatively, 1 day post-operatively, 6 months after surgery. The changes in anterior nasal spine (ANS), point A, upper incisior (U1), and point of maxillary tuberosity (PMT) were examined. The maxillas in the fifteen patients of both examination group were repositioned nearly in their planned positions during surgery and no significant post-operative changes in the examined points of the maxilla were found. These results suggest that a combination of a Le Fort I and U-shaped osteotomy is a useful technique for reliable superior repositioning of the maxilla. The post-operative change in the maxilla using this combination osteotomy was comparatively stable.