• Journal of Fisheries and Marine Sciences Education
• /
• v.6 no.1
• /
• pp.11-19
• /
• 1994

The North Pacific midwater trawling which is one of the important fishing methods for Korean fishing industry is working in the Bering Sea and the sea near Kamchaka Peninsula. The catch by Korean midwater trawlers had been recorded about 300 thousands $^{M/_T}$ a year. Six types of midwater trawl net-ordinary midwater trawl net, super-V trawl net, super mesh trawl net, rope trawl net, super plus trawl net and kite trawl net-have been widely used by large trawlers above 1,500gt in size since 1982. Regarding the fishing efficiency, the super plus trawl net and kite trawl net were acknowledged as higher than other nets. Maximum mesh size of super-plus trawl net and kite trawl net ranges about 20m, whereas the length of net about 150m, and high-tech polyethylene is used as the material of rope part. The problems involved in the North Pacific midwater trawl net may be summarized as follows ; (1) The dimension of fishing gear is too big compared with the towing power of trawler. (2) The mesh size of the rope part is too big compared with that of the common netting part. (3) The net is often torn out in the connecting position of the rope part and the netting part. (4) The net is not matched with the trawler and the otter board in many trawlers, so the shape of the trawl gear in the water is instable. (5) The fish school located near head rope, ground rope and side rope in the net recorder is not caught in practice because of the net instability.

• Archives of Plastic Surgery
• /
• v.39 no.5
• /
• pp.518-521
• /
• 2012

Background Skin cancer is the most common malignant tumor in humans. Basal cell carcinoma (BCC) and squamous cell carcinoma (SCC) are the two most common types of skin cancers. When skin cancer is clinically suspected, preoperative biopsies are recommended for a definite diagnosis. However, despite a concern over potential increased risk of metastasis associated with mechanical manipulation, there have been few investigations into whether a preoperative biopsy affected the recurrence of BCC and SCC. Methods Primary BCC or SCC patients who underwent standard surgical excision from 1991 to 2010 were reviewed and a retrospective analysis was performed. Ultimately, 45 BCC patients and 54 SCC patients, who did not meet the exclusion criteria, were analyzed. To identify whether a preoperative biopsy affected the recurrence of BCC and SCC, the recurrence rates of each with and without biopsy were compared. Results Preoperative biopsy had no statistically significant effect on recurrence (BCC, P=0.8680; SCC, P=0.7520). Also, there was no statistical significance between the interval from initial biopsy to first operation and recurrence (BCC, P=0.2329; SCC, P=0.7140). Even though there was no statistical significance, the mean interval from the biopsy to the operation among the BCC patients who underwent preoperative biopsy was 9.2 months in those who had recurrence and 2.0 months in those who had no recurrence. Conclusions There was no statistically significant relationship between preoperative biopsy and recurrence of BCC and SCC. However, there was a tendency toward recurrence in patients with a longer interval between the biopsy and the corrective operation in BCC.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.1
• /
• pp.1-5
• /
• 2010

Acoustic emission(AE) has emerged as a powerful nondestructive tool to detect or monitor preexisting defects and leaks in the vessel structures. A Bragg grating based acoustic emission sensor system is developed. Various type of fiber Bragg grating sensor including the variable length of sensing part was fabricated and prototype sensor system was tested by using PZT pulser and pencil lead break sources. Two types of sensor attachment were used. First, the fiber Bragg grating sensor was attached fully to the surface using bonding agent. Second one is that one part of fiber was attached to the surface partly by bonding and the other part of fiber will be act as a cantilever. That is, the resonant frequency of the fiber Bragg grating sensor will depend on the length of sensing part. The final goal of the sensor system is to provide on-line monitoring of cracks or leaks in reactor vessel head penetration of nuclear power plants.

• Journal of the Korean Institute of Rural Architecture
• /
• v.19 no.4
• /
• pp.67-75
• /
• 2017

This paper overall and systematically investigates of basic design know-how on commonly indwelling timber framework in a folk house in Yeosu area. in other words, Setting the goal of 'investigates of common form of timber framework', and for this goal, surveyed and analyzed for folk house a lot of findable in Yeosu area. As a result, elicits for four types plural common form((1) 4 front 'kan' - a hipped roof construction - front 'toi'/3 'ryang' - no central pillar/side beam type, (2) 4 front 'kan' - a hipped roof construction - front 'toi'/3 'ryang' - one side central pillar/central side beam type, (3) 4 front 'kan' - a hipped roof construction - front/back 'toi'/2'kozu'5'ryang' - no central pillar/side beam type, (4) 4 front 'kan' - a hipped roof construction - front/back 'toi'/'2kozu'5'ryang' - one side central pillar/central side beam type). Common form is at that time, so commonly located in the head of the technician that a form that play an exemplary role in design, or it is concretely assumed for commonly aimed form. in other words, Common form is come into existence on premise for basic design data. Documentation of folk house design know-how is done through this, and the base design and specification of korean private house is written in the contents divided into by areas.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.2
• /
• pp.146-150
• /
• 2015

PURPOSE. This in vitro study aimed to compare the failure load and failure characteristics of two different zirconia framework designs of premolar crowns when subjected to static loading. MATERIALS AND METHODS. Two types of zirconia frameworks, conventional 0.5 mm even thickness framework design (EV) and 0.8 mm cutback of full contour crown anatomy design (CB), were made for 10 samples each. The veneer porcelain was added on under polycarbonate shell crown made by vacuum of full contour crown to obtain the same total thickness of the experiment crowns. The crowns were cemented onto the Cobalt-Chromium die. The dies were tilted 45 degrees from the vertical plane to obtain the shear force to the cusp when loading. All crowns were loaded at the lingual incline of the buccal cusp until fracture using a universal testing machine with cross-head speed 0.5 mm/min. The load to fracture values (N) was recorded and statistically analyzed by independent sample t-test. RESULTS. The mean and standard deviations of the failure load were $1,170.1{\pm}90.9$ N for EV design and $1,450.4{\pm}175.7$ N for CB design. A significant difference in the compressive failure load was found (P<.05). For the failure characteristic, the EV design was found only cohesive failures within veneering porcelain, while the CB design found more failures through the zirconia framework (8 from 10 samples). CONCLUSION. There was a significant difference in the failure load between two designs, and the design of the framework influences failure characteristic of zirconia crown.

• Journal of the Korean Society of Floral Art and Design
• /
• no.41
• /
• pp.61-92
• /
• 2019

We attempted to find the style of flower arrangement from the drawings of Uigwe and paintings of folding screens for the royal ceremonies of the late Joseon dynasty. In the pictures of the Uigwe and folding screens, we could see the linear, circular, and oval types Junhwa used to decorate the left and right sides of the throne placed in the center of main parish at the national banquet. There were also identified the Sanghwa which was used to decorate food on it, Jamhwa which was used to decorate head to be worn on the caps or hats, and Hwaga which was used to decorate the style supporting the large awnings at the national banquet. Hwaga was found, in the Musin Jinchan Dobyeong. In 1795, it was found that decorations on the floor, which are quite similar to the table decorations and modern space decorations, and flower shoot presented by king and flower decorations which were bound to the stick which was presented by king to country old men from Wonhaeng Eulmyo Jeongri Uigwe and Hwaseong Reunghaengdobyeong

• Fisheries and Aquatic Sciences
• /
• v.15 no.2
• /
• pp.117-123
• /
• 2012

The starry flounder Platichthys stellatus, like all flatfish, exhibits conspicuous lateral asymmetry in numerous traits, most obvious of which is the migration of one eye to the other side of the head during metamorphosis. Additional changes related to eye migration include asymmetrical pigmentation, and a behavioral shift from larvae that exhibit upright, open-water swimming to juveniles and adults that lie on the ocean floor, eye side up. However, the morphology of these juveniles has been quite plastic in recent years, a phenomenon which is thought to be related to a diverse suite of semi-intensive and intensive larviculture methods. The cause of morphological abnormalities in the farmed flatfish is poorly understood. In the present study, we observe the features of morphological specificity and abnormality of immature fish (mean total length 23 cm) and survey the occurrence frequency of the specificity and abnormality of juvenile (mean total length 6.70 cm) in artificial culture facility. We find 2 types of abnormality (e.g., albino in ocular side and hypermelanosis in blind side) and 1 type of specificity (e.g., lateral polymorphism). These considerably differ from normal individuals (has sinistral eye and pigmented on only one side) by several characteristics (dextral eye, ocular side albinism, blind side hypermelanosis). The incidences of albinism, hypermelanosis, and body reversal are $10.1{\pm}2.56%$, $91.7{\pm}1.7%$, and $13.1{\pm}1.1%$, respectively. These suggest that these morphometric and morphological differences occur more in artificial environment during and just after metamorphosis.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.43-46
• /
• 2010

As the nuclear power plant has been constructed continuously for several decades in Korea, the welding technology for components manufacturing and installation has been improved largely. Standardization for weld test and qualification was also established systematically according to the concerned code. The welding for the main components requires the high reliability to keep the constant quality level, which means the repeatability of weld quality. Therefore the weld process qualified by thorough test and evaluation is able to be applied for manufacturing. Narrow gap SAW and GTAW process are usually applied for girth seam welding of pressure vessel like Reactor vessel, steam generator, and etc. For the surface cladding with stainless steel and Inconel material, strip welding process is mainly used. Inside cladding of nozzles is additionally applied with Hot wire GTAW and semi-auto welding process. Especially the weld joint having elliptical weld line on curved surface needs a specialized weld system which is automatically rotating with adjusting position of the head torch. The small sized pipe, tube, and internal parts of reactor vessel requests precise weld processes like an automatic GTAW and electron beam welding. Welding of dissimilar materials including Inconel690 material has high possibility of weld defects like a lack of fusion, various types of crack. To avoid these kinds of problem, optimum weld parameters and sequence should be set up through the many tests. As the life extension of nuclear power plant is general trend, weld technologies having higher reliability is required gradually. More development of specialized welding systems, weld part analysis and evaluation, and life prediction for main components should be taken into a consideration extensively.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.3
• /
• pp.193-199
• /
• 2020

A gamma nail has been used to treat intertrochanteric fractures since 1988. Although such cephalomedullary nails have mechanical advantages over extramedullary fixation devices, such as sliding hip screw, their beneficial effects on treating the Arbeitsgemeinschaft für Osteosynthesefragen/Orthopaedic Trauma Association (AO/OTA) 31-A1 and 31-A2 fractures are still controversial. During their 30-year history, many problems have been overcome, and new types of cephalomedullary nails have been introduced in clinical practice. New cephalomedullary nail systems facilitate nailing procedures and enhance the purchase capability of the femoral head by a lag screw. On the other hand, the failure rate still depends on the hands of the orthopedic surgeons. This review article focused on the basic principle of medial support and restoration of a medial buttress during the treatment of trochanteric fractures using a cephalomedullary nail.

• Journal of the Korea Convergence Society
• /
• v.13 no.5
• /
• pp.209-217
• /
• 2022

Virtual reality entered a new phase with the introduction of wearable devices represented by Oculus. This study proposes an immersive virtual reality based on Oculus Rift that enables direct immersion in virtual reality from a first-person perspective for English learning. At this point, it is meaningful to provide considerations when designing instruction for language learning through a comprehensive and integrated review of immersive virtual reality. Therefore, the main purpose of this study is to find a way to maximize the application of language education in the immersive virtual world. And for the design elements for English learning through immersive virtual reality, the setting of learning theory, consideration of differences in learning, selection of learning tasks, regulation of teachers' influence, determination of types of applied senses, flexibility of design, and usage environment were suggested. By integrating the results, various discussions and directions for instructional design were presented.