• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.758-761
• /
• 2003

전원장치의 소형화 핵심기술인 반도체 스위칭 기술을 이용하여 단일 전원을 사용하는 소형, 경량화 전자기기에 적합한 5 V/500 mA급 트랜스리스형 파워 모듈(transless type power module)을 설계하였다. 파워 모듈은 강압형 chopper 방식을 이용한 스위칭회로, 제어회로, 전압검출회로, 그리고 정전압 회로 둥으로 구성되어 있으며, 하이브리드-집적회로형(hybrid-IC type)으로 제작되었다. 본 연구에서 설계한 스위칭 레귤레이터 전원회로는 5 V/500 mA급 트랜스리스형 파워 모듈의 전기적 특성을 만족하였다.

• 한국실내디자인학회논문집
• /
• 제12호
• /
• pp.50-56
• /
• 1997

In the past thirty years, apartment house has been greatly developed and the housing supply has improved some degree. However, the fact is that interior space planning of apartment house still has a lot of problems. The purpose of this study is to research the change of interior room. The 160 examples of unit floor plan(40-85m2 i.e. 12.1py-25.7py) were selected and classified according to master bedroom type and living room area when was constructed by the city of Seoul and KNHC from 1970 to 1990. And then, the change of each area, size and ratio were analyzed and researched. The result of this research can be summarized as follows: 1. Size of unit floor plan was on the increase from 16.02py to 17.86py. 2. 2 bedroom type, master bedroom showed a rise of size and occupancy ratio. Living room grew larger than 1982-1991 for size and occupancy ratio. 3. 3 bedroom type, master bedroom was increased in size and occupancy ratio was reduced to 19.99%. Size of living room became broader than master bedroom and occupancy ratio(1972-1981) increased over 1982-1991. Through this analysis and research, this study is to provide the basic data for actural design process and to suggest future trend of apartment house.

• 한국전기전자재료학회논문지
• /
• 제16권7호
• /
• pp.593-598
• /
• 2003

In this paper, 3rd overtone mode energy-trapped filter using modified PbTiO$_3$ system ceramics was manufactured to apply for intermediate frequency(IF) SMD type fillet with splitted electrode and gap size. To investigate the effects of splitted electrode and gap size on filter characteristics of 3rd overtone mode energy-trapped filter, ceramic wafers were fabricated by etching splitted rectangular electrode size(b$\times$d) of b=0.4, 0.6, 0.8, 1mm, d=0.3, 0.4, 0.5, 0.6mm and gap size(c) c=0.2, 0.3, 0.4, 0.6mm, respectively. And then, SMD type ceramic filter were fabricated with the size of 3.7$\times$3.1$\textrm{mm}^2$. SMD type ceramic filter with the size of b=0.8mm, d=0.4mm and gap(c)=0.4mm, which showed insertion loss of 2.951dB, 3dB bandwidth of 54.7kHz and 20dB stop bandwidth of 129.27kHz, was suitable for IF bandpass filter application.

• 복식문화연구
• /
• 제29권6호
• /
• pp.881-903
• /
• 2021

This study aimed to analyze adult men's body sizes and shapes and suggest size specifications to provide preliminary data to academia and industries. A total of 814 adult men aged 30-44 were selected from the 7th Size Korea data, and 55 direct upper body measurement and calculation items were analyzed using SPSS 25.0. In individual Individual differences, thickness, circumference, and width were high, and height and length were low. Height above the waist base line and shoulder dimension decreased in early 40s age group, while height below the waist base line declined as age increased. In addition, buttocks shape changes were found in early 40s age group. According to factor analysis, 'upper body and upper-extremity horizontal size', 'torso height and upper extremity length', 'shoulder dimension', 'upper body length' and 'shoulder angle' were derived. Using clustering analysis, four different body types were classified: i) big abdomen with flat chest, ii) slender with big, raised shoulders, iii) dwarfish with small, droopy shoulders, and iv) obese with large shoulders. 'Slender with big, raised shoulders' was a typical body shape among men aged 30-44. In older participants, the 'big abdomen with flat chest' ratio was low, while 'obese with large shoulders' was more common. This study proposed size specifications by body type considering the above characteristics.

• 한국세라믹학회지
• /
• 제25권4호
• /
• pp.309-314
• /
• 1988

In this study, the effect of the size of sintered body on resonant and filter characteristics in Pb(Sn1/2Sb1/2)O3-PbTiO3 piezo-electric system were investigated. The attenuation characteristics of ring-dot type and ladder type filter were also investigated. As the size of sintered body was decreased, the resonant characteristic(Fr, Fa) and the center frequency(Fo) were increased. As the poling field was increased, the Kp and bandwidth were increased. The big difference between rign-dot type and ladder type was the sharpness of bandwidth, selectivity and the movement of center frequency.

• 한국응용과학기술학회지
• /
• 제28권1호
• /
• pp.95-101
• /
• 2011

We estimated on the stability of W/O type emulsified fuel using by capacitance sensor, so it concluded the following conclusions. For the first 24 hours, prepared emulsified fuel reveals phase separation ratio of 5%, maintains stable status which verifies the stability of emulsified fuel. Adding more water increases the phase separation ratio rapidly, and adding more surfactant displays stable emulsification. Adding water causes larger size of water droplet diameter, and adding surfactant mixture causes smaller size of water droplet diameter. In conclusion, the size of W/O type emulsified fuel water droplet diameter is directly related to the volume of surfactant, and density of water droplet diameter changes thedistribution according to water contents.

• 산업기술연구
• /
• 제21권A호
• /
• pp.59-64
• /
• 2001

This paper analyzes the performance of the several types of ACL(Asynchronous ConnectionLess) packets used in Bluetooth according to a BER(Bit Error Rate) and a packet length and proposes an optimal packet type and an optimal size of the packet being able to be used under the given BER. This paper proposes how to obtain the optimal packet type and the optimal size of the packet maximizing the performance measure under the given BER. In addition, this paper shows that the optimal type and size of the packet maximizing the throughput are different from those maximizing the mean transmission time. This occurs because the Bluetooth uses not only one type of packet but also various types of packets.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.669-672
• /
• 1999

In this paper, we studied the properties of small-size disk-type ultrasonic motor using travelling wave for the application to the precise control robotic joint motor and fabricated it. The diameter of the ultrasonic motor fabricated was 13mm. Also, the piezoelectric vibrator was constructed by piezoelectric ceramic and elastic material. The piezoelectric ceramic was composed to PZ-PT-PMN which was shown the high electromechanical stability under high vibration level and stainless steel was used as the elastic material in which configuration was disk-type. To conform the capability of application to robotic motor, we measured the change of rotational speed according to applied voltage and applied frequency. As the results, the small-size disk-type ultrasonic motor was able to fabricate, and the revolution speed was 350 (rpm) when input voltage was 55 (Vrms) and applied frequency 160.4 IkHz] under pre-load.

• 수산해양교육연구
• /
• 제25권4호
• /
• pp.928-936
• /
• 2013

This thesis is the fundamental study on the adaptation of escape device for reducing small fishes in set-net. The escape devices for experiments were made the mesh-type devices with three different mesh sizes (60.6, 75.8 and 120.0mm). The experiments of size selectivity on escape devices were conducted by using two kinds of species as black rockfish (Sebastes schlegeli) and sea perch (Lateolabrax maculatusi) in the experimental tank. The size selectivity curve was fitted by using a logistic function and the parameters of selectivity curve were estimated by a maximum likelihood method. In the results; 50% selection ranges for the mesh-type escape devices with three different mesh sizes were; a black rockfish was 18.99 in mesh size 60.6mm and 21.96 in mesh size 75.8mm (120mm could not estimate). A sea perch was 22.02 in mesh 60.6mm and 24.46 in mesh size 75.8mm (120mm could not estimate). The 50% selection range of a black rockfish was wilder than a sea perch about 1.1~.2 time. Therefore, the small fishes are able to reduce by using the mesh type escape device. However, the optimum mesh size should be decided to consider the size of target species and economics of catches.

• 수산해양기술연구
• /
• 제49권3호
• /
• pp.188-199
• /
• 2013

This thesis is the fundamental study on the adaptation of escape device for reducing small size of fish in set-net. The escape devices for experiments were made the grid-type devices with three different slit sizes (15, 20 and 25mm). The experiments of size selectivity on escape devices were conducted by using two kinds of species as black rockfish (Sebastes schlegeli) and sea perch (Lateolabrax maculatusi) in the experimental tank. The size selectivity curve was fitted by using a logistic function and the parameters of selectivity curve were estimated by a maximum likelihood method. In the results; 50% selection ranges for the grid-type escape devices with three different slit sizes were; a black rockfish was 13.30, 19.22 and 22.06cm and a sea perch was 17.64, 20.91 and 22.78cm, respectively. The 50% selection range of a black rockfish was wilder than a sea perch about 1.1~1.3 time. Therefore, the small size of fish are able to reduce by using the grid type escape device. However, the optimum slit size of grid should be decided to consider the size of target species and economics of catches.