• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1643-1646
• /
• 2003

Drawing is a mechanical operation that attenuates thick material to an appropriate thickness for the next processing or end usage. When the input material has the form of a bundle or bundles made of very thin and long shaped wire or fibers, this attenuation operation is called "bundle drawing" or "drafting" Drafting is being used widely in manufacturing staple yarns. which is indispensable for the textile industry. However, the bundle processed by this operation undertake more or less defects in the evenness of linear density. Such irregularities cause many problems not only for the product quality but also for the efficiency of the next successive processes. Since long there have been many researches tying to find out factors affecting the irregularity of linear desity, to obtain optimal drafting conditions, to develop efficient measuring and analysis methods of linear density of bundle, etc., but there exists yet no fundamental equation describing the dynamic behavior of the flowing bundle during processing. In this research a mathematical model for the dynamic behavior of the bundle fluid is to be set up on the basis of general physical lows representing physical variables, i.e. linear density and velocity as the dynamic state of bundle. The conservation of mass and momentum balance was applied to the fluid field of bundle. while the movement of′ individual material was taken into account. The constitutive model relating the surface force and the deformation of bundle was introduced by considering a representative prodedure that stands for the bundle movement. Then a fundamental equations system could be simplified considering a steady state of the process. On the basis of the simplified model, the simulation was performed and the results could be confirmed by the experiments under various conditions.

• Journal of the Korean Vacuum Society
• /
• v.15 no.1
• /
• pp.31-36
• /
• 2006

By analyzing the Ge 34 core-level photoelectron spectrum, we studied the structure of the $Li/Ge(111)-3\times1$ surface. Two surface related components tying on either side of the main bulk peak were identified in the Ge 3d spectrum. The existence and the position of the two surface components in the core-level spectrum from $Li/Ge(111)-3\times1$ is similar to those of the $Li/Ge(111)-3\times1$, suggesting the similarities in structure of the two surfaces. The core-level photoelectron spectra of the Li-induced $Li/Ge(111)-3\times1$ surface are well consistent with the honeycomb-chain-channel model, which was proposed as the structure of the $Si/Ge(111)-3\times1$ induced by alkali metals.

• Journal of Korean Library and Information Science Society
• /
• v.34 no.2
• /
• pp.163-185
• /
• 2003

Although university libraries run by the subject-oriented serviec systems are increasing more and more, many problems are emerging as a result of tying out the subject classification of the sources without an enough advance knowledge, consideration of reality, and the study about effective management of subject-oriented sum system. Through the research of 37 university libraries run by the system of subject-oriented service, it was proved that for the effective subject-oriented service system, the reasonable classification of the subjects, considering the form and structure of the building, the number of users on each subject and the organization of the collection, and the subject librarians, who would take charge of subject-oriented service systems are indispensable. Therefore, the subject-oriented service system to be rooted strongly, the role model of the subject-oriented service system adequate to the reality of Korean university libraries should be developed, and the efforts of the people on the spot such as acquiring enough supports and training of the subject librarians should be arranged.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.3
• /
• pp.188-193
• /
• 2003

Regardless of the distribution of the adaptation data in the testing environment, model-based adaptation methods that have so far been reported in various literature incorporates the adaptation data undiscriminatingly in reducing the mismatch between the training and testing environments. When the amount of data is small and the parameter tying is extensive, adaptation based on outlier data can be detrimental to the performance of the recognizer. The distribution of the adaptation data plays a critical role on the adaptation performance. In order to maximally improve the recognition rate in the testing environment using only a small number of adaptation data, supervised weighted training is applied to the structural maximum a posterior (SMAP) algorithm. We evaluate the performance of the proposed weighted SMAP (WSMAP) and SMAP on TIDIGITS corpus. The proposed WSMAP has been found to perform better for a small amount of data. The general idea of incorporating the distribution of the adaptation data is applicable to other adaptation algorithms.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.9
• /
• pp.96-102
• /
• 2008

The SoC bus topology is classified to single and multiple bus systems due to bus number. In single bus system, the selected only one master among the masters that try to initiate the bus transaction can execute its data transaction. On the other hand, in multiple bus system, as several buses that can be operated independently are connected with bridge, multiple data can be transferred parallel in each bus. However, In the case of data communication from one bus system to the other, data latency has remarkably increased in multiple bus. Furthermore, the performance of multiple bus can be easily different from master number, slave type and so on. In this paper, the performance of single and multiple bus architecture is compared and quantitatively analysed with the variation of master number and slave type especially a tying SDRAM, SRAM and register with TLM simulation method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.50-50
• /
• 2000

In this paper, a new measuring system is :proposed which can measure the fine 6-DOF displacement of rigid bodies. Its measurement principle is based on detection of laser beam reflected from a specially fabricated mirror that looks like a triangular pyramid having an equilateral cross-sectional shape. The mirror has three lateral reflective surfaces inclined 45$^{\circ}$ to its bottom surface. We call this mirror 3-facet mirror. The 3-facet mirror is mounted on the object whose 6-DOF displacement is to be measured. The measurement is operated by a laser-based optical system composed of a 3-facet mirror, a laser source, three position-sensitive detectors(PSD). In the sensor system, three PSDs are located at three corner points of a triangular formation, which is an equilateral triangular formation tying parallel to the reference plane. The sensitive areas of three PSDs are oriented toward the center point of the triangular formation. The object whose 6-DOF displacement is to be measured is situated at the center with the 3-facet mirror on its top surface. A laser beam is emitted from the laser source located at the upright position and vertically incident on the top of the 3-fatcet mirror. Since each reflective facet faces toward each PSD, the laser beam is reflected at the 3-facet mirror and splits into three sub-beams, each of which is reflected from the three facets and finally arrives at three PSDs, respectively. Since each PSD is a 2-dimensional sensor, we can acquire the information on the 6-DOF displacement of the 3-facet mirror. From this principle, we can get 6-DOF displacement of any object simply by mounting the 3-facet mirror on the object. In this paper, we model the relationship between the 6-DOF displacement of the object and the outputs of three PSDs. And, a series of simulations are performed to demonstrate the effectiveness of the proposed method. The simulation results show that the proposed sensing system can be an effective means of obtaining 3-dimensional position and orientation of arbitrary objects.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.1
• /
• pp.81-89
• /
• 2011

The previous land gravity data in Korea showed locally biased irregular distribution. Especially, this problem was more serious in the mountainous area where the data density was significantly low. The same problem appeared in GPS/Levelling data thus the precision of the geoid could not be improved. From 2008, new gravity and GPS/Levelling data has been collected by the unified control point and survey on the benchmark project which were funded by the national geographic information institute. The newly obtained data has much better distribution and precision so that it could be used for update precision of geoid model. In this study, the new precision geoid has been calculated based old and new gravity data and this model showed 5.29cm of precision compared to 927 points of GPS/Levelling data. And the degree of fit and precision of hybrid geoid has been calculated 2.99cm and 3.67cm. The new gravimetric geoid has been updated about 27% over whole country. And it showed 42% of precision update due to collection of new gravity data on the Kangwon/Kyeongsang area which showed quite low distribution. In 2010, about 4,000 points of gravity and 300 points of GPS/Levelling data has been obtained by unified control and survey on benchmark project. We expect that new data will contribute to updating geoid precision and veri tying precision more objectively.