• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.1
• /
• pp.181-187
• /
• 2005

This paper proposes and implements a service model to transfer messages safely for PDA on CDMA wireless network and a secure massage transfer protocol which considers characteristics of PDA. Proposed service uses SMS(Short Message Service) connect to a off-line client device with the wired network for data communication. After receiving SMS message, client device processes the SMS message and creates a data channel through RAS(Remote Access Service), then the data of the server can be pushed to clients. The implemented security protocol can provide safe data transmission on each communication line through two way channels(SMS and data). Also, by using security nonce table, this protocol can reduce a number of transmissions for exchanging a safe session key, so intensity of encryption can be increased.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.10
• /
• pp.522-531
• /
• 2001

A large dispersion value in optical fiber cable should be maintained to suppress the nonlinear effect induced distortion for the narrow channel spaced DWDM system while small value of dispersion is needed for high bit rate transmission. To meet these two requirement simultaneously, dispersion distribution control method during the cabling process was exploited. And dispersion distribution cable was fabricated by the way of designing alternation sections in single cable piece with standard single mode fiber(SSMF) and newly developed negative dispersion fiber(NDF). It is shown that the discretely dispersion varying cable along the axis keep the same average dispersion value of an entire cable length as that of nonzero dispersion shifted fiber(NZDSF) with 3.6 ps/km/nm while the local dispersion is around 17 ps/km/nm of absolute value. Moreover, the developed cable had good optical and mechanical properties and the feasibility of this cable for practical use was confirmed.

• Cartoon and Animation Studies
• /
• s.10
• /
• pp.149-157
• /
• 2006

With the expansion of the Internet population, the online market is achieving a rapid growth and the size of the Internet advertisement market is increasing at a high rate. Different from passive types of information transmission, online media allows active two way communication thanks to communication and network technologies, so they can ascertain the effects of advertisement and users' response immediately. Rich media refer to such new advertisement techniques on the Internet, and are expected to lead the future Internet advertisement market. Thus, the present study purposed to analyze the visual expression elements of rich media advertisements in order to understand and enhance the effects of rich media advertisements with higher interactivity than existing Internet advertisements, and to propose guidelines for applying unique designs for the promotion of businesses and organizations and the provision of effective information to users.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.65-67
• /
• 2001

PLC (Power Line Communication) is the communication method using the existing power line installed in houses and offices to convert and transmit high frequency communication signal from tens of KHz to tens of MHz, and receive the filtered signal using high frequency filter. The advantage of PLC is that PLC uses the existing power line installed in houses and offices so it does not require separate power line. Easy and convenient access using electric outlets is another advantage of PLC. However, PLC has some disadvantages such as limited transmission power, high load interference and noise, variable signal attenuation, characteristic of impedance selective possibility of frequency property. This study designed the boiler temperature control system by unit using the modem designed on the basis of technology used for PLC modem, and designed remote control system using internet. After conducting experiments with those two systems, it was possible to control stably. By commercializing this product, we can avoid unnecessary heating of separate temperature control unit, and save the cost according1y, and it is possible to control on a remote site using internet in a more convenient way.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.7
• /
• pp.18-22
• /
• 2010

In this paper, we propose and analyze the two way ranging (TWR) positioning technique using ultra wideband (UWB) for indoor environment. We employed IEEE 802.15.3a channel as a simulation environment and used to time of arrival (TOA) algorithm. UWB technology in a low transmission power the less the effect of interfering with the existing system, the frequency can be shared so that it can improve the spectral efficiency. And, positioning technique based on UWB with a very narrow pulse width has high accuracy in indoor environment. From the simulation results, it is analyzed the probability of error and positioning performance for channel effects and confirmed usefulness of the proposed scheme.

• Journal of Power System Engineering
• /
• v.12 no.6
• /
• pp.70-77
• /
• 2008

The purpose of this study is to compare the quality of digital radiography image with that of classical film images for welded structure in power plants. The CMOS(Complementary Metal Oxide Semiconductor) flat panel detecter and Agfa D5 film are used to image flaw specimens respectively. In the test, CMOS flat panel detector has been determined to have a better image than that of film image. In the IQI(Image Quality Indicator) transmission test, one or two more line can be seen in digital image than in film image. Digital Radiography Test enabled to successfully detect all defects on the weld specimens fabricated with real reheat stem pipe and boiler tube as well. In the specific comparison test, Digital radiography test detected micro flaws in the size of 0.5 mm in length by 0.5 mm in depth. However, film test has limited it to 1.0 mm in length by 1.0 mm in depth. As a result of this study, digital radiography technology is estimated well enough to perform the inspection in the industry with far more cost effective way, compared to the classical film test.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.2
• /
• pp.178-182
• /
• 2005

The proposed system in this paper is designed to provide users with a means of global location information using Orbcomm satellite communication and X.400 protocol. The system's two-way data transmission capabilities allow users to track mobile or fixed objects anywhere in the world via Internet. This study utilizes the X.400 protocol, and the SIP(Serial Interface Protocol) and self defined control protocol to implement data communication link in this paper. Data processor board connected to SC(Subscriber Communicator) is also designed and implemented to interface with GPS receiver. The experimental results of the proposed global position location system is evaluated through real-time experiments, and we have confirmed it works well according to the protocol designed in this paper.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.11
• /
• pp.3775-3788
• /
• 2014

With the increasing number of the wireless and mobile networks, the way that people use the Internet has changed substantively. Wireless multimedia services, such as wireless video streaming, mobile video game, and mobile voice over IP, will become the main applications of the future wireless Internet. To accommodate the growing volume of wireless data traffic and multimedia services, cognitive radio (CR) and Information-Centric Network (ICN) have been proposed to maximize the utilization of wireless spectrum and improve the network performance. Although CR and ICN have high potential significance for the future wireless Internet, few studies have been conducted on collaborative operations of CR and ICN. Due to the lack of infrastructure support in multi-hop ad hoc CR networks, the problem is more challenging for video streaming services. In this paper, we propose a Cross-layer Video Streaming Mechanism (CLISM) for Cognitive Radio Ad Hoc Information Centric Networks (CRAH-ICNs). The CLISM included two distributed schemes which are designed for the forwarding nodes and receiving nodes in CRAH-ICNs. With the cross-layer approach, the CLISM is able to self-adapt the variation of the link conditions without the central network controller. Experimental results demonstrate that the proposed CLISM efficiently adjust video transmission policy under various network conditions.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1370-1375
• /
• 2004

This article investigates the heat transfer characteristics in a RTA system for LCD manufacturing and suggests a way to evaluate the quality of a poly-Si film from the thin film optics analysis. The transient and one-dimensional conductive/radiative heat transfer equation considering wave interference effect is solved to predict surface temperatures of thin films. In dealing with radiative heat transfer, a one-dimensional two-flux method is used and the ray tracing method is also utilized to account for the wave interference effects. It is assumed that each interface is assumed diffusive but the spectral radiative properties are included. It is found that the selective heating region exists for various wavelengths and consequently may contribute to heat the poly-Si film. Using the formalism of the characteristic transmission matrix, the lumped structure reflectance, transmittance, and absorptance are calculated and they are compared with experimental data of the poly-Si film during the SPC process via the FE-RTA (Field-Enhanced RTA) technology.

• Animal cells and systems
• /
• v.14 no.4
• /
• pp.343-349
• /
• 2010

Ultrastructural studies of vitellogenesis in oocytes and follicle cells during oogenesis in female Protothaca (Notochione) jedoensis were investigated by histological and transmission electron microscope observations. In early vitellogenic oocytes, combined activities of the Golgi complex, mitochondria and rough endoplasmic reticulum in the cytoplasm are associated with autosynthetic vitellogenesis. Furthermore, at this time, many coated vesicles at the basal region of the oolemma of the oocyte lead to the formation of vesicles through endocytosis in the cytoplasm. Through the formation of the coated pits on oolemma during vitellogenesis, the uptake of extrafollicular precursors (nutritive materials) occurs in coated vesicles by endocytosis. Therefore, it is assumed that these exogenous materials are involved in heterosynthetic vitellogenesis. During late oogenesis, exogenous yolk precursors (yolk granules), lipid droplets and proteinaceous yolk granules are present in the cytoplasm of late vitellogenic oocytes. In mature oocytes, small yolk granules appear intermingled and form large mature yolk granules. Thus, two processes of vitellogenesis occur in oocytes by way of endogenous autosynthesis and exogenous heterosynthesis. The follicle cells attached to the oocytes appear to play an integral role in vitellogenesis in this study.