• Radiation Oncology Journal
• /
• v.13 no.4
• /
• pp.403-409
• /
• 1995

Purpose : Authors tried to enhance the safety and accuracy of radiosurgery by verifying stereotacitc target point in actual treatment position prior to irradiation. Materials and Methods : Before the actual treatment, several sections of anthropomorphic head phantom were used to create a condition of unknown coordinates of the target point. A film was sandwitched between the phantom sections and punctured by sharp needle tip. The tip of the needle represented the target point. The head phantom was fixed to the stereotactic ring and CT scan was done with CT localizer attached to the ring. After the CT scanning, the stereotactic coordinates of the target point were determined. The head phantom was secured to accelerator's treatment couch and the movement of laser isocenter to the stereotactic coordinates determined by CT scanning was performed using target positioner. Accelerator's anteroposterior and lateral portal films were taken using angiographic localizers. The stereotactic coordinates determined by analysis of portal films were compared with the stereotactic coordinates previously determined by CT scanning. Following the correction of discrepancy the head phantom was irradiated using a stereotactic technique of several arcs. After the irradiation, the film which was sandwitched between the phantom sections was developed and the degree of coincidence between the center of the radiation distribution with the target point represented by the hole in the film was measured. In the treatment of the actual patients, the way of determining the stereotactic coordinates with CT localizers and angiograuhic localizers was the same as the phantom study. After the correction of the discrepancy between two sets of coordinates, we proceeded to the irradiation of the actual patient. Results : In the phantom study, the agreement between the center of the radiation distribution and the localized target point was very good. By measuring optical density profiles of the sandwitched film along axes that intersected the target point, authors could confirm the discrepancy was 0.3 mm. In the treatment of an actual patient, the discrepancy between the stereotactic coordinates with CT localizers and angiographic localizers was 0.6 mm. Conclusion : By verifying stereotactic target point in actual treatment position prior to irradiation, the accuracy and safety of streotactic radiosurgery procedure were established.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.206-225
• /
• 2019

This paper examines the trade and development aspects of glass mirrors through the literature records of the Joseon Dynasty, and studies the characteristics of existing glass mirror crafts by referring to the terms and types shown in the literature. The glass mirror in the records had called western mirrors(西洋鏡, 洋鏡), glass mirrors(玻璃鏡, 玻瓈鏡), stone mirrors(石鏡), etc. Glass mirrors were imported mainly through trade with Russia and the Qing Dynasty since the 17th century and were banned from importation in the late Joseon Dynasty. These mirrors were something new that caused a great stirring in Joseon society in the 18th century, and in the 19th century, it grew larger as a commodity needed for everyday life, especially with trade with Japan. At that time, glass mirrors were used for various purposes, such as installing large glass at a store, which were not the standard mirror usage of confirming one's appearance. These mirrors surprised Koreans in Joseon who experienced them at Yanjing Liulichang(燕京 琉璃廠) in the 18th and 19th centuries. As a result, the demand for glass mirrors rapidly increased and quickly surpassed that of bronze mirrors. Consequentially, new crafts using glass mirrors instead of bronze mirrors in Joseon began to be produced and used after the 18th century. In particular, integrated flat boards of glass mirrors were developed as crafts used indoors. It was convenient to use the hair comb box, a long-time presence in Joseon society, with the bronze mirror. This kind of mirror remained apparent in various genre paintings, including the Taepyeong Seongsido(太平城市圖, 'A Thriving City in a Peaceful Era') collected the National Museum of Korea which reflect its populism of the times. Also, the Mirror Stand(鏡臺) used in the Qing Period was produced in Joseon, but there was a difference in the way of making the drawers and box shapes between two nations. On the other hand, the Face Mirror(面鏡) was made to look at the face. Various crafts made with the aesthetic sense of Joseon, such as the ox horn inlaying craft technique, were produced with auspicious designs. In the 19th century, glass mirrors were imported from European countries, such as France, Denmark, the Netherlands, and the United Kingdom, however after the end of the 19th century Japanese crafts were popular. Glass mirrors, which were popular in the Meiji and Taisho eras of Japan, were imported and also the Mirror Screen(鏡屛) using large glass mirrors were used. In particular, the mirror screen had developed wood furniture since the previous time, which were used for banquets and large spaces, such as the drawing room, and were imported from China and Japan. In addition, the western architectural effect of attaching a mirror to the wall was also attempted to adjust the brightness of the space and introduce another image and scenery in the mirror. This was done at Deoksugung Palace's Seokjojeon.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.2
• /
• pp.80-98
• /
• 2023

In the late Joseon Dynasty, when the bride would ride a palanquin when she went to live with her in-laws, it was a custom to cover the palanquin with tiger skin to ward off misfortunes that may come her way. The higher classes used tiger skin or leopard skin for this purpose, but the common people had to substitute this expensive item with a tiger pattern painted on a blanket. Such blankets were called hotanja, hogu, hoguyok and the like. The term "hotanja" is a pure Korean word. It is not known when the cover for the bridal palanquin was first used, but it was popular from the end of the 19^th century and then gradually disappeared. This is due to the introduction of new Western style weddings that eliminated the need for a bridal palanquin. The tiger print blanket was used not only to cover the bride's palanquin but also to cover a table or floor during the wedding ceremony. This study ran a material analysis on nine pieces of tiger print blankets. All of the blanket artifacts examined in this study had an outer cover and a lining made of fabric that used cotton thread for the warp and wool thread for the weft. Two kinds of wool were found in the weft thread in the outer covers: fat-tailed sheep hair from China and goat hair for carpets from the Hebei province, China. Records show that "blankets with painted tiger patterns" were imported from Russia, and the imported blankets were from Russia and China. The outer cover can be categorized into six types, and the lining into three types depending on the weave and direction of the thread twist. The hem facing can be divided into four types. The lining and outer cover use the full width of the fabric, which was woven in wide widths of 135 cm or wider. The tiger pattern on the blanket was made by stenciling. The stencil design of the body and tail of the tiger were placed on a red blanket to be painted in white, and then the background color of the tiger, which is yellow, would be painted over the white, and then black stripes would be added. The pattern of the tiger varies, which shows that the blankets were made by various craftspeople. The pattern of the tiger print blanket is usually of a tiger lying down, but there were tiger print blankets with a tiger standing up. The pattern of the tiger grew smaller over time, and flower patterns were added in the background. Decorative elements were gradually added to the tiger print blanket patterns, but its function as a palanquin cover became lost. By taking the features of tiger print blankets into consideration, it can be assumed that there are imported pieces among the remaining pieces, and were produced in various places because it was popular at that time.

• Journal of agricultural medicine and community health
• /
• v.1 no.1
• /
• pp.29-36
• /
• 1976

Introduction Recently, changes in the patterns and concepts of maternity care, in both developing and developed countries have been accelerating. An outstanding development in this field is the number of deliveries taking place in hospitals or maternity centers. In Korea, however, more than 90% of deliveries are carried out at home with the help of untrained relatives or even without helpers. It is estimated that less than 10% of deliveries are assisted by professional persons such as a physician or a midwife. Taking into account the shortage of professional person i11 rural Korea, it is difficult to expect widespread prenatal, postnatal, and delivery care by professional persons in the near future, It is unrealistic, therefore, to expect rapid development of MCH care by professional persons in rural Korea due to economic and sociological reasons. Given these conditions. it is reasonable that an educated village women could used as a "maternity aid", serving simple and technically easy roles in the MCH field, if we could give such a women incentive to do so. The midwife and physician are assigned difficult problems in the MCH field which could not be solved by the village worker. However, with the application of the village worker system, we could expect to improve maternal and child hoalth through the replacement of untrained relatives as birth attendants with educated and trained maternity aides. We hope that this system will be a way of improving MCH care, which is only one part of the general health services offered at the local health centre level. Problems of MCH in rural Korea The field of MCH is not only the weakest point in the medical field in our country hut it has also dropped behind other developing countries. Regarding the knowledge about pregnancy and delivery, a large proportion of our respondents reported having only a little knowledge, while 29% reported that they had "sufficient" knowledge. The average number of pregnancies among women residing in rural areas was 4.3 while the rate of women with 5 or more pregnancies among general women and women who terminated childbearing were 43 and 80% respectively. The rate of unwanted pregnancy among general women was 19.7%. The total rate for complications during pregnancy was 15.4%, toxemia being the major complication. The rate of pregnant women with chronic disease was 7%. Regarding the interval of pregnancy, the rates of pregnancy within 12 months and within 36 months after last delivery were 9 and 49% respectively. Induced abortion has been increasing in rural areas, being as high as 30-50% in some locations. The maternal death rate was shown 10 times higher than in developed countries (35/10,000 live births). Prenatal care Most women had no consultation with a physician during the prenatal period. Of those women who did have prenatal care, the majority (63%) received such care only 1 or 2 times throughout the entire period of pregnancy. Also, in 80% of these women the first visit Game after 4 months of gestation. Delivery conditions This field is lagging behind other public health problems in our country. Namely, more than 95% of the women deliveried their baby at home, and delivery attendance by a professional person occurred only 11% of the time. Attendance rate by laymen was 78% while those receiving no care at all was 16%. For instruments used to cut the umbilical corn, sterilized scissors were used by 19%, non-sterilized scissors by 63% and 16% used sickles. Regarding delivery sheets, the rate of use of clean sheets was only 10%, unclean sheets, vinyl and papers 72%, and without sheets, 18%. The main reason for not using a hospital as a place of delivery was that the women felt they did not need it as they had previously experience easy deliveries outside hospitals. Difficult delivery composed about 5% of the total. Child health The main food for infants (95%) was breast milk. Regarding weaning time, the rates within one year, up to one and half, two, three and more than three years were 28,43,60,81 and 91% respectively, and even after the next pregnancy still continued lactation. The vaccination of children is the only service for child health in rural Korea. As shown in the Table, the rates of all kinds of vaccination were very low and insufficient. Infant death rate was 42 per 1,000 live births. Most of the deaths were caused by preventable diseases. Death of infants within the neonatal period was 83% meaning that deaths from communicable diseases decreased remarkably after that time. Infant deaths which occurred without medical care was 52%. Methods of improvement in the MCH field 1. Through the activities of village health workers (VHW) to detect pregnant women by home visiting and. after registration. visiting once a month to observe any abnormalities in pregnant women. If they find warning signs of abnormalities. they refer them to the public health nurse or midwife. Sterilized delivery kits were distributed to the expected mother 2 weeks prior to expected date of delivery by the VHW. If a delivery was expected to be difficult, then the VHW took the mother to a physician or call a physician to help after birth, the VHW visits the mother and baby to confirm health and to recommend the baby be given proper vaccination. 2. Through the midwife or public health nurse (aid nurse) Examination of pregnant women who are referred by the VHW to confirm abnormalities and to treat them. If the midwife or aid nurse could not solve the problems, they refer the pregnant women to the OB-GY specialist. The midwife and PHN will attend in the cases of normal deliveries and they help in the birth. The PHN will conduct vaccination for all infants and children under 5, years old. 3. The Physician will help only in those cases referred to him by the PHN or VHW. However, the physician should examine all pregnant women at least three times during their pregnancy. First, the physician will identify the pregnancy and conduct general physical examination to confirm any chronic disease that might disturb the continuity of the pregnancy. Second, if the pregnant woman shows any abnormalities the physician must examine and treat. Third, at 9 or 10 months of gestation (after sitting of the baby) the physician should examine the position of the fetus and measure the pelvis to recommend institutional delivery of those who are expected to have a difficult delivery. And of course. the medical care of both the mother and the infants are responsible of the physician. Overall, large areas of the field of MCH would be served by the VHW, PHN, or midwife so the physician is needed only as a parttime worker.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.5
• /
• pp.407-428
• /
• 1991

The eastern coastal area having variability of climate is located within Taebaek mountain range and the east coast of Korea. It is therefore ease to cause the wind damages in paddy field during rice growing season. The wind damages to rice plant in this area were mainly caused by the Fohn wind (dry and hot wind) blowing over the Taebaek mountain range and the cold humid wind from the coast. The dry wind cause such as the white head, broken leaves, cut-leaves, dried leaves, shattering of grain, glume discolouration and lodging, On the other hand the cold humid wind derived from Ootsuku air mass in summer cause such symptom as the poor rice growth, degeneration of rachis brenches and poor ripening. To minimize the wind damages and utilize as a preparatory data for wind injury of rice in future, several experiments such as the selection of wind resistant variety to wind damage, determination of optimum transplanting date, improvement of fertilizer application methods, improvement of soils and effect of wind break net were carried out for 8 years from 1982 to 1989 in the eastern coastal area. The results obtained are summarized as follows. 1. According to available statisical data from Korean meteorological services (1954-1989) it is apperent that cold humid winds frequently cause damage to rice fields from August 10th to September 10th, it is therefore advisable to plan rice cultivation in such a way that the heading date should not be later than August 10th. 2. During the rice production season, two winds cause severe damage to the rice fields in eastern coastal area of Korea. One is the Fohn winds blowing over the Taebaek mountain range and the other is the cold humid wind form the coast. The frequency of occurrence of each wind was 25%. 3. To avoid damage caused by typhoon winds three different varieties of rice were planted at various areas. 4. In the eastern coastal area of Korea, the optimum ripening temperature for rice was about 22.2$^{\circ}C$ and the optimum heading date wad August 10th. The optimum transplanting time for the earily maturity variety was June 10th., medium maturity variety was May 20th and that of late maturity was May 10th by means of growing days degree (GDD) from transplanting date to heading date. 5.38% of this coastal area is sandy loamy soil while 28% is high humus soil. These soil types are very poor for rice cultivation. In this coastal area, the water table is high, the drainage is poor and the water temperature is low. The low water temperature makes it difficult for urea to dissolve, as a result rice growth was delayed, and the rice plant became sterile. But over application of urea resulted in blast disease in rice plants. It is therefore advise that Ammonium sulphate is used in this area instead of urea. 6. The low temperature of the soil inhibits activities of microorganism for phosphorus utilization so the rice plant could not easily absorb the phosphorus in the soil. Therefore phosphorus should be applied in splits from transplanting to panicle initiation rather than based application. 7. Wind damage was severe in the sandy loamy soil as compared to clay soils. With the application of silicate. compost and soil from mointain area. the sand loamy soil was improved for rice grain colour and ripening. 8. The use of wind break nets created a mocro-climate such as increased air. soil and water temperature as well as the reduction of wind velocity by 30%. This hastened rice growth, reduced white head and glume discolouration. improved rice quality and increased yield. 9. Two meter high wind break net was used around the rice experimental fields and the top of it. The material was polyethylene sheets. The optimum spacing was 0.5Cm x 0.5Cm. and that of setting up the wind break net was before panicle initiation. With this set up, the field was avoided off th cold humid wind and the Fohn. The yield in the treatment was 20% higher than the control. 10. After typhoon, paddy field was irrigated deeply and water was sprayed to reduce white head, glume discolouration, so rice yield was increased because of increasing ripening ratio and 1, 000 grain weight.

• Journal of Distribution Research
• /
• v.15 no.3
• /
• pp.71-110
• /
• 2010

1. Introduction Today Internet is recognized as an important way for the transaction of products and services. According to the data surveyed by the National Statistical Office, the on-line transaction in 2007 for a year, 15.7656 trillion, shows a 17.1%(2.3060 trillion won) increase over last year, of these, the amount of B2C has been increased 12.0%(10.2258 trillion won). Like this, because the entry barrier of on-line market of Korea is low, many retailers could easily enter into the market. So the bigger its scale is, but on the other hand, the tougher its competition is. Particularly due to the Internet and innovation of IT, the existing market has been changed into the perfect competitive market(Srinivasan, Rolph & Kishore, 2002). In the early years of on-line business, they think that the main reason for success is a moderate price, they are awakened to its importance of on-line service quality with tough competition. If it's not sure whether customers can be provided with what they want, they can use the Web sites, perhaps they can trust their products that had been already bought or not, they have a doubt its viability(Parasuraman, Zeithaml & Malhotra, 2005). Customers can directly reserve and issue their air tickets irrespective of place and time at the Web sites of travel agencies or airlines, but its empirical studies about these Web sites for reserving and issuing air tickets are insufficient. Therefore this study goes on for following specific objects. First object is to measure service quality and service recovery of Web sites for reserving and issuing air tickets. Second is to look into whether above on-line service quality and on-line service recovery have an impact on overall service quality. Third is to seek for the relation with overall service quality and customer satisfaction, then this customer satisfaction and loyalty intention. 2. Theoretical Background 2.1 On-line Service Quality Barnes & Vidgen(2000; 2001a; 2001b; 2002) had invented the tool to measure Web sites' quality four times(called WebQual). The WebQual 1.0, Step one invented a measuring item for information quality based on QFD, and this had been verified by students of UK business school. The Web Qual 2.0, Step two invented for interaction quality, and had been judged by customers of on-line bookshop. The WebQual 3.0, Step three invented by consolidating the WebQual 1.0 for information quality and the WebQual2.0 for interactionquality. It includes 3-quality-dimension, information quality, interaction quality, site design, and had been assessed and confirmed by auction sites(e-bay, Amazon, QXL). Furtheron, through the former empirical studies, the authors changed sites quality into usability by judging that usability is a concept how customers interact with or perceive Web sites and It is used widely for accessing Web sites. By this process, WebQual 4.0 was invented, and is consist of 3-quality-dimension; information quality, interaction quality, usability, 22 items. However, because WebQual 4.0 is focusing on technical part, it's usable at the Website's design part, on the other hand, it's not usable at the Web site's pleasant experience part. Parasuraman, Zeithaml & Malhorta(2002; 2005) had invented the measure for measuring on-line service quality in 2002 and 2005. The study in 2002 divided on-line service quality into 5 dimensions. But these were not well-organized, so there needed to be studied again totally. So Parasuraman, Zeithaml & Malhorta(2005) re-worked out the study about on-line service quality measure base on 2002's study and invented E-S-QUAL. After they invented preliminary measure for on-line service quality, they made up a question for customers who had purchased at amazon.com and walmart.com and reassessed this measure. And they perfected an invention of E-S-QUAL consists of 4 dimensions, 22 items of efficiency, system availability, fulfillment, privacy. Efficiency measures assess to sites and usability and others, system availability measures accurate technical function of sites and others, fulfillment measures promptness of delivering products and sufficient goods and others and privacy measures the degree of protection of data about their customers and so on. 2.2 Service Recovery Service industries tend to minimize the losses by coping with service failure promptly. This responses of service providers to service failure mean service recovery(Kelly & Davis, 1994). Bitner(1990) went on his study from customers' view about service providers' behavior for customers to recognize their satisfaction/dissatisfaction at service point. According to them, to manage service failure successfully, exact recognition of service problem, an apology, sufficient description about service failure and some tangible compensation are important. Parasuraman, Zeithaml & Malhorta(2005) approached the service recovery from how to measure, rather than how to manage, and moved to on-line market not to off-line, then invented E-RecS-QUAL which is a measuring tool about on-line service recovery. 2.3 Customer Satisfaction The definition of customer satisfaction can be divided into two points of view. First, they approached customer satisfaction from outcome of comsumer. Howard & Sheth(1969) defined satisfaction as 'a cognitive condition feeling being rewarded properly or improperly for their sacrifice.' and Westbrook & Reilly(1983) also defined customer satisfaction/dissatisfaction as 'a psychological reaction to the behavior pattern of shopping and purchasing, the display condition of retail store, outcome of purchased goods and service as well as whole market.' Second, they approached customer satisfaction from process. Engel & Blackwell(1982) defined satisfaction as 'an assessment of a consistency in chosen alternative proposal and their belief they had with them.' Tse & Wilton(1988) defined customer satisfaction as 'a customers' reaction to discordance between advance expectation and ex post facto outcome.' That is, this point of view that customer satisfaction is process is the important factor that comparing and assessing process what they expect and outcome of consumer. Unlike outcome-oriented approach, process-oriented approach has many advantages. As process-oriented approach deals with customers' whole expenditure experience, it checks up main process by measuring one by one each factor which is essential role at each step. And this approach enables us to check perceptual/psychological process formed customer satisfaction. Because of these advantages, now many studies are adopting this process-oriented approach(Yi, 1995). 2.4 Loyalty Intention Loyalty has been studied by dividing into behavioral approaches, attitudinal approaches and complex approaches(Dekimpe et al., 1997). In the early years of study, they defined loyalty focusing on behavioral concept, behavioral approaches regard customer loyalty as "a tendency to purchase periodically within a certain period of time at specific retail store." But the loyalty of behavioral approaches focuses on only outcome of customer behavior, so there are someone to point the limits that customers' decision-making situation or process were neglected(Enis & Paul, 1970; Raj, 1982; Lee, 2002). So the attitudinal approaches were suggested. The attitudinal approaches consider loyalty contains all the cognitive, emotional, voluntary factors(Oliver, 1997), define the customer loyalty as "friendly behaviors for specific retail stores." However these attitudinal approaches can explain that how the customer loyalty form and change, but cannot say positively whether it is moved to real purchasing in the future or not. This is a kind of shortcoming(Oh, 1995). 3. Research Design 3.1 Research Model Based on the objects of this study, the research model derived is