• Journal of Korean Society of Transportation
• /
• v.6 no.1
• /
• pp.33-41
• /
• 1988

The Wisconsin Department of Transportation currently has a Datalog Information System which facilitates the collection of geometric characteristics at every 0.01 mile high way section. The objectives of this study are to develop the plan and profile drawing of a highway section utilizing the Datalog Information system and to develop a methodology of investigating the safety aspects associated with the highway section being considered. For this purpose, two of the highway design elements, the minimum stoping sight distance as well as passing sight distance based on the AASHTO requirements, were applied in this study. A computer program was also developed to facilitate the data processing activity. The results from the computer program and from a manual analysis which adopted the identical methodology used in the computer program were in a good agreement. a few discrepancies between the two results were due to the data collection error and they were believed to be negligible. Using the computerized methodology developed in this study one does not need the plan and profile drawing to investigate the safety of a highway section, which appears to be an essential progress to the Computer Aided design and Draft in highway engineering field.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.233-234
• /
• 2003

Fly ash enters axial compressor when a turbomachinery is operated in an adverse environment. We have numerically investigated erosion of the blade and shroud in the turbulent compressor passage flow under the influence of gas-particle two-phase interaction. There have appeared quasi-three dimensional calculations on this subject but not the complete three-dimensional gas-particle interaction as done in the present work. Lagrangian particle tracing technique is used on the base of parallel processing for efficient calculation. Accuracy of the present code is tested using the benchmark lPL nozzle. In the DFVLR compressor blades, we have shown that a large number of particles passing through the tip clearance make impact on the blade tip and on the shroud. Higher degree of erosion is resulted by the heavier particles due to the centrifugal force.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.203-204
• /
• 2003

Fly ash enters axial compressor when a turbomachinery is operated in an adverse environment. We have numerically investigated erosion of the blade and shroud in the turbulent compressor passage flow under the influence of gas-particle two-phase interaction. There have appeared quasi-three dimensional calculations on this subject but not the complete three-dimensional gas-particle interaction as done in the present work. Lagrangian particle tracing technique is used on the base of parallel processing for efficient calculation. Accuracy of the present code is tested using the benchmark JPL nozzle. In the DFVLR compressor blades, we have shown that a large number of particles passing through the tip clearance make impact on the blade tip and on the shroud. Higher degree of erosion is resulted by the heavier particles due to the centrifugal force.

• Journal of Digital Convergence
• /
• v.19 no.1
• /
• pp.475-483
• /
• 2021

The purpose of this study is to identify the temporal and spatial characteristics of pass accuracy by utilizing the second processing data and official records collected from the 2018 FIFA World Cup Russia video data. For a total of 128 games, the success rate of passes based on the results of the game, passing time, and passing position was two-way ANOVA with repeated measure. The results showed no difference between winning and losing groups, and no interaction effects were found for passing time and location. The difference in passing time was high in the first half, with the highest success rate in the middle of the first half (79.2%) and the middle of the second half (77.9%) in the 15~30 minutes and the 60~75 minutes. Pass success rates were in the order of defense-midfield area (83.9%), midfield-attack area (81.7%), defense area (70.6%) and attack area (61.1%). In conclusion, there was no difference in the passing success rate of the winning and losing teams depending on the characteristics of the relative competitive strength of the World Cup games, and it is believed that follow-up research is needed to analyze the game contents rather than the factors of the winning and losing in the future.

• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.446-452
• /
• 2018

A traffic route is an area associated with high risk for accidents due to the flow of heavy traffic. Despite this concern, most studies related to traffic focus solely on traffic distribution. Therefore, there is a need for studies investigating the characteristics of ships' routes and traffic patterns. In this study, an investigation was carried out to analyze the traffic distribution and pattern in 3 major traffic routes for 3 days. For the purpose of the study, based on the prevailing traffic conditions, the route was divided into 10 gate lines. The ships passing through the lines were also classified into either small, medium and large. ND-K-S (normal distribution, kurtosis, and skewness) test was carried out for the traffic distribution at each gate line based on the information analyzed on each traffic route. The analysis of the results obtained from the ND test showed that large vessels have normal distribution, medium sized vessels have satisfied normal distribution in one-way route only while small sized vessels do not have normal distribution. According to the result obtained from the K-S test, normal traffic pattern shows a significant difference between two-way route and one-way route. Results obtained from the K test result shows that in the case of one-way route, vessels have a traffic pattern using a wide range on traffic route. Further analysis shows that vessels concentrate on one side of route in case of two-way route. Results obtained from the S test show that, in case of one-way route, vessels have a normal traffic pattern according to center line. However, analysis pf the results shows that vessels are shifted to the right side of route in case of two-way route. Despite these findings, it should be noted that this study was carried out in only 3 ports, therefore there is need for investigation to be carried out in various routes and conditions in future studies.

• Korean Institute of Interior Design Journal
• /
• v.18 no.6
• /
• pp.176-183
• /
• 2009

This study was intended to define the spatial concept of the boundary structure of the architectural space as well as evaluate the Hyangdan which well represents the features of Korean traditional building in such a way of reviewing the building structure of Korean traditional residential space. The boundary is categorized into visible boundary and invisible boundary which was also functionally classified into the features of isolating, passing, mediating and overlapping. The major elements comprising the boundary structure was analyzed by the characteristic of the pattern so as to define them as the concept of surrounding, duality, hierarchism, continuity and overlapping. Based on such concepts, a boundary structural characteristics of Hyangdan were reevaluated and outlined as follows. The surrounding feature was seen through the outer side of the structure surrounded, two courtyards and eaves, and a duality showing both the closure of main house and openness of detached house was seen through the characteristics of surrounding structure. And the continuous activities toward the inner room and the empty space to link them in a systematic way and repeatedly aligned rooms reveal the overlapping as continuous and transitional space. And finally, an elevated stylobate demonstrates the hierarchical features of the structure.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1211-1213
• /
• 2002

We have frequently felt it inconvenient to collect fare drawing the card in transportation system. Especially, for subway the fares of mass transportation at rush hours of the days, it's important to find a way to collect fares without unnecessarily delaying passengers. In this paper, we proposed a system for the gateless fare collection passing through the booth in only carrying the card. In this system that RF-ID system and Bluetooth are applied. We designed two wireless communication channels. One is the 125kHz communication channel by FSK and PSK for power supplying on the card and identification and the other is 2.4GHz channel for the collection.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.426-439
• /
• 1996

In this paper, we propose a simple algorithm to calculate the numbers of the passing cars by using an image processing sensor for the digital black and white images with 256 tone level. Shadow is one of the most troublesome factor in image processing. By differencing the tone level, we cannot discriminate between the body of the car and its shadow. In our proposed algorithm, the area of the shadow is excluded by recognizing the position of each traffic lane. For real-time operation and simple calculation, two lines of the tone level are extracted and the existences of cars are recognized. In the experimental application on a high-way, the recognition rate of the real-time operation is more than 94%.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.05a
• /
• pp.119-124
• /
• 2006

Design-Build, one contractor is responsible for both the design and construction, has become more popular since the government framed the policy on how to activate the design-build projects in 1996. The reality is, however, there are many problems encounted on Contractor Selection Method for Public Design-Build Projects. The purpose of this paper is to improve the problems, no way to meet the goal(value) the owners expect from the design-build projects, for instance, not fully reflecting the characteristics of projects and owners intention, not systematical enough to judge if bidders could carry out the contract. This study will insist we introduce Best Value Procurement, which is being commonly used in some advanced countries recently, so that we would properly select the contractor suitable for Best Value concept which totally depends on the owners, types of work and specified conditions. Furthermore, by passing through the Two-Step Procedures following Pre-qualification in Best Value Procurement, we expect it lighten the bidders' burden for proposal and the owners' complicate bid administration.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.10
• /
• pp.2043-2052
• /
• 1994

This paper proposes a new parallel ASIC architecture for real-time image processing to reduce inter-processing element (inter-PE) communication overhead, called a Sliding Memory Plane (SliM) Image Processor. The Slim Image Processor consists of $3\times3$ processing elements (PEs) connected by a mesh topology. With easy scalability due to the topology. a set of SliM Image Processors can form a mesh-connected SIMD parallel architecture. called the SliM Array Processor. The idea of sliding means that all pixels are slided into all neighboring PEs without interrupting PEs and without a coprocessor or a DMA controller. Since the inter-PE communication and computation occur simultaneously. the inter-PE communication overhead, significant disadvantage of existing machines greatly diminishes. Two I/O planes provide a buffering capability and reduce the date I/O overhead. In addition, using the by-passing path provides eight-way connectivity even with four links. with these salient features. SliM shows a significant performance improvement. This paper presents architectures of a PE and the SliM Image Processor, and describes the design of an instruction set.