• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.961-965
• /
• 1998

The rapid development of small-scale (1-10 MJ) Superconducting Magnetic Energy Storage Systems (SMES) can be explained by real perspective of practical implementation of these devices in electro power nets. However the serious problem of all high mechanically stressed superconducting coils-problem of training and degradation (decreasing) of operating current still exists. Moreover for SMES systems this problems is more dangerous because of pulsed origin of mechanical stresses-one of the major sources of local heat disturbances in superconducting coils. We investigated acoustic emission (AE) phenomenon on model and 0.5 MJ SMES coils taking into account close correlation of AE and local heat disturbances. Two-coils 0.5 MJ SMES system was developed, manufactured and tested at Russian Research Center in the frames of cooperation with Korean Electrical Engineering Company (KEPCO) [1]. The two-coil SMES operates with the stored energy transmitted between coils in the course of a single cycle with 2 seconds energy transfer time. Maximum operating current 1.55 kA corresponds to 0.5 MF in each coil. The Nb-Ti-based conductor was designed and used for SMES manufacturing. It represents transposed cable made of Nb-Ti strands in copper matrix, several cooper strands and several stainless steel strands. The coils are wound onto fiberglass cylindrical bobbins. To make AE event information more useful a real time instrumentation system was used. Two main measured and computer processed AE parameters were considered: the energy of AE events (E) and the accumulated energy of AE events (E ). Influence of current value in 0.5 MJ coils on E and E was studied. The sensors were installed onto the bobbin and the external surface of magnets. Three levels of initial current were examined: 600A, 1000A, 2450 A. An extraordinary strong dependence of the current level on E and E was observed. The specific features of AE from model coils, operated in sinusoidal vibration current changing mode were investigated. Three current frequency modes were examined: 0.012 Hz, 0.03 Hz and 0.12 Hz. In all modes maximum amplitude 1200 A was realized.

• Journal of Biosystems Engineering
• /
• 제22권4호
• /
• pp.469-478
• /
• 1997

This study was conducted to develop an automatic nutrient-solution mixing system for small-scale sewers. The nutrient-solution mixing system consisted of a low-cost and precise metering device and data acquisition ＆ control system with a personal computer. and, the metering device was composed of three parts those were supply pumps, metering cylinders and venturi tube. The system controlled electric conductivity(EC) and pH of nutrient-solution based on the time-based feedback control method with the information about temperature, EC, and pH of the nutrient-solution. The performance of the nutrient-solution mixing system was evaluated through the control of EC and pH while compared with those of commercial system. Also an experimental cultivation of tomato was conducted to verify and to improve the developed system. Results of this study were as follows. 1. The correlation coefficient of meteing device between the flow rate and operating time was 0.9999, and the linear reuession equation computed was y=21.759x, where y is the discharge($g$) and x is the operating time(s). 2. Calculated errors for the developed metering device and two commercial pump were $\pm$0.3% $\pm$2.45% and $\pm$1.38 % FS error respectively. 3. An automatic nutrient-solution mixing system based on a low-cost and precise metering device was developed. 4. The full scale errors of the developed system in controlling EC and pH at 23$\pm$1$^{\circ}C$ were $\pm$0.05mS/cm and $\pm$0.2, respectively 5. When using the commercial system, the controlled values of EC and pH of the 500 $\ell$ of water were 1.29 mS/cm and 6.1 pH for the setting points of 1.4 mS/cm and 6.0 pH respectively at 23$pm1^{\circ}C$. 6. The developed nutrient-solution control system showed $\pm$0.05 ms/cm of deviation from the setting EC value over the experimental cultivation period. 7. The deviation from the average values of Ca and Mg mass content in the several nutrient-solution were 0.5% and 1.8% respectively.

• 한국정밀공학회지
• /
• 제25권10호
• /
• pp.41-47
• /
• 2008

This study aims to obtain machining characteristics during AFM (Atomic force Microscope) machining of silicon wafers and to monitor the machining states using acoustic emission. As in micro scale machining, two distinct regimes of deformation, i. e. ploughing regime and cutting regime were observed. First, the transition between the two regimes are investigated by analyzing the "pile-up" during machining. As far as in process monitoring is concerned, in the ploughing repime, no chips have been formed and related AE RMS values are relatively low, In the mean time, in the cutting regime, the RMS values are significantly higher than the ploughing regime, with apparent chip formation. From the results, we found out that the proposed scheme can be used for the monitoring of nanomachining, especially for the characterization of nanocutting mode transition.

• Structural Engineering and Mechanics
• /
• 제74권4호
• /
• pp.559-565
• /
• 2020

This paper intends to progress models to accurately estimate the behavior of fresh concrete under vibration using artificial neural networks (ANNs). To this end, behavior of a full scale precast concrete mold was investigated numerically. Experimental study was carried out under vibration with the use of a computer-based data acquisition system. In this study measurements were taken at three points using two vibrators. Transducers were used to measure time-dependent lateral displacements at these points on mold while both mold is empty and full of fresh concrete. Modeling of empty and full mold was made using ANNs. Benefiting ANNs used in this study for modeling fresh concrete, mold design can be performed. For the modeling of ANNs: Experimental data were divided randomly into two parts such as training set and testing set. Training set was used for ANN's learning stage. And the remaining part was used for testing the ANNs. Finally, ANN modeling was compared with measured data. The comparisons show that the experimental data and ANN results are compatible.

• 한국중재학회지:중재연구
• /
• 제29권4호
• /
• pp.3-31
• /
• 2019

In order to achieve full-scale economic cooperation between North Korea and South Korea, the Gaesong Industrial Complex should reopen first. In this case, the Inter-Korean commercial arbitration system should be clearly established to effectively resolve the disputes arising in the special economic zones of the Gaesong Industrial Complex. Even though the Inter-Korean Investment Security Agreement, the Agreement on the Resolution of Commercial Disputes between North Korea and South Korea, the Agreement on the Formation and Operation of the Inter-Korean Commercial Arbitration Committee, and the Agreement on the Formation and Operation of the Inter-Korean Commercial Arbitration Committee in the Gaesong Industrial District are in place, specific arbitration procedure is not concretely agreed upon and realized between the two Koreas. Therefore, the realization of commercial arbitration between them led by the Ministry of Unification or the government should be accomplished. In addition, it is necessary to consider the administrative trial or administrative litigation system in order to deal with administrative disputes that are not subject to commercial arbitration. Lastly, discussions on legal integration between the two Koreas should continue, focusing on the special economic zone of the Gaesong Industrial Complex, in order to prevent integration from being hindered by a different culture for a long time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.246-248
• /
• 2005

The Controller Area Network (CAN) is being widely used for real-time control application and small-scale distributed computer controller systems. However, CAN may exhibit unfair behavior under heavy traffic conditions. When there are both high and low priority messages ready for transmission, the proposed precedence priority filtering method allows one low priority message to be exchanged between any two adjacent higher priority messages. In this way, the length of each transmission delays is upper bounded. These procedures are implemented as local controllers for the ISHURO (Inha Semyung Humanoid RObot).

• 산업기술연구
• /
• 제23권A호
• /
• pp.193-197
• /
• 2003

This bench-scale research investigated the aeration cycle(on/off) as the controlling factors for nitrogen and phosphorus removal in a 2-stage, intermittent aeration process. At this experiment, the aeration cycle time(air-on/air-off) was 30min/30min, 60min/60min, 90min/90min. Organic matter removal was observed more than 90% regardless of the aeration cycle and phosphorus removal was relatively high when the aeration cycle time was 60min/60min On the other hand. For all of the aeration cycle, TN removal was appeared less than 55%. This result was probably due to the limitation of the external substrate for heterotrophic nitrification and aerobic denitrification.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.219-220
• /
• 2007

In this paper, we proposed image processing technique for automatic real time fire and smoke detection in tunnel environment. To avoid the large scale of damage of fire occurred in the tunnel, it is necessary to have a system to minimize and to discover the incident as fast as possible. The fire and smoke detection is different from the forest fire detection as there are elements such as car and tunnel lights and others that are different from the forest environment so that an indigenous algorithm has to be developed. The two algorithms proposed in this paper, are able to detect the exact position, at the earlier stage of incident.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권3호
• /
• pp.161-170
• /
• 2022

Recently, NAND-type flash memory has been regarded to be new promising storage media for large-scale database systems. For flash memory to be employed for that purpose, we need to reduce its expensive update cost caused by the inablity of in-place updates. To remedy such a drawback in flash memory, we propose a new flash-aware buffering scheme that enables virtual flushing of dirty pages. To this end, we slightly alter the tradional algorithms used for the logging scheme and buffer management scheme. By using the mechanism of virtual flushing, our proposed buffering scheme can efficiently prevent the frequenct occureces of page updates in flash storage. Besides the advantage of reduced page updates, the proposed viurtual flushing mechanism works favorably for shorneing a recocery time in the presense of failure. This is because it can reduce the time for redo actions during a recovry process. Owing to those two benefits, we can say that our scheme couble be very profitable when it is incorporated into cutting-edge flash-based database systems.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제21권9호
• /
• pp.587-595
• /
• 2015

전통적으로 고에너지 물리, 해양, 기상, 천문 우주 등 다양한 과학 분야에서 수천 코어 이상의 CPU를 사용하는 대규모 워크플로우 지원을 요구하고 있으며 이를 위해 대부분 슈퍼컴퓨터와 같은 클러스터 기반의 대용량 시스템이 활용되고 있다. 이러한 시스템은 다수의 사용자 및 기관에 의해 공유되고 있으며, 사용자들의 다양한 요구 사항으로 인해 시스템 운영 및 관리에 많은 어려움이 있다. 본 논문에서는 가상화로 인한 성능 저하 문제를 최소화하고 사용자가 원하는 환경을 동적으로 제공하기 위해 컨테이너 기반 클러스터 관리 플랫폼 방안을 제시하고 구축 사례를 소개한다. 본 논문의 의의는 다음 3가지로 볼 수 있다. 먼저, 컨테이너 기반 가상화 기술과 스케줄러 기능을 연동하여 큰 성능 저하 없이 대규모의 과학워크플로우 지원을 위한 클러스터 구성 및 관리 방안을 제시하였다. 둘째, Docker 와 HTCondor를 활용하여 제시된 방안을 손쉽게 구축한 사례를 소개하였다. 셋째, 널리 활용되는 벤치마크 툴을 이용하여 Docker 성능을 검증하였으며, 다양한 프로그램 언어로 구현된 몬테카를로 시뮬레이션을 통해 과학 워크플로우 지원 예제를 제시하였다.