• Food Science of Animal Resources
• /
• v.33 no.6
• /
• pp.744-751
• /
• 2013

The objective of this study was to assess the physicochemical and sensory changes of a kefir manufactured by a two-step fermentation (MTY, $1^{st}$ step: $37^{\circ}C$ for 9 h; $2^{nd}$ step: $24^{\circ}C$ for 15 h) and compare it with kefirs produced by two conventional methods (GTY, fermentation at $37^{\circ}C$ for 24 h; KEY, $22^{\circ}C$ for 24 h). Rapid changes in pH and titratable acidity (TA) were observed in samples from all three manufacturing methods during fermentation process and storage period. Lactic acid bacteria (LAB) counts of MTY increased gradually up to 12 h of fermentation, reaching 9.28 Log CFU/mL, with maximum value observed in this experiment of 9.48 Log CFU/mL. The LAB counts of all samples decreased significantly during storage. The highest viscosity was observed for MTY (1750-1771 cPs), compared with the lowest viscosity observed for KEY (1250-1277 cPs). The viscosity of all samples increased slightly during storage (1250-1805 cPs, p<0.05), as well as carbon dioxide content (0.01-1.36%, p<0.05), except for GTY. The most significant increase in alcohol concentration during storage period was seen in MTY from 0.01% to 1.36% (p<0.05). MTY scored significantly higher in most items of the sensory analysis, indicating that the product manufactured by the two-step fermentation method is more acceptable compared with conventionally produced kefirs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.8
• /
• pp.1117-1123
• /
• 2021

Object recognition is to identify the location and class of a specific object by analyzing the given image when a specific image is input. One of the fields in which object recognition technology is actively applied in recent years is autonomous vehicles, and this paper describes the trend of image-based object recognition artificial intelligence technology in autonomous vehicles. The image-based object detection algorithm has recently been narrowed down to two methods (a single-step detection method and a two-step detection method), and we will analyze and organize them around this. The advantages and disadvantages of the two detection methods are analyzed and presented, and the YOLO/SSD algorithm belonging to the single-step detection method and the R-CNN/Faster R-CNN algorithm belonging to the two-step detection method are analyzed and described. This will allow the algorithms suitable for each object recognition application required for autonomous driving to be selectively selected and R&D.

• Carbon letters
• /
• v.3 no.4
• /
• pp.219-225
• /
• 2002

The two-step surface modifications of activated carbon was carried out to improve the adsorption capacity of toxic heavy metal ions in liquid phase. Physical and chemical properties of the as-received activated carbon (AC) and two kinds of surface-modified activated carbons ($1^{st}AC$ and $2^{nd}AC$) were evaluated through the BET analysis, surface acidity, and oxides measurements. Specific surface area and pore volume did not significantly change, but surface oxide-group remarkably increased by the surface modification. Equilibrium and batch adsorptions of the various metals, such as Pb, Cd, and Cr, using AC, $1^{st}AC$, and $2^{nd}AC$ were performed at initial pH 5. The adsorption capacity and rate of $2^{nd}AC$ were higher than those of AC and $1^{st}AC$. The carboxylic/sodium carboxylate complex groups were developed from the two-step surface modification of activated carbon, which strongly affected the adsorption of metal ions.

• BMB Reports
• /
• v.29 no.5
• /
• pp.442-447
• /
• 1996

Mutations in codon 12, 13 and 61 of one of the three ras genes, H-ras, K-ras and N-ras, convert these genes into active oncogenes. The presence of H-ras gene mutations have important prognostic implications in various cancers. In this study, the H-ras gene mutations were investigated by two-step PCRRFLP in patients with bladder and stomach cancer. For the control experiments, T24 and SK2 cell lines were used. In a total of 36 bladder cancer patient cases, five (13.9%) mutations were found by this method. Of these, point 12 mutations were two (5.6%) cases and point 61 mutations were three (8.3%) cases. On the other hand, H-ras mutation was not found in 29 cases of stomach cancer. The results of the mutated H-ras gene confirmed by direct sequencing analysis were correlated well with PCR analysis. From the sensitivity test, the H-ras mutation was found to have about 0.2% of mutated DNA mingled in normal DNA. In conclusion, the H-ras mutation has a higher clinical Significance in bladder cancer than stomach cancer. Moreover the two-step PCR-RFLP method is sensitive, rapid and relatively simple for clinical work in detecting H-ras point mutations.

• Nuclear Engineering and Technology
• /
• v.28 no.3
• /
• pp.299-310
• /
• 1996

A two-step approach has been used to obtain a new criterion for the onset of slug formation : (1) In the first step, a more general expression than the existing models for the onset of slug flow criterion has been derived from the analysis of singular points and neutral stability conditions of the transient one-dimensional two-phase flow equations of two-fluid model. (2) In the second step, introducing simplifications and incorporating a parameter into the general expression obtained in the first step to satisfy a number of physical conditions a priori specified, a new simple criterion for the onset of slug flow has been derived. Comparisons of the present model with existing models and experimental data show that the present model agrees very closely with Taitel & Dukler's model and experimental data in horizontal pipes. In an inclined pipe ($\theta$ =50$^{\circ}$), however, the difference between the predictions of the present model and those of existing models is appreciably large and the present model gives the best agreement with Ohnuki et al.'s data.

• The Journal of Korean Academy of Prosthodontics
• /
• v.8 no.1
• /
• pp.15-19
• /
• 1968

To compare on the accuracy of bridge made by various soldering technics, four unit bridges were made on a blass original model. They were soldered to each other in the following three ways : In Group I, one central gap between two pieces of pre-soldered abutments and adjacent pontics were soldered at the final step. In Group II, the two gaps between one piece of pre-soldered pontics and two abutments were soldered at the final step. In Group III. the three gaps between two abutments and two ponitcs were soldered at the same time. Misfitting of those bridges were compared by measuring the spaces created between the retainer margins and the shoulders of preparated original model with a micrometer microscope. The author obtained following results : In the final step, the more number of the soldered gap increased, the more accuracy of the bridge decreased.

• Korean Journal of Child Studies
• /
• v.15 no.1
• /
• pp.23-35
• /
• 1994

This paper investigated children's learning process concerning age and gender, two of the most apparent social roles. The subjects of the study were 72 Korean preschool children between three to five years of age. The Study was designed to examine problems of developmental sequence and horizontal decalage in understanding of these social roles. Two five-step knowledge sequences of age growth and sex constancy were administered utilizing skill theory (Fischer, 1980). Each step in a sequence had different stories of age or sex role with increasing cognitive complexity, but the two sequences were equivalent in complexity. The children were tested under two different assessment conditions:high support condition of elicited imitation and low support condition of free play and the best story. The findings show that, the understanding of age and sex roles develops through the predicted five-step sequences. The understanding of age role seems to develop earlier than that of sex role although the developmental patterns of the two roles are similar. Variations in the children's performances under different conditions were dramatic, especially for the older children.

• East Asian mathematical journal
• /
• v.27 no.3
• /
• pp.319-337
• /
• 2011

We approximate a locally unique solution of a nonlinear equation in a Banach space setting using an inexact two-step Newton-type method. It turn out that under our new idea of recurrent functions, our semilocal analysis provides tighter error bounds than before, and in many interesting cases, weaker sufficient convergence conditions. Applications including the solution of nonlinear Chandrasekhar-type integral equations appearing in radiative transfer and two point boundary value problems are also provided in this study.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.30.1-30
• /
• 2001

This paper describes a new cooperative strategy for two wheelchairs to climb a step. These two wheelchairrobots are connected with a simple linkage mechanism between the rear of one wheelchair and the front of another. Two wheelchair robots climb a step one after the other. In this research, We did not use a method by Which a robot lifts up and supports its weight using any special actuator but a method of handling the robot's moment of rotation by the force of the link which come from the assisting robot. This method is especially influenced by the height of the two robot's link positions. So we study this method from the viewpoint of changing the two-link positions....

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2006.11a
• /
• pp.157-163
• /
• 2006

There are big differences in six sigma applications between manufacturing processes and transactional processes. This paper analyzes the differences between two areas by examining 18 six sigma case studies in Korean companies. To characterize six sigma cases, a step-by-step checklist is developed based on 12-step DMAIC methodology proposed by US six sigma academy. On the basis of those characterized data, the differences between two areas are analyzed. The most significant differences is that statistical tools are widely used in manufacturing processes, but qualitative tools are used in transactional processes during improvement phase.