• 한국수학교육학회지시리즈A:수학교육
• /
• 제39권2호
• /
• pp.151-166
• /
• 2000

The purpose of this study is to understand what two models of SOLO taxonomy and van Hiele theory suggest and find out what relation there is between the category system of the SOLO taxonomy and the thinking level of the van Hiele theory. The van Hiele theory describes in line of ranking level so that it may increase the teaching effects by putting together a class, which takes into consideration the students thoughts. The SOLO taxonomy focused on the response mode of the students rather than the thinking level or the developmental stage of them to pursuit the method that can describe the students understanding in depth quality-wise. Although the SOLO taxonomy and the van Hiele model seem to have different form and character from outside in terms of their goals, a closer examination reveals that the two stances have much in common and that the models are complementary. Although the van Hiele placed more focus on the thoughts, because the conclusion was based on the students responses, the van Hiele theory can be interpreted within the structure identified in the SOLO model. In this study, we have tried to understand how the response structure form the SOLO taxonomy and the thinking level of the van Hiele theory are related, based on the studies of Pegg and Davery1998). If you briefly look at them, there are following corresponding relation between the SOLO taxonomy and the van Hiele theory. a) The relational level(R) in iconic moe is van Hiele level 1. b) The multisturctural level(M$_2$) in the second cycle of concrete-symbolic mode is van Hiel level 2. c) The relation level(R$_2$) in the second cycle of concrete-symbolic mode is van Hiele level 3. d) The unistructural level(U$_2$) in the second cycle of formal mode is van Hiele level 4. e) The postformal mode is van Hiele levle 5. Though it would be difficult to conclude that these correspondences were perfectly done, if you look at their relation, you can see that the learning process of the students were not carried out uniformly. Therefore, by studying the students response structure, using the SOLO taxonomy, and identifying the learning cycle and understand the geometrical concept more in depth.

• 한국전산구조공학회논문집
• /
• 제35권3호
• /
• pp.183-190
• /
• 2022

경주 방폐물 처분시설의 1단계 시설로 건설된 지하 사일로 구조는 2014년에 10만 드럼 규모로 완공되어 현재 운영중에 있다. 지하 사일로 구조는 지름 25m, 높이 50m로써 방폐물을 저장하는 실린더부분과 돔 부분으로 구성되어 있으며, 돔부분은 운영터널과 연결되는 하부 돔 부분과 상부 돔 부분으로 구분할 수 있다. 지하 사일로 구조의 벽체는 철근콘크리트 라이너이고, 두께는 약 1m이다. 본 논문에서는 지하 사일로 구조의 건설과정 및 운영과정의 단계별 유한요소해석을 수행하였다. SMAP-3D 프로그램을 사용하여 2차원 축대칭 유한요소해석을 수행하였다. 2차원 축대칭 유한요소모델의 신뢰성을 검토하고자 3차원 유한요소해석도 수행하였다. 본 논문에서는 지하 사일로 구조의 구조거동을 분석하고 구조적 안전성을 검토결과를 제시하였다.

• 대한토목학회논문집
• /
• 제14권3호
• /
• pp.403-414
• /
• 1994

본 연구에서는 철근콘크리트 격납구조물에서 가상의 냉각재 유출사고에 의한 온도하중과 압력에 따른 거동을 알아보기 위한 비선형 해석을 수행하였다. 시간에 따른 온도하중을 결정하기 위하여 과도온도해석을 통해 격납구조물 단면내의 온도분포를 구하였다. 구조물은 기하학적 비선형성과 재료비선형성을 고려한 쉘요소로 이상화되며, 쉘요소는 두께방향에 따라 변하는 응력을 고려하기 위해 몇 개의 층으로 이루어진 모델을 사용하였다. 본 연구에서는 재료비선형성을 고려하기위해 콘크리트의 압축거동은 Drucker-Prager 항복규준에 의해 모델링하며 부착효과를 고려한 콘크리트의 인장거동을 나타내기 위해 인장증강모델을 사용하였다. 철근은 축방향력만을 받는 분포 철근층으로 모델링하였으며 steel liner는 Von Mises 항복규준에 따라 모델링하였다. 열응력은 인접한 두시간 단계에서의 온도차를 하중증가로 고려하여 초기변형 문제로 변환하여 결정되었다. 본 연구에서의 수치해석결과에 의하면 과도온도해석에 근거한 비선형온도경사를 고려할때의 응력이 고려하지 않을때의 응력에 비해 크게 나타남을 알 수 있었다. 본 연구는 우리나라에서 많이 건설되고 있는 원자력발전소의 정확하고 진보적인 해석을 위하여 비선형해석 기법을 유도하여 제시하였으며, 특히 온도분포의 비선형성과 재료비선형을 고려한 고급 유한요소해석을 가능케하고 있다.

• 콘크리트학회논문집
• /
• 제20권2호
• /
• pp.249-256
• /
• 2008

초고층 건축물의 건설이 증가함에 따라 설계, 시공, 사용 단계에서 구조물의 거동을 정확히 예측하는 연구가 점점 중요해지고 있다. 이러한 초고층 건축물의 거동을 예측하기 위해 많은 연구들이 있어 왔지만 대부분의 연구가 기둥이나 보와 같은 선 요소를 사용한 2차원 골조 해석에 중점을 두고 있다. 최근 초고층 건축물에는 다양한 건축 구조 시스템이 적용되고 있으며, 특히 플랫플레이트 구조를 적용하는 사례가 늘고 있다. 그러나 기존의 2차원 해석기법 만으로는 플랫플레이트 구조를 포함하는 초고층 건축물을 합리적으로 모델링하여 해석하는 것이 어려우며, 구조 부재 간 변형이나 하중 전달 과정을 입체적으로 모사하는 데에도 한계가 있다. 따라서 이 연구에서는 기둥, 보와 같은 구조 부재와 동바리와 같은 비구조 부재를 모델링하기 위한 선 요소와 슬래브 구조 부재를 모사하기 위한 평판 요소를 사용하여 초고층 건축물의 거동을 예측하기 위한 3차원 해석기법을 제안하였다. 구조물의 거동을 보다 합리적으로 예측하기 위해 가설공사와 같은 시공 단계, 크리프와 건조수축과 같은 콘크리트의 비탄성거동의 영향을 고려하였다.

• Smart Structures and Systems
• /
• 제21권4호
• /
• pp.435-448
• /
• 2018

This paper reports the development of a theoretically rigorous method for permanent way engineers to assess the condition of railway ballast under a concrete sleeper with the potential to be extended to a smart system for long-term health monitoring of railway ballast. Owing to the uncertainties induced by the problems of modeling error and measurement noise, the Bayesian approach was followed in the development. After the selection of the most plausible model class for describing the damage status of the rail-sleeper-ballast system, Bayesian model updating is adopted to calculate the posterior PDF of the ballast stiffness at various regions under the sleeper. An obvious drop in ballast stiffness at a region under the sleeper is an evidence of ballast damage. In model updating, the model that can minimize the discrepancy between the measured and model-predicted modal parameters can be considered as the most probable model for calculating the posterior PDF under the Bayesian framework. To address the problems of non-uniqueness and local minima in the model updating process, a two-stage hybrid optimization method was developed. The modified evolutionary algorithm was developed in the first stage to identify the important regions in the parameter space and resulting in a set of initial trials for deterministic optimization to locate all most probable models in the second stage. The proposed methodology was numerically and experimentally verified. Using the identified model, a series of comprehensive numerical case studies was carried out to investigate the effects of data quantity and quality on the results of ballast damage detection. Difficulties to be overcome before the proposed method can be extended to a long-term ballast monitoring system are discussed in the conclusion.

• 한국과학교육학회지
• /
• 제17권1호
• /
• pp.11-19
• /
• 1997

Students' protocols obtained from think-aloud interviews were analyzed in the aspects of the success at first two problem-solving stages (understanding and planning), the time to complete a problem, the time at each problem-solving stage, the number of transition, and the transition rate. These were compared in the aspects of the context of problem, the success in solving problem, students' logical reasoning ability, spatial ability, and learning approach. The results were as follows:1. Students tended to spend more time in everyday contexts than in scientific contexts, especially at the stages of understanding and reviewing. The transition rate during solving a problem in everyday contexts was greater than that in scientific contexts. 2. Unsuccessful students spent more time at the stage of understanding, but successful students spent more time at the stage of planning. 3. Students' logical reasoning ability, as measured with the Group Assessment of Logical Thinking, was significantly correlated with the success in solving problem. Concrete-operational students spent more time in completing a problem, especially understanding the problem. 4. Students' spatial ability, as measured with the Purdue Visualization of Rotations Test and the Find A Shape Puzzle, was significantly correlated with their abilities to understand a problem and to plan for its solution. 5. Students' learning approach, as measured with the Questionnaire on Approaches to Learning and Studying, was not significantly correlated with the success in solving problem. However, the students in deep approach had more transitions and greater transition rates than the students in surface approach.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2007년도 특별심포지엄 논문집
• /
• pp.63-79
• /
• 2007

Several remedial works were attempted to stabilize the collapsed area of the inlet slopes of diversion tunnel, but prevention of any further movement was being only carried out at beginning stage by filling the area with aggregates and rock debris, after several cracks had been initiated and developed around the area. The extra specialty developed folding zone is consisted with highly weathered Greywacke and Black shale. The suggested solution is to improve the properties of the rock mass of failed area by choosing the optimum level of reinforcement through the increment of slope rock support design so as to control the movement of slopes during the re-excavation. The Bakun hydroelectric project includes the construction of a hydroelectric power plant with an installed capacity of 2,520MW and a power transmission system connecting to the existing transmission networks in Sarawak and Western Malaysia. The power station will consist of a 210m height Concrete Faced Rockfill Dam. During the construction of the dam and the power facilities the Balui River has to be diverted of the tunnels is 12m and the tunnel width is 16m at the portal area. This paper describes the stability analysis and design methods for the open cut rock slopes in the inlet area of the diversion tunnels. The geotechnical parameters employed in stability calculations were given as a function of four defined Rock Mass Type (RMT) which were based on RMR system from Bieniawski. The stability calculations procedure of the rock slopes are divided into two stages. In the first stage, it is calculated for the stability of each "global" slope without any rock support and shotcrete system. In the second stage, it is calculated for each "local" slope stability with berms and supported with rock bolts and shotcrete. The monitoring instrumentation was performed continuously and some of the design modification was carried out in order to increase the safety of failed area based on the unforeseen geological risks during the open cut excavation.

• 부모자녀건강학회지
• /
• 제4권1호
• /
• pp.56-67
• /
• 2001

The purpose of this study was to recognize and compare the concrete factors(perception of painless delivery, Strength of labor pain, the time of labor, APGAR score, satisfaction of painless delivery) on primiparae with and without painless delivery. The subjects were 100 primipara with painless delivery and 100 without painless delivery who had delivered at K university's general hospital in Daegu city. The data that were collected from May. 20, 1998 to July. 30 analysed by the SPSS program. The results of the study were summarized as follow; 1) As a result of the perspective of the painless labor, the mean of primiparae with painless labor was higher than primiparae without painless labor. It was statistically significant(t=-2.63, p=0.0093). 2) As a result of the strength of labor pain, the mean of primiparae without painless labor was higher than primiparae with painless labor. And it was statistically significant(t=17.074, p=0.000). 3) As a result of comparison to the time of labor, In the 1st stage, Without painless labor group was higher than the other (t=256, p=0.0114). In the 2nd stage, with painless labor group was higher than the other(t=-2.13, p=0.0346). But in the 3rd stage, there was no significant differences between two groups. 4) As a result of measuring APGAR score, there was no significant differences. 5) As a result of measuring the satisfaction of painless labor in painless labor group, 'satisfied with painless labor' is 77%, but 'unsatisfied with explanation from health care giver' was 33%. On the basis of above findings, the following is suggested ; It is needed a extended study which are designed for multiparae. And also we suggested that independent nursing-intervention program has to be developed for controlling the labor pain that must lead to positive labor experiences.

• 한국실내디자인학회논문집
• /
• 제19권3호
• /
• pp.172-179
• /
• 2010

The Sydney Opera House is built on a peninsula of rock that juts out into Sydney Harbor. The site was once a landing place for ships. Utzon, Architect, designed the theatres for the Opera House to fit the shape. The two theatres were placed side by side so that they both had extensive harbor views. The Sydney Opera House is designed the foyers to take full advantage of these sights. Because the building would be seen from all sides, even from above, it was to be a piece of sculpture. The outside was as important as the inside. The audience enters from behind the stage and walks around to the foyers overlooking the harbour. The wing and backstage areas are small because of the way the foyers wrap around the theatre. The stage is made up of large platform lifts which provide the vertical movement for changing scenery. The sets come up from the workshops below stage. The flytower fits under the largest roof shell and doesn't break the skyline. The important elements are the podium, the shells and the reminders. The podium, the huge monolithic concrete structure, contains hundreds of rooms and nearly all the technical equipment. The podium is clad with pink granite slabs and seen from the water. This design eliminated a maze of fire escape stairs and, at the same time, gave people a wonderful view of the harbour. The egg shell is remarkably strong and express the form as the symbol of the site.

• 한국건설순환자원학회논문집
• /
• 제2권1호
• /
• pp.1-9
• /
• 2014

본 연구에서는 탄소배출 평가기법을 이용한 자재생산단계, 운송단계, 시공단계 뿐 아니라 보수시기 및 보수단위 탄소량을 고려하여 콘크리트 교각의 탄소배출량을 평가하였다. 혼화재료를 포함한 4가지 배합이 고려되었고 Life 365를 이용하여 염화물 침투를 평가하였으며, 이에 따른 보수횟수 및 보수시기를 설정하였다. 또한 목표내구수명동안 구조물의 피복두께를 걷어내어 재타설한 경우와 재타설 후 잔존염화물량을 제거하기 위한 전기화학적 공정의 사용유무에 따른 탄소배출량을 평가하였다. 평가결과 높은 물-결합재비를 가진 배합은 초기 시공단계에서의 탄소량은 상대적으로 적지만 보수횟수의 증가에 따라 탄소량이 증가하였으며, 탈염공법이 적용되는 경우 보수시의 단위 탄소량에 따라 전과정 탄소량이 크게 증가하였다. 보수횟수에 따라 탄소량의 증가가 발생하는데, W/B37-OPC의 경우 9번, W/B50-OPC에서는 18번, W/B40-SG에서는 4번, W/B74-SG는 7번으로 평가되었다. 더 긴 보수 불필요 기간을 가진 RC 구조물이 탄소량 감소에 유리함을 알 수 있다.