• 한국농공학회지
• /
• 제30권3호
• /
• pp.95-105
• /
• 1988

This study refers to the development of a hydrologic model simulating daily inflow and release rates for irrigation reservoirs. A daily - based model is needed for adequate operation of an irrigation reservoir sufficing the water demand for paddy fields which is closely related to meteorological conditions. And the objective or this study is to develop a Daily Irrigation Reservoir Operation Model(DIROM) combining the inflow and the release models which depicts the daily water level fluctuations of an irrigation reservoir, and to evaluate the applicability of the model. DIROM was applied to four reservoirs and daily water levels were simulated and compared to the observed data. The model behaviour was also compared with that of a ten - day based model, Reservoir Operation Study(ROS) which has been applied for determining the design capacity of reservoirs. Various combinations of measured and simulated inflow and release rates for tested reservoirs were used to define the daily water level fluctuations. Simulated release rates and measured inflow data resulted in larger errors, and simulated inflow and release rates produced the smallest errors in water level comparison. Two resevoir operation models, DIROM and ROS were applied to the same reservoir and the simulation results compared. The computational errors of DIROM ware smaller than those of ROS, and DIROM was more sensitive to meteorological conditions. DIROM demonstrated its potenial applicability in water management and operation.

• 한국정밀공학회지
• /
• 제24권8호통권197호
• /
• pp.122-129
• /
• 2007

To evaluate the effect of artificial disc implantation and fusion on the biomechanics of adjacent motion segment, a nonlinear three-dimensional finite element model of whole lumbar spine (L1-S1) was developed. Biomechanical analysis was performed for two different types of artificial disc, ProDisc and SB $Charit{\acute{e}}$ III model, inserted at L4-L5 level and these results were also compared with fusion case. Angular motion of vertebral body, forces on the spinal ligaments and facet joint under sagittal plane loading with a compressive preload of 150 N at a nonlinear three-dimensional finite element model of Ll-S1 were compared. The implant did not significantly alter the kinematics of the motion segment adjacent to the instrumented level. However, $Charit{\acute{e}}$ III model tend to decrease its motion on the adjacent levels, especially in extension motion. Contrast to motion and ligament force changes, facet contact forces were increased in the adjacent levels as well as implanted level for constrained instantaneous center of rotation model, i.e. ProDisc model.

• 한국과학교육학회지
• /
• 제15권3호
• /
• pp.284-290
• /
• 1995

This study examined the effects of the learning cycle model by learner's characteristics such as I.Q., cognitive levels, inquiry skins, cognitive style, activity, reflectiveness. To see the effects of the learning cycle model, nonequivalent control group pretest-posttest multiple treatment designs was used in the study. 99 middle school second-graders(female) were divided into two groups. One group was selected as the experimental group (n=50), the other served at the comparison group(n=49). During the eight-month period, the students in the experimental group were instructed according to the learning cycle model, while the students in the comparison group were instructed according to the traditional instruction methods. Achievement data from science achievement test were analyzed by an ANOVA technique. The results of the study are as follows : 1. Science knowledge achievement. For the lower level students of activity, the learning cycle model is superior to the traditional approaches in science knowledge achievement. 2. Science inquiry skills. For the upper level students of I.Q., cognitive levels, inquiry skills, cognitive style and reflectiveness, the learning cycle model is superior to the traditional approaches in science inquiry skills. 3. Attitudes toward science. For the lower level students of I.Q., cognitive levels, inquiry skills, cognitive style, activity and reflectiveness, the learning cycle model is superior to the traditional approaches in attitudes toward science.

• 대한기계학회논문집A
• /
• 제20권4호
• /
• pp.1241-1250
• /
• 1996

The characteristics of fatigue cumulative damage and fatigue life of 8-harness satin woven CFRP composites with a circular hole under constant amplitude and 2-level block loading are estimated by Stochastic Makov chain model. It is found in this study that the fatigue damage accumulation behavior is very random and the fatigue damage is accumulated as two regions under constant amplitude fatigue loading. In constant amplitude fatigue loading the predicted mean number of cycles to a specified damage state by Markov chain model shows a good agreement with the test result. The predicted distribution of the fatigue cumulative damage by Markov chain model is similar to the test result. The fatigue life predictions under 2-level block loading by Markov chain model revised are good fitted to the test result more than by 2-parameter Weibull distribution function using percent failure rule.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2007년도 춘계학술발표대회
• /
• pp.870-872
• /
• 2007

Sensor networks have been widely applied for data collection. Due to the energy limitation of the sensor nodes and the most energy consuming data transmission, we should allocate as much work as possible to the sensors, such as data compression and aggregation, to reduce data transmission and save energy. Querying extreme values is a general query type in wireless sensor networks. In this paper, we propose a novel querying method called Two-Level Filter (TLF) for querying extreme values in wireless sensor networks. We first divide the whole sensor network into domains using the Distributed Data Aggregation Model (DDAM). The sensor nodes report their data to the cluster heads using push method. The advantages of two-level filter lie in two aspects. When querying extreme values, the number of pull operations has the lower boundary. And the query results are less affected by the topology changes of the wireless sensor network. Through this method, the sensors preprocess the data to share the burden of the base station and it combines push and pull to be more energy efficient.

• 한국정보통신학회논문지
• /
• 제13권6호
• /
• pp.1175-1180
• /
• 2009

차세대 무선랜 표준인 IEEE 802.11n에서는 MAC 계층에서의 처리율을 향상시키기 위해서 프레임 집약 (Frame Aggregation) 기법을 제안하고 있다. IEEE 802.11n의 프레임 집약 기법은 MSDU (MAC Service Data Unit) 단위의 집약 기법 (Aggregate MSDU: A-MSDU)와 MPDU (MAC Protocol Data Unit) 단위의 집약 기법 (Aggregate MPDU: A-MPDU)의 두 가지 기법을 제안하고 있다. 본 논문에서는 A-MSDU와 A-MPDU를 결합한 2단계 프레임 집약 (Two-Level Frame Aggregation) 기법의 성능을 분석한다. 성능 분석을 위해 마르코브 체인에 기반하여 2단계 프레임 집약 기법의 처리율을 모델링한 뒤 이를 이용하여 노드의 수와 채널 상태 등에 따른 프레임 집약 기법의 처리율 변화 추이를 분석한다. 그리고 분석 결과에 기반하여 최적의 프레임 집약 기법을 설계하기 위한 방법을 제시한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.473-476
• /
• 2009

차세대 무선랜 표준인 IEEE 802.11n에서는 MAC 계층에서의 처리율을 향상시키기 위해서 프레임 집약 (Frame Aggregation) 기법을 제안하고 있다. IEEE 802.11n의 프레임 집약 기법은 MSDU(MAC Service Data Unit) 단위의 집약 기법 (Aggregate MSDU: A-MSDU)과 MPDU (MAC Protocol Data Unit) 단위의 집약 기법 (Aggregate MPDU: A-MPDU)의 두 가지 기법을 제안하고 있다. 본 논문에서는 A-MSDU와 A-MPDU를 결합한 2단계 프레임 집약 (Two-Level Frame Aggregation) 기법의 성능을 분석한다. 성능 분석을 위해 마르코브 체인에 기반하여 2단계 프레임 집약 기법의 처리율을 모델링한 뒤 이를 이용하여 노드의 수와 채널 상태 등에 따른 프레임 집약 기법의 처리율 변화 추이를 분석한다. 그리고 분석 결과에 기반하여 최적의 프레임 집약 기법을 설계하기 위한 방법을 제시한다.

• 한국연소학회지
• /
• 제9권2호
• /
• pp.18-29
• /
• 2004

Partial quenching structure of diffusion flames in a turbulent mixing layer has been investigated by the method of flame hole dynamics in oder to develope a prediction model for the phenomenon of turbulent flame lift off. The present study is specifically aimed to remedy the shortcoming of the stiff transition of the conditioned partial burning probability across the crossover condition by employing the level-set method which enables us to include the effect of finite flame edge propagation speed. In light of the level-set simulation results with two models for the edge propagation speed, the stabilizing conditions for turbulent lifted flame are suggested. The flame hole dynamics combined with the level-set method yields a temporally evolving turbulent extinction process and its partial quenching characteristics is compared with the results of the previous model employing the flame-hole random walk mapping based on three critical scalar dissipation rates. The probability to encounter reacting state, conditioned with scalar dissipation rate, demonstrated that the conditional probability has a rather gradual transition across the crossover scalar dissipation rate. Such a smooth transition is attributed to the finite response of the flame edge propagation.

• 한국방재안전학회논문집
• /
• 제13권2호
• /
• pp.53-63
• /
• 2020

본 연구에서는 2차원 흐름 해석 모형인 Hydro_AS-2D 모형을 이용하여 해수면 상승과 극한 홍수 발생 시 창원시 성산구 및 의창구 일대의 침수피해 상황을 모의하고, 그 결과를 3차원 지형 상에 표출한 후 BIM 기술을 이용하여 최적 대피경로를 도출하였다. 기후변화는 홍수재해 측면에서 크게 두 가지 요소에 영향을 미치는데 해수면 상승과 극한 강우사상의 증가이다. 해수면 상승은 그 자체만으로 연안지역에 해수가 범람하여 침수현상을 유발하는 영향을 미칠 수 있을 뿐 아니라 하천의 기점 홍수위를 상승시켜 하천 전체에 걸쳐 홍수위 상승을 유발한다. 본 연구에서는 기후변화에 의한 해수위 상승과 태풍에 의한 폭풍해일에 의한 해수위 상승, 그리고 태풍에 의한 극한 강우사상을 모의조건으로 설정하였다. 창원시의 지형공간정보와 하천정비기본계획의 하천횡단 정보를 이용하여 유역전체의 3차원 공간정보로 구성하고 이를 수치모형화 하였다. 연구대상지역은 BIM 기술을 이용하여 3차원 지형정보 상에 건물의 층고, 대피소 위치 등의 정보를 가지고 있는 3차원 도시정보모델로 구축하였으며, 수치모의 결과를 이 모델 상에 표출하고 대피계획을 위한 분석에 사용하였다. 침수발생 시 대피경로는 시간에 따른 침수 범위의 변화에 따라 대피소로의 경로를 설정하는 알고리즘에 의해 결정되며, 설정된 경로는 직관적인 3차원 공간정보 상에 표출되어 사용자에게 제공된다.

• 품질경영학회지
• /
• 제46권1호
• /
• pp.27-38
• /
• 2018

Purpose: A large number of attributes with mixed levels are often considered in the conjoint analysis. In the cases where attributes have two or three levels, we research on the efficient design of survey questionnaire to estimate all the main effect and two factor interaction effects with a reasonable size of it. Methods: To reduce the number of questions in a questionnaire, the balanced incomplete block mixed level factorial design with minimum aberration was proposed by Lim and Chung (2016). Based on the number of questions and that of the respondents in that design, D-optimality criterion is adopted to find efficient designs where the main effect and two factor interaction effects are estimated. Results: The list of the number of questions and that of the respondents in efficient designs for survey questionnaire are recommended based on the D-efficiency of each design and the proposed selection criteria for the number of both questions and the respondents. By analyzing all the respondents survey data generated by the simulation study, we find the proper model. Conclusion: The proposed methods of designing survey questionnaires seem to perform well in the sense that how often the proper model is found in a simulation study where all the respondents survey data are generated by the simulation model.