• 대한정형도수물리치료학회지
• /
• 제15권2호
• /
• pp.93-97
• /
• 2009

Anatomy: Facet joint syndrome most often affects the lower back and neck and refers to pain that occurs in the facet joints, which are the connections between the vertebrae in the spine that enable the spine to bend and twist. Many physicians have believed that the usual lesion of facet syndrome was an anatomical impairments of facet joint itself.. Facet joint injection using local anesthetics is a reliable method for the diagnosis and treatment for facet syndrome. Etiology: One of many possible causes is imbalances that can occur in stress levels, hormone levels, and nutritional levels. These imbalances can adversely affect posture, which can lead to neck and back pain. The common disorder called facet syndrome exhibits lower back pain, with or without, radiating pain to buttock and thigh due to facet joint arthropathy. Pain in the facet joint is supposedly the secondary effect of narrowing of joint space by sustained muscle contracture around joints. Syndrome: Facet joint syndrome tends to produce pain or tenderness in the lower back that increases with twisting or arching the body, as well as pain that moves to the buttocks or the back of the thighs. Other symptoms include stiffness or difficulty standing up straight or getting out of a chair. Pain can be felt in other areas such as the shoulders or mid-back area. Treatment: Non-drug treatments include hot packs, ultrasound, electrical stimulation, and therapeutic exercises. Stimulating blood flow using massage or a hot tub may also help. Alternative treatments include yoga and relaxation therapy. If your pain persists after trying these treatments, a surgical procedure called radiofrequency rhizotomy, which destroys the sensory nerves of the joint, may bring relief. Facet joint injection has been helpful in diagnosis and therapy for this facet syndrome. Radiofrequency thermocoagulation of medial branches is known to be an effective method of relieving pain caused by facet joint problems. We conclude that spasmolytic treatment of muscles connecting the two vertebral articular space would be better for treatment and diagnosis of facet syndrome rather than facet block with local anesthetic and steroid only.

• 인문언어
• /
• 제1권1호
• /
• pp.33-63
• /
• 2001

This article does not deal with a theory or theories in the usual sense of the term but rather harks back to its etymological source, theorein ' to look at.' The phrase 'theory of language' thus purports a 'view of language' and does not carry the force of scientific explication of language. In fact, the word ' scientific' or 'science' per se originates from scire 'to know' and is here to be considered not so much in regard to some kind of positivistic methodology as a form of knowledge. If this exposition sounds unduly ingenious, that is because one is caught up in all kinds of presuppositions about the words under consideration. Sometimes, when we come to grips with an issue that strikes our mind as truly important, our language, by the light of which we hope to proceed safely, plays the will-o'-the-wisp instead and leaves us in the middle of a murky maze, twisting what was at first blush a mere cinch into a Gordian knot. On such occasions, etymology comes along the way and sends us back to itself as its own principle: Resort to etymos logos 'original, true word'! The main thrust of the present study is that alongside the quantitative, positivistic thought there is another equally valuable mode of qualitative and humanistic thinking that makes a whole gamut of new and concrete investigations possible, that an integrated theory of language is Possible by way of a happy amalgamation of diversified, humanistic views of language. With this idea as the leitmotif we explore two models of theory which typically set themselves up for a 'scientific' approach to language: analytic philosophy that delves into what it calls logical simples, and contemporary linguistics that stubbornly teeters around some formal rigor or other. It is argued that they are both characterized by a looking away from the fluid, ill-definable aspects of language, giving a preference to segments and isolated facts as a means to avoid those larger wholes and totalities which if they had to be seen would in the long run lead to an uncomfortable state of mind. Language, in the final analysis, is a Protean entity: so capricious and multifarious, and yet so noetic and prophetic, that we should catch sight of its picturesque images in their entirety to give form to an integrated theory of language.

• 대한정형도수물리치료학회지
• /
• 제4권1호
• /
• pp.71-82
• /
• 1998

The purpose of this study is to analyze the phases of back pain occurring on pregnant women, and to raise the necessity of the pain management on the basis of the former analysis. The objective group is 284 pregnant women who visited department of OBGY of hospital located both in Seoul and Andong. The results are as follows; 1. 204(71.8%) pregnant women were suffering from back pain. The ratio of pain occurrance in terms of the duration of pregnancy shows that 78.3% within 3 pregnant months, 68.4% between four and six months and 72.1% over seven month. Most common ares of pain was low back area rating 60.5%. 2. The most painful postural for the suffering women was lying on the back rating 35.9% and the next painful posture was standing rating 34.4%. And the most painful movement was to maintaining continues movement(57.8%). Twisting back rates the second(17.2%). These two variables were relevant each other(p<0.05). 3. 46.7% of pregnant women were experiencing nocturnal pain. Among women experienced the pain before pregnancy, 39.9% were suffering during the pregnancy. The occurrence of nocturnal pain was related to the pain before and after the pregnancy(p<0.05). 4. 58.8% of pregnant women who experience back pain take the pain for granted as a normal proceeding of pregnancy while 3.9% recognize the symptom as an abnormal. Pain recognition in accordance with the phases does not show much difference(p<0.05). 5. It is shown that the more one delivers the number of babies, the faster back pain occurs(p<0.01). 6. 32.3% of the pain-suffering women have family member(s) having back pain. Family member(s) of the women who does not experience the pain don't have the pain either. This case reports 46.1%. Statistically, these two variables are relevant(p<0.01). 7. 43.0% of back pain experiencing women does not have any particular management plan against the pain. 20.7% is exercising as for prevention. Women who recognize the necessity of some means of therapy for their pain marked 42.9%. The majority(65.8%) of women responded exercise gymnastic work-out are most appropriate pain management. The above results show that a great number of pregnant women is experiencing back pain, however, they properly managed. This span suggests that appropriate advocacy and education for pregnant women is necessary. It is recommended that positive contribution can be made to better health of pregnant women when pain management by physical therapist is given.

• Journal of Biosystems Engineering
• /
• 제2권1호
• /
• pp.7-24
• /
• 1977

This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.80-81
• /
• 2012

Recently, one of the critical issues in the etching processes of the nanoscale devices is to achieve ultra-high aspect ratio contact (UHARC) profile without anomalous behaviors such as sidewall bowing, and twisting profile. To achieve this goal, the fluorocarbon plasmas with major advantage of the sidewall passivation have been used commonly with numerous additives to obtain the ideal etch profiles. However, they still suffer from formidable challenges such as tight limits of sidewall bowing and controlling the randomly distorted features in nanoscale etching profile. Furthermore, the absence of the available plasma simulation tools has made it difficult to develop revolutionary technologies to overcome these process limitations, including novel plasma chemistries, and plasma sources. As an effort to address these issues, we performed a fluorocarbon surface kinetic modeling based on the experimental plasma diagnostic data for silicon dioxide etching process under inductively coupled C4F6/Ar/O2 plasmas. For this work, the SiO2 etch rates were investigated with bulk plasma diagnostics tools such as Langmuir probe, cutoff probe and Quadruple Mass Spectrometer (QMS). The surface chemistries of the etched samples were measured by X-ray Photoelectron Spectrometer. To measure plasma parameters, the self-cleaned RF Langmuir probe was used for polymer deposition environment on the probe tip and double-checked by the cutoff probe which was known to be a precise plasma diagnostic tool for the electron density measurement. In addition, neutral and ion fluxes from bulk plasma were monitored with appearance methods using QMS signal. Based on these experimental data, we proposed a phenomenological, and realistic two-layer surface reaction model of SiO2 etch process under the overlying polymer passivation layer, considering material balance of deposition and etching through steady-state fluorocarbon layer. The predicted surface reaction modeling results showed good agreement with the experimental data. With the above studies of plasma surface reaction, we have developed a 3D topography simulator using the multi-layer level set algorithm and new memory saving technique, which is suitable in 3D UHARC etch simulation. Ballistic transports of neutral and ion species inside feature profile was considered by deterministic and Monte Carlo methods, respectively. In case of ultra-high aspect ratio contact hole etching, it is already well-known that the huge computational burden is required for realistic consideration of these ballistic transports. To address this issue, the related computational codes were efficiently parallelized for GPU (Graphic Processing Unit) computing, so that the total computation time could be improved more than few hundred times compared to the serial version. Finally, the 3D topography simulator was integrated with ballistic transport module and etch reaction model. Realistic etch-profile simulations with consideration of the sidewall polymer passivation layer were demonstrated.