• Journal of the Korean Institute of Rural Architecture
• /
• v.21 no.2
• /
• pp.27-34
• /
• 2019

This study explores the emergence of a modern form of Cheongju-eup townscape in the late 1930s by re-examining the 1960s restoration model of Seongan-dong and Jungang-dong in Cheongju, one of the historic cities in South Korea. According to the acquired data from the restoration model, it is found that the construction of a new urban area during the late 1930 was resulted from the following events: the development of a railroad station located outside of the north gate of Cheongju-eup since 1921, the completion of Musimcheon embankment outside the south gate in 1932, and the construction of Chungcheongbuk provincial office outside the eastern gate in 1937. In this period of development, which the author named 'Cheongju-eup period', the streets in the old castle, consisting only of two-story financial buildings, had been expanded from the existing area at the Seongan-gil intersection to the outside the east gate of Cheongju-eup. In addition, public government buildings, which were mainly located in both Seongan-gil and Yulgok-ro in the east-west direction, were newly constructed during the late 1930s in Seokgyo-dong, a new area in which a large number of commercial buildings including department stores, clothing stores, shoes shops, and watch stores were also built along the streets. Moreover, the modern form of Cheongju-eup was to be formed by several construction projects in the area of Jungang-ro in the late 1930s. Until the 1920s, the townscape outside the northern gate of Cheongju-eup, were composed of primary, agricultural, and female schools built on a largest site of Gyoseo-ro and Daeseong-ro as well as a transportation warehouse and a railway office near the Cheongju station. Then, entering the 1930s, new school buildings and domestic industrial shops and factories were built around the area of Jungang-ro ranging from the railway outside the northern gate to Bangadari. As a result, the expansion of townscape with newly constructed buildings in the late 1930s marked the emergence of a modern form of Cheongju-eup.

• Journal of Regulation Studies
• /
• v.27 no.1
• /
• pp.153-188
• /
• 2018

This paper reviews the literature regarding exclusive territory restraint and encroachment and compares the development of related policies in the United States, the European Union, and South Korea. Furthermore, using coffee franchise industry data in South Korea, this paper analyzes the effects of the exclusive territory restraint on entry and exit of coffee shops. The results show that the growth rates of regulated brands' entry have stagnated during the implementation period of the KFTC's Franchising Best Practice Code. Moreover, the exit rates of coffee shops in two years after its entry decreased under the Best Practice Code and the revised Franchise Law.

• Safety and Health at Work
• /
• v.7 no.4
• /
• pp.389-393
• /
• 2016

Job hazard analyses were conducted to assess exposure to musculoskeletal disorder (MSD) risk factors in seven workers of three dry-cleaning establishments. In accordance with the Washington State Ergonomics Rule, the analyses were performed in two separate steps: (1) observation and checklist approaches were made to identify a "caution zone job" in the seven workers' pressing operations across the three shops; and (2) detailed posture and motion analyses were undertaken to determine a "MSD hazard" in one worker's operation using a video technique. One "caution zone job" was identified and it was the pressing operation job in which five physical risk factors were found in the pressing operations. The detailed analyses confirmed that one "MSD hazard", i.e., awkward posture in shoulders, was prevalent in the pressing operations of the three dry-cleaning facilities. It would be desirable to reduce MSD risk factors including awkward shoulder posture in the dry-cleaning industry.

• Food Science of Animal Resources
• /
• v.38 no.4
• /
• pp.759-767
• /
• 2018

The concern about the possibility of food can be a vehicle for the transmission of Clostridium difficile to humans has been raised recently due to the similarities among the strains isolated from patients, foods and food animals. In this study, therefore, the prevalence of C. difficile was investigated in beef and chicken meat products collected from 57 different butcher shops, markets and fast food restaurants in Sakarya province of Turkey. Two out of 101 samples (1.98%) was positive for C. difficile indicating a very low prevalence. The pathogen was isolated from an uncooked meatball sample and a cooked meat $d{\ddot{o}}ner$ sample, whereas not detected in chicken meat samples. The meatball isolate was resistant to vancomycin and tetracycline, while the cooked meat $d{\ddot{o}}ner$ isolate was resistant to vancomycin and metronidazole. Both isolates were sensitive to moxifloxacin and clindamycin. Toxins A and B were not detected. This study reveals the presence of C. difficile in further processed beef products in Turkey.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.2
• /
• pp.123-131
• /
• 2018

Air transport industry tries to enhance punctuality, stability and amenity for customer's satisfaction. Especially airlines and airports do make an effort as the distance between these two stakeholders and passengers are close. This research has empirically discussed the relationship between duty free shop purchase of passengers and the number of flights and hours of schedule delay at the airport. According to the result, the total sales of duty free shop sales have meaningful influence on the number of flights and hours of delay. In order to decrease such an impact, close cooperation between airports and duty free shops required.

• Journal of Korea Foundry Society
• /
• v.20 no.3
• /
• pp.181-187
• /
• 2000

There are two types of vacuum die casting, one is known as the chill block method, and the other is the valve block method. Efficiency of the valve block method is better than the chill block method. However purchasing and maintaining cost of the former one is very high, the latter method is popular in many small and medium die casting shops. Simple evacuation system using chill vent was prepared to investigate the effect of the air pressure, hose length and chill vent type on the pressure change in die cavity in this study. The rate of evacuation was influenced by the evacuation method, chill vent condition and hose length. Evacuation time became longer and vacuum level lower when evacuating cavity via chill vent. It took a longer time to evacuate the cavity when a longer hose was used. Vacuum level in the cavity also decreased with increase in hose length.

• Journal of Distribution Research
• /
• v.4 no.1
• /
• pp.1-16
• /
• 1999

Although many studies have emphasized the importance of a saleperson's effort in the area of service marketing, no one has studied the variables which may influence, or may be influenced by salesperson's effort by customers. This study investigates the effects of percieved salesperson's effort on some performance variables and the effects of some selected variables on perceived salesperson's effort. Two sets of data were collected - one on the service of beauty hair shops and the other on that in fast food restaurants. The results indicate that empathy of employees is positively related to perceived effort, and perceived effort has the positive effects on satisfaction, trust, and long term relationship. However, the relationships between store image and perceived effort, and that between trust and long term relationship are only partly supported and the effects of perceived effort on long term relationship are not supported in our empirical tests.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.3
• /
• pp.192-200
• /
• 1998

Even though most die-maker are using CAD/CAM systems rout NC tool-path generation, “front-end”CAD/CAM technologies have not been fully adapted to sculptured surface machining(SSM) nor are sufficiently utilized in die shops. This gap between die-making industry and CAD/CAM community persists mainly because of the lack of a SSM-process model through which the two groups communicate with each other. Proposed in this paper is a model of SSM-processes which is built around the concepts of machining stages, unit machining operations, and each machining stage is decomposed into a sequence of unit machining operations(UMOs). Identified in the paper are five machining stages and 17 types of UMO. Based on the framework of the proposed model, an example of inner-panel stamping-die machining processes is described in detail.

• Asia-Pacific Journal of Business
• /
• v.6 no.1
• /
• pp.45-57
• /
• 2015

The purpose of this research is to explore the relationships among service quality's five factors(i.e., tangibles, reliability, responsiveness, empathy, and assurance) and customer satisfaction. The study used convenience sampling and selected certain consumers who visited coffee shop in BeiJing, China. Total 300 questionnaires was distributed and 18 unsuitable data were excluded for data analysis. These data were tested using SPSS 21.0. The results of this study are summarized as follows. First, the result of the relationship between coffee shops'service quality and customer satisfaction reveals that two of 5 service quality factors (i.e., assurance and empathy) had a positive effect on customer satisfaction only, and other service quality factors (i.e., tangibles, reliability, and responsiveness) had no positive influence on customer satisfaction. Limitations and future research directions of the study were also discussed.

• The Research Journal of the Costume Culture
• /
• v.10 no.6
• /
• pp.666-679
• /
• 2002

The purpose of the present study was to analyze clothing shopping orientation and impulsive purchase behavior for clothing by using adolescents. Data were collected through a self-administered questionnaire survey from 680 middle and high school students living in Gangrung area from July 2 to July 6, 2001; 582 were used for the data analysis. Data were analyzed by chi-square analysis, 1-test, ANOVA, descriptive statistics, cluster analysis and Duncan's multiple range test. The results showed significant differences in clothing shopping orientation and in the impulsive shopping factors for clothing among the groups determined by demographic characteristics and, in the impulsive shopping factors for clothing among groups determined by the shopping orientation. Female students and high school students showed higher tendencies of recent experiences of impulsive buying for clothing. More thin half of the subjects tended to spend less than 30,000 won and to buy two items each time when purchasing clothing impulsively. Most students used discount shops or specialized stores fur impulsive purchase.