• Journal of Electrical Engineering and Technology
• /
• 제3권2호
• /
• pp.243-253
• /
• 2008

This paper deals with the analysis, design, and implementation of a single phase AC-DC Zeta converter with high frequency transformer isolation and power factor correction(PFC) in two modes of operation, discontinuous current mode of operation(DCM), and continuous current mode of operation(CCM). A Digital Signal Processor(DSP) based implementation is carried out for validation of the Zeta converter developed design in discontinuous mode of operation. A comparison of both modes of operation is presented for a 1kW power rating from the point of view of steady state and dynamic behavior, power quality, simplicity, control technique, device rating, and converter size. The experimental results of a developed prototype of Zeta converter are presented for validation of the developed design. It is observed that CCM is most suitable for higher power applications where it requires some complex control and sensing of the additional variables.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1365-1367
• /
• 2003

A new method, called dynamic space projection method that is suitable to remote sensing image, is adopted to encrypt GCP (ground control point) datum in this paper. The essence of this method is to encrypt enough GCP by using a few known GCP in order to realize the precise correction of remote sensing image. By making use of the method to the GCP datum encrypting and precise geometric correction of TM image and SPOT image, the precision of encrypted GCP is less than one pixel, the precision of precisely corrected image is less than two pixels.

• 한국정보통신학회논문지
• /
• 제19권10호
• /
• pp.2341-2349
• /
• 2015

부동소수점 나눗셈에서 많이 사용하는 골드스미트 부동소수점 나눗셈 알고리즘은 한 회 반복에 두 번의 곱셈을 수행한다. 본 논문에서는 한 회 반복에 K 번 곱셈을 수행하는 가칭 오차 교정 K차 골드스미트 부동소수점 나눗셈 알고리즘을 제안한다. 본 논문에서 제안한 알고리즘은 입력 값에 따라서 곱셈 횟수가 다르므로, 평균 곱셈 횟수를 계산하는 방식을 유도하고, 여러 크기의 근사 역수 테이블에서 단정도실수 및 배정도실수의 나눗셈 계산에 필요한 평균 곱셈 횟수를 계산한다. 또한 한 번의 곱셈과 판정으로 나눗셈 결과를 보정하는 알고리즘을 제안한다. 본 논문에서 제안한 알고리즘은 오차가 일정한 값보다 작아질 때까지만 반복 연산을 수행하므로 나눗셈 계산기의 성능을 높일 수 있다. 또한 최적의 근사 테이블을 구성할 수 있다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.377-381
• /
• 2006

A seismic survey for gas hydrate have performed over the East sea by the KIGAM since 1997. General indicator of gas hydrate in seismic data is commonly inferred from the BSR(Bottom Simulating Reflector) that occurred parallel to the sea floor, amplitude decrease at the top of the BSR, amplitude blanking at the bottom of the BSR, decrease of the interval velocity and the reflection phase reversal at the BSR. In this paper we had analyzed optimum parameters of the field data to detect the 9as hydrate. Shot delay correction is applied 95ms, spherical divergence correction is applied velocity library 3, bandpass filter is applied 25-30-115-120Hz deconvolution operator length is applied 60ms, lag is 6ms and accurate velocity analysis NMO correction, stack is performed. Geobit 2.11.0 developed by the KIGAM was used for all data processing. Processing results say that the BSR occurred parallel to the sea floor were shown at 3,150m/s of two way travel time from the sea floor through shot point 5,000-5,610, and identified the interval velocity decrease around BSR and the reflection phase reversal corresponding to the reflection at the sea floor.

• 한국의학물리학회지:의학물리
• /
• 제31권4호
• /
• pp.189-193
• /
• 2020

An MR-based attenuation correction (MRAC) map plays an important role in quantitative positron emission tomography (PET) image evaluation in PET/magnetic resonance imaging (MRI) systems. However, the MRAC map is affected by the magnetic field inhomogeneity of MRIs. This study aims to evaluate the characteristics of MRAC maps of physical phantoms on PET/MRI images. Phantom measurements were performed using the Siemens Biograph mMR. The modular type physical phantoms that provide assembly versatility for phantom construction were scanned in a four-channel Body Matrix coil. The MRAC map was generated using the two-point Dixon-based segmentation method for whole-body imaging. The modular phantoms were scanned in compact and non-compact assembly configurations. In addition, the phantoms were scanned repeatedly to generate MRAC maps. The acquired MRAC maps show differently assigned values for void areas. An incorrect assignment of a void area was shown on a locally compact space between phantoms. The assigned MRAC values were distorted using a wide field-of-view (FOV). The MRAC values also differed after repeated scans. However, the erroneous MRAC values appeared outside of phantom, except for a large FOV. The MRAC map of the phantom was affected by phantom configuration and the number of scans. A quantitative study using a phantom in a PET/MRI system should be performed after evaluation of the MRAC map characteristics.

• Journal of Chest Surgery
• /
• 제16권2호
• /
• pp.157-163
• /
• 1983

Ebstein's anomaly is a rare congenital cardiac malformation oand the ideal surgical correction seems controversial at present, and some problems are left unsolved in the surgical correction of this anomaly. Between June 1978 and June 1982, 12 patients with Ebsteins' anomaly underwent corrective open heart surgery at Seoul National University Hospital. Except for one patient, who had no ASD, all had a huge right atrium, secundum type ASD, and definite atrialized right ventricle. Typically, displaced tricuspid valve leaflets were found in all cases, but the degree of displacement and deformity were variable. In the point of NYHA functional classification, five were in class II, six were in class III, and one was in class IV. Ten patients were operated on by tricuspid valve replacement and pication. Two patients were operated on only by plication and annuloplasty techniques, and in all cases, ASD was closed. Postoperatively, four patients suffered from complete A-V block, and two of them died immediately. The remaining two patients took pacemaker generator implantation with good results. The other eight patients were in good condition. Tricuspid valve replacement using tissue valve and plication of the atrialized rght ventricle seems to be a good method of surgical correction for Ebstein's anomaly.

• Journal of Korean Dental Science
• /
• 제13권1호
• /
• pp.28-34
• /
• 2020

Purpose: The purpose of this study was to investigate the influence of different implant computer software on the accuracy of image registration between radiographic and optical scan data. Materials and Methods: Cone-beam computed tomography and optical scan data of a partially edentulous jaw were collected and transferred to three different computer softwares: Blue Sky Plan (Blue Sky Bio), Implant Studio (3M Shape), and Geomagic DesignX (3D systems). In each software, the two image sets were aligned using a point-based automatic image registration algorithm. Image matching error was evaluated by measuring the linear discrepancies between the two images at the anterior and posterior area in the direction of the x-, y-, and z-axes. Kruskal-Wallis test and a post hoc Mann-Whitney U-test with Bonferroni correction were used for statistical analyses. The significance level was set at 0.05. Result: Overall discrepancy values ranged from 0.08 to 0.30 ㎛. The image registration accuracy among the software was significantly different in the x- and z-axes (P=0.009 and <0.001, respectively), but not different in the y-axis (P=0.064). Conclusion: The image registration accuracy performed by a point-based automatic image matching could be different depending on the computer software used.

• 대한전자공학회논문지SD
• /
• 제46권6호
• /
• pp.31-38
• /
• 2009

휴대용 기기의 소비 전력을 낮추고 영상의 질을 개선하기 위해, 주변 밝기에 따라서 LCD 모듈의 백라이트를 조정하는 방법을 사용할 수 있다. 이를 효과적으로 구현하기 위해서 LCD 패널에 광 센서와 신호취득 회로를 집적하고자 했으며, LTPS TFT 공정을 이용하여 설계했다. 서로 다른 LCD 패널의 광 센서에 대한 특성 편차를 보정하기 위해 새로운 개념의 start-up 보정 방식을 제안하였다. 이와 더불어 광 전류 정보를 디지털 형태로 전달하기 위해 time-to-digital 방식을 사용하였으며, 이를 start-up 보정 방식과 효과적으로 결합하는 dual slope 보정 방법을 제안하였다. LTPS TFT 공정을 이용하여 최종적인 신호취득 회로를 구현하고자, 간단하고 안정적인 회로 구조와 타이밍을 제안하고 설계 및 검증을 진행했다. 설계한 신호취득 회로는 별도의 검사 설비 없이 광 센서 편차의 보정이 가능하며, 60dB 범위의 입력 광에 대해 10배수 구간 마다 4 단계의 디지털 데이터를 출력한다. 신호취득 속도는 100Hz이며, 디지털 변환의 선형 오차는 18% 미만이다.

• 한국의학물리학회지:의학물리
• /
• 제2권2호
• /
• pp.183-192
• /
• 1991

형광 안저 사진은 형광 물질을 정맥에 주사한 후 안저를 연속 촬영한 것으로 이로부터 망막 및 맥락막의 혈관 상태를 관찰하여 안과계 질환 뿐만아니라, 당뇨병, 고혈압 등 내과계 질병도 진단한다. 순차적으로 안저 사진을 촬영할 때 안구의 불규칙적인 운동으로 인하여 프레임마다 특정 영역의 위치가 달라질 수 있으며, 조명 상태의 변동에 의해 프레임마다 배경 명암이 달라질 수 있다. 이러한 형광 안저 사진에서 프레임간 변화분을 검출하기 위해 직접 두 프레임을 빼는 것은 부적합하다. 본 논문에서는 형광 안저 사진의 프레임간 변화분을 정확하게 검출할 수 있도록 형광안저 사진의 기하 왜곡을 교정하는 방법을 제안한다. 먼저 안저 사진으로부터 혈관을 검출하고 이를 세선화하여 제어점의 좌표를 정한다. 제어점을 이용하여 기하 변환함수를 구하고 각 프레임을 맵핑하므로써 기하 왜곡을 교정한다. 기하 왜곡을 교정한 두 프레임을 화소별로 빼어 차영상을 구한 결과 프레임간 변화를 정확하게 검출할 수 있었다.

• 한국안광학회지
• /
• 제7권1호
• /
• pp.63-67
• /
• 2002

본 논문에서는 기존에 설계되어진 meniscus negative outer element를 이용한 광각을 담당하는 렌즈계를 선택하여 광학적 성능을 분석하였다. 본 광학계의 특성은 오직 하나의 outer negative element만을 갖는 구조로 넓은 시야를 제공하고, 두 개의 면을 비구면화함으로서 수차보정을 하여 렌즈 사용량을 줄여 소형화와 경량화의 장점을 살린 compact한 광학계라고 할 수 있겠다. 또한 수차보정에 사용된 2개의 비구면의 형태를 조사함으로써 비구면의 수차보정 특성을 알아보았다.