• 품질경영학회지
• /
• 제47권4호
• /
• pp.823-835
• /
• 2019

Purpose: This study deals with a production planning and scheduling problem to minimize the total weighted tardiness on hybrid flow shop with sets of non-identical parallel machines on stages, where parallel machines in the set are dedicated to perform specific subsets of jobs and sequence-dependent setup times are also considered. Methods: A two-stage approach, that applies MILP model in the 1st stage and dispatching rules in the 2nd stage, is proposed in this paper. The MILP model is used to assign jobs to a specific machine in order to equalize the workload of the machines at each stage, while new dispatching rules are proposed and applied to sequence jobs in the queue at each stage. Results: The proposed two-stage approach was implemented by using a commercial MILP solver and a commercial simulation software and a case study was developed based on the spark plug manufacturing process, which is an automotive component, and verified using the company's actual production history. The computational experiment shows that it can reduce the tardiness when used in conjunction with the dispatching rule. Conclusion: This proposed two-stage approach can be used for HFS systems with dedicated machines, which can be evaluated in terms of tardiness and makespan. The method is expected to be used for the aggregated production planning or shop floor-level production scheduling.

• Steel and Composite Structures
• /
• 제28권5호
• /
• pp.541-557
• /
• 2018

This paper presents the influence of carbon nanotubes (CNTs) waviness and aspect ratio on the vibrational behavior of functionally graded nanocomposite sandwich annular sector plates resting on two-parameter elastic foundations. The carbon nanotube-reinforced (CNTR) sandwich plate has smooth variation of CNT fraction along the thickness direction. The distributions of CNTs are considered functionally graded (FG) or uniform along the thickness and their mechanical properties are estimated by an extended rule of mixture. In this study, the classical theory concerning the mechanical efficiency of a matrix embedding finite length fibers has been modified by introducing the tube-to-tube random contact, which explicitly accounts for the progressive reduction of the tubes' effective aspect ratio as the filler content increases. Effects of CNT distribution, volume fraction, aspect ratio and waviness, and also effects of Pasternak's elastic foundation coefficients, sandwich plate thickness, face sheets thickness and plate aspect ratio are investigated on the free vibration of the sandwich plates with wavy CNT-reinforced face sheets. The study is carried out based on three-dimensional theory of elasticity and in contrary to two-dimensional theories, such as classical, the first- and the higher-order shear deformation plate theories, this approach does not neglect transverse normal deformations. The sandwich annular sector plate is assumed to be simply supported in the radial edges while any arbitrary boundary conditions are applied to the other two circular edges including simply supported, clamped and free.

• Water Engineering Research
• /
• 제3권1호
• /
• pp.57-62
• /
• 2002

This research is intended to integrate long-term operation rules and real time operation policy for conservation & flood control in a reservoir. The familiar Yield model has been modified and used to provide long-term rule curves. The model employs linear programming technique under given physical conditions, i.e., total capacity, dead storage, spillways, outlet capacity and their respective elevations to find required and desired minimum storage fur different demands. To investigate the system behavior resulting from the above-mentioned operating policy, i.e., the rule curves, the simulation model was used. Results of the simulation model show that the results of the optimization model are indeed valid. After confirmation of the above mentioned rule curves by the simulation models, gate operation procedure was merged with the long term operation rules to determine the optimum reservoir operating policy. In the gate operation procedure, operating policy in downstream flood plain, i.e., determination of damaging and non-damaging discharges in flood plain, peak floods, which could be routed by reservoir, are determined. Also outflow hydrograph and variations of water surface levels for two known hydrographs are determined. To examine efficiency of the above-mentioned models and their ability in determining the optimum operation policy, Esteghlal reservoir in Iran was analyzed as a case study. A numerical model fur the solution of two-dimensional dam break problems using fractional step method is developed on unstructured grid. The model is based on second-order Weighted Averaged Flux(WAF) scheme with HLLC approximate Riemann solver. To control the nonphysical oscillations associated with second-order accuracy, TVD scheme with SUPERBEE limiter is used. The developed model is verified by comparing the computational solutions with analytic solutions in idealized test cases. Very good agreements have been achieved in the verifications.

• Journal of Magnetics
• /
• 제13권3호
• /
• pp.85-87
• /
• 2008

I report a simple method to correct the saturation effect in absorption spectra measured in total electron yield (TEY) mode. It does not require additional measurements of the X-ray penetration depth. In order to check the reliability of the method, X-ray magnetic circular dichroism (XMCD) spectra for polycrystalline Fe were measured at two different incident angles, and then processed with the method. The two resultant XMCD spectra were identical, and their sum rule analysis produced the ratios of orbital magnetic moment to spin magnetic moment, which were very close to the well-known value.

• 수산해양기술연구
• /
• 제51권2호
• /
• pp.203-211
• /
• 2015

The purpose of this study is to identify the flow resistance of the bottom pair trawl nets. The bottom pair trawl nets being used in fishing vessel (100G/T, 550ps) was selected as a full-scale net, and 1/10, 1/25 and 1/50 of the model nets were made. Converted into the full-scale net by Tauti's modeling rule and Kim's modeling rule, when resistance coefficient k of each net was calculated by substituting into above equation for flow resistance R and wall area of nets S values of each net ${\upsilon}$. Because resistant coefficient k decreases exponentially according as flow velocity ${\upsilon}$ increases to make $k=c{\upsilon}^{-m}$, c and m values of each net were compared. As a result, as the model was smaller, c and m values was smaller in the two rule into standard of 1/10 model value, decrease degree of 1/25 model was almost same in the two rule, decrease degree of 1/50 model was very big in Tauti's modeling rule. Therefore, in the result of experiment, because average of c and m values for similarly 1/10 and 1/25 model were given $c=4.9(kgf{\cdot}s^2/m^4)$ and m=0.45, R (kgf) of bottom pair trawl net could show $R=4.9S{\upsilon}^{1.55}$ using these values. As in the order of cod-end, wing and bag part for 1/25 and 1/50 model net were removed in turn, measured flow resistance of each, converted into the full-scale, total resistance of the net and the resistance of each part net were calculated. The resistance ratio of each part for total net was not same in 1/25 and 1/50 model each other, but average of two nets was perfectly same area ratio of each part as the wing, bag and cod-end part was 43%, 45% and 12%. However, the resistance of each part divided area of the part, calculated the resistance of per unit area, wing and bag part were not big difference each other, while the resistance of cod-end part was very large.

• 산업경영시스템학회지
• /
• 제38권1호
• /
• pp.74-82
• /
• 2015

Two key challenges in statistical relational learning are uncertainty and complexity. Standard frameworks for handling uncertainty are probability and first-order logic respectively. A Markov logic network (MLN) is a first-order knowledge base with weights attached to each formula and is suitable for classification of dataset which have variables correlated with each other. But we need domain knowledge to construct first-order logics and a computational complexity problem arises when calculating weights of first-order logics. To overcome these problems we suggest a method to generate first-order logics and learn weights using association analysis in this study.

• 한국인터넷방송통신학회논문지
• /
• 제21권3호
• /
• pp.67-72
• /
• 2021

연관규칙 마이닝은 여러 테이블에 숨겨진 패턴들의 관계를 나타내주는 방법이다. 요즈음에는 연관규칙 마이닝에 보다 세부적인 의미를 추가하기 위하여 과립화 논리를 이용하고 있다. 또한 기존의 데이터를 이용하여 추천하는 기존의 시스템과는 달리 과립화 연관규칙에서는 신규 가입자나 신규상품에 대한 추천의 경우도 가능하다. 따라서 연관규칙의 과립화의 정성적인 크기를 결정하는 것이 추천 시스템의 성능을 좌우한다. 본 논문에서는 관람자가 평가한 영화에 대한 관계를 파악하기 위하여 퍼지논리와 샤논 엔트로피 개념을 이용하여 관람자와 영화데이터에 대한 과립화 방법을 제안한다. 연구는 관람자와 영화간의 연관규칙의 함의에 결정적인 역할을 하는 데이터의 과립화의 크기를 결정하는 부분과 이러한 과립화를 이용하여 관람자와 영화간의 연관규칙을 추출하는 두 번째 부분으로 구성되어 있으며 넷플릭스의 MovieLens데이터를 이용하여 분석하였다. 최종적으로 도출된 연관규칙의 의미와 추천의 정확도 및 고려해야하는 함의를 제시하였다.

• 한국응급구조학회지
• /
• 제26권2호
• /
• pp.7-18
• /
• 2022

Purpose: This study aimed to develop a pre-hospital subarachnoid hemorrhage (SAH) prediction tool by analyzing the extant predictive factors of patients with non-traumatic SAH who visited the hospital through the 119 emergency medical services. Methods: We retrospectively reviewed pre-hospital care reports (PCRs) and electronic medical records (EMRs) of 103 patients with non-traumatic SAH who were transported to the emergency department of two national hospitals via the 119 emergency medical service from January 1, 2017 to December 31, 2020. Variables required to apply the Ottawa SAH Rule and EMERALD SAH Rule, which are early prediction tools for SAH, were extracted and applied. Results: The most common symptoms-which were found in 94.1% and 97.0% of all patients according to PCRs and EMRs, respectively-appeared in the following order: headache, altered state of consciousness, and nausea/vomiting. When the variables used for the EMERALD Rule, namely systolic blood pressure (SBP), diastolic blood pressure (DBP), and blood sugar test (BST), were applied, the sensitivities of EMR and PCRs were 99.9% and 92.2%, respectively. Conclusion: For the timely prediction of SAH at the pre-hospital phase, patient age and symptoms should be assessed, and SBP, DBP, and BST should be measured to transport the patient to an appropriate hospital.

• 전기학회논문지
• /
• 제67권3호
• /
• pp.419-426
• /
• 2018

An useful and effective design method for the gas identification system is presented in this paper. The proposed gas identification system adopts hierarchical structure with two level rule base combining fuzzy sets with rough sets. At first, a hybrid genetic algorithm is used in grouping the array sensors of which the measured patterns are similar in order to reduce the dimensionality of patterns to be analyzed and to make rule construction easy and simple. Next, for low level identification, fuzzy inference systems for each divided group are designed by using TSK fuzzy rule, which allow handling the drift and the uncertainty of sensor data effectively. Finally, rough set theory is applied to derive the identification rules at high level which reflect the identification characteristics of each divided group. Thus, the proposed method is able to accomplish effectively dimensionality reduction as well as accurate gas identification. In simulation, we demonstrated the effectiveness of the proposed methods by identifying five types of gases.

• 한국화재소방학회논문지
• /
• 제16권2호
• /
• pp.27-32
• /
• 2002

오늘날 건축물이 대형화, 고층화, 복합화 되어 가고 있으며, 그로 인한 화재발생 형태도 대형화 복잡 다양한 양상을 띠고 있다. 하지만 우리나라의 화재시 인명안전과 관련된 법제도적인 체계가 단일 법규정에 의존하기보다는 건축법과 소방법으로 양분되어 있으며, 현행 법규정 및 관련 기준도 화재시 충분한 안전성능을 확보하기에 미흡한 실정이다. 본 연구는 우리나라를 비롯한 미국, 일본, 영국 등 각 국에서의 화재시 피난안전에 관한 규정의 현황을 비교함과 동시에 합리적인 피난안전 기준을 위한 자료를 조사·분석하였다. 이를 근거로 화재시 재실자의 안전한 피난을 위한 현행 기준의 문제점을 도출하고, 개선방안을 도출하였다.