A gas chromatography/mass spectrometric (GC/MS) method was developed as a candidate reference method for the accurate determination of essential fatty acids (linoleic acid, ${\alpha}$- and ${\gamma}$-linolenic acids) in food supplemental oil products. Samples were spiked with three internal standards (stearic acid-$d_{35}$, $^{13}C_{18}$-linoleic acid, and $^{13}C_{18}$-${\alpha}$-linolenic acid). Samples were then subject to saponification, derivatization for methylation, and extraction by organic solvent. For GC/MS measurement, an Agilent HP-88 column, designed for the separation of fatty acid methyl esters, was selected after comparing with other columns as it provided better separation for target analytes. Target analytes and internal standards were detected by selected ion monitoring of molecular ions of their methyl ester forms. The GC/MS method was applied for the measurement of three botanical oils in NIST SRM 3274 (borage oil, evening primrose oil, and flax oil), and measurement results agreed with the certified values. Measurement results for target analytes which have corresponding isotope-labeled analogues as internal standard were calculated based on isotope dilution mass spectrometry (IDMS) approach, and compared with results calculated by using the other two internal standards. Results from the IDMS approach and the typical internal standard approach were in good agreement within their measurement uncertainties. It proves that the developed GC/MS method can provide similar metrological quality with IDMS methods for the measurement of fatty acids in natural oil samples if a proper fatty acid is used as an internal standard.
어류근육속에 포함된 nonylphenol(NP), octylphenol(OP), bis(2-ethylhexyl)phtalate(BEHP)의 동시 정량방법을 1-phenyldecanol(PD)과 bis(2-ethylbutyl)phthalate(BEBP) 2가지 내부표준물질을 이용하여 연구하였다. 1-phenyldecanol은 nonyphenol과 octylphenol을 정량하고, bis(2-ethylbutyl)phthalate는 bis(2-ethylhexyl)phthalate를 정량하기 위해 사용하였다. NP와 OP의 경우 $0.2{\sim}20{\mu}g/g$ 농도범위에서 75% 이상의 회수율을 나타냈으며, BEHP는 $0.4{\sim}40{\mu}g/g$ 농도범위에서 102% 이상의 회수율을 보였다. 시료를 밀폐된 배양시험관에서 이염화메탄을 이용하여 추출하고 용매를 이소-헥산으로 바꾸고 aminopropyl 칼럼(2g)을 이용하여 분리한후 GC/MS-SIM 방법으로 분석하였다. 확립된 분석방법을 11점의 한국시료와 3점의 영국시료에 적용하였다. Nonylphenol은 2점의 한국어류시료에서, BEHP는 9점의 한국어류시료에서 검출되었고, 그 농도범위는 각각 $0.02{\sim}0.06{\mu}g/g$과 $0.18{\sim}2.03{\mu}g/g$이었다. 그러나 영국어류시료에서는 단 1점의 시료에서 BEHP가 검출되었고 그 농도는 $2.99{\mu}g/g$이었다. 이 방법에 의해서 octylphenol은 어떠한 시료에서도 검출되지 않았으며, 이와 같이 2가지 내부표준물질을 이용하는 방법은 각기 다른 특성을 갖는 분석대상물질에 각각의 특성과 유사한 내부표준물질의 사용으로 매우 적은량의 생체 시료에서 보다 정확한 정량이 가능하였다.
HAZAEA, Saddam A.;TABASH, Mosab I.;KHATIB, Saleh F.A.;ZHU, Jinyu;AL-KUHALI, Ahmed A.
The Journal of Asian Finance, Economics and Business
/
제7권11호
/
pp.867-875
/
2020
Quality internal audit (IA) plays a crucial role in accountability, transparency and preserving public properties. This paper gives a brief background of the IA system in Yemen and examines its impact with regards to financial performance in Yemeni commercial banks based on five factors: (i) independence of IAs, (ii) adherence to IA standards, (iii) governance principles implementation, (iv) size of the IA, and (v) frequency of internal audits committees' meetings. The primary data for the study were collected through a questionnaire prepared for this purpose. Fifty questionnaires were distributed out of which forty-two were retrieved and valid in the analysis process. For the empirical analysis, descriptive analysis and T-test were used for verification of the research hypotheses. Results revealed that sticking to standards internal audit, internal auditors' independence and quality governance have significant impact on banks' financial performance, while the size of internal audits committees, as well as their meeting, frequently has insignificant positive impact on banks' performance. Moreover, the country results show that the use of automated internal audit in banks has an impact on improving financial performance. This article provides avenues for further studies, mainly in developing countries, including Yemen, in quality internal audit and financial performance.
In this study, various techniques for measurement and analysis of PAHs in the ambient air were verified in order to select a more reliable method. Sampling and analysis of PAHs were done by the EPA TO-13a method. QA/QC of the measurement was conducted to minimize errors in sampling and analyzing processes. The linearity of calibration curve of the PAH standards was good ($R^2{\geq}0.99$). Audit accuracy was evaluated using 5 internal standards of PAHs ($Naphthalene-d_8,\;Acenaphthene-d_{10},\;Phenanthrene-d_{10},\;Chrysene-d_{12},\;Perylene-d_{12}$). Relative standard deviations of the internal standard of the PAHs were ranged from 6.22% for $acenaphthene-d_{10}$ to 8.11% for $chrysene-d_{12}$. To evaluate the surrogate recoveries, two field surrogate standards of PAHs ($fluoranthene-d_{10},\;benzo(a)pyrene-d_{12}$) and two extract surrogate standards of the PAHs ($fluorene-d_{10},\;pyrene-d_{12}$) were spiked into all samples before field sampling and sample extraction, respectively. Recoveries of field the surrogate standards ranged from $80.4{\pm}12.2%$ for $fluoranthene-d_{10}$ to $66.2{\pm}12.8%$ for $benzo(a)pyrene-d_{12}$. Extraction recoveries of the surrogate standards ranged from $70.4{\pm}10.2%$ for $fluorene-d_{10}$ to $77.6{\pm}10.8%$ for $pyrene-d_{10}$. The detection limit of benzo(a)pyrene among 16 PAHs standards for quantitation was 20 pg.
The Journal of Asian Finance, Economics and Business
/
제7권12호
/
pp.423-431
/
2020
This study examines the cost and benefit (i.e., income) of the Forest Stewardship Council (FSC) rubber plantations in Thailand. The study attempts to identify the challenges to the implementation of FSC standards in rubber plantations in the country. A total of 60 rubber farmers in two Southern provinces, namely, Songkhla and Rayong, were interviewed through a standardized questionnaire to gather primary data. The study found that small-, medium- and large-sized FSC rubber plantations were worth investing in. All sizes of rubber plantations had similar values of benefit cost ratio (BCR). It was also found that the values of the discount payback period (DPP) of the three forms of FSC rubber plantations were 9-12 years, while the large rubber plantations had the highest internal rate of return (IRR) (19.0%). It implies that the large-size plantations had the highest values. The rubber farmers in the study area reported that they are facing a number of problems and hardships in implementing FSC standards, lacking knowledge and understanding of FSC, especially for preparing documentation. Therefore, the Thai government should take proper policy initiatives to remove all the problems and barriers in implementing FSC standards for the sustainable rubber production in the country.
국내에서 제트팬 설치 간격 기준으로 사용되고 있는 일본도로공단 기준은 제트팬의 구경에 따라 설치간격을 제시하고 있지만 국제 상설도로 협회(PIARC)에서는 터널 직경에 10배를 유지할 것을 권장하고 있다. 이 기준들에 의해 결정된 설치 간격은 최대 약 2배 정도의 차이를 나타내고 있으며 이러한 설치 간격의 차이는 터널 환기 방식 선정에 불리한 요건으로 작용될 수 있기 때문에 터널 내부의 기류분석을 통한 적정 설치 간격 기준이 필요하다. 본 논문에서는 Froude 상사이론에 기초하여 아크릴 재질의 축소비 1/40의 모형 터널(직경 215mm, 연장 6.9m)과 모형 제트팬(구경 26.3mm, 31.6mm)을 제작하여 터널 내부에서의 기류분석을 위해 터널연장을 따라서 압력과 속도의 변화를 측정하였고, 제트팬 가동시 제트팬 주위에서 외부 공기의 영향으로 발생될 수 있는 재유입 현상을 확인하기 위해서 제트팬 주변에서 압력변화를 측정하였다. 모형실험 결과에서는 터널 내부기류는 제트팬 구경에 영향을 받지 않고 터널직경에 약 9배 정도가 되는 지점에서 압력과 속도의 변화가 안정되는 것으로 나타났으며 제트팬이 가동되면서 발생되는 재유입 현상을 확인할 수 있었다. 이러한 결과를 통해 터널 내부에서의 제트팬 설치 시에는 터널 직경에 약9배 이상을 확보해야 한다고 판단된다.
The purpose of this study was to develop an evaluation tool for the quality of nursing care in abdominal surgery patient. The target subjects of the tool were adult patients having abdominal surgery under general anesthesia. Process-outcome framework was selected for the development of the tool in this study. The results were as follows. 1. Nine standards. 40 criteria and 88 indicators were developed. A standard was summary statement of the ideal level of excellencein a dimension of quality of nursing care. which could be evaluated by criteria. Several criteria indicated a specific standard and each criterion could be measured by observable and measurable indicators. 2. The standards were divided into two dimensions. One was process dimension which contained four standards(23 criteria), the other was outcome dimension which contatined five standards(17 criteria). 3. Average CVI was .985 at 9 standards. .947 at 40 criteria. and .987 at 88 indicators. 4. The evaluation tool for the quality of nursing care in abdminal surgery patients was a criterion-referenced tool. And data collection methods of the tool were investigation of patient's record and interview( or questionnaire) with the patients. 5. Interrater reliabilities of the tool were ; r= .7572 (agreement between two raters), and pI=.8487 (intraclass correlation between five raters who rated the 84 patients). 6. Internal consistency reliability ${\alpha}$ was .6194, which was obtained from 32 criteria. Eight criteria were missed in the analyzing process because of data omission. 7. Scores of the process and the outcome dimensions showed significant. but low correlation(r= .3759, p < .001). 8. There were significant differences in total scores between the hospitals and the departments of surgery(F = 15.233. p .0001). There was also significant interaction effect between hospitals and departments to total score(F = 8.396. p = .0001). Construct validity of the toool was verified by the known-group method. these kinds of difference were expected by the nursing experts participated in the study. From these results, more specific patient classification is suggested for the development of evaluation tool of the quallity of nursing care. And indicators to be used for objective measurement for the quality of nursing care must be developed.
Ahn, Byung Soo;Moon, Dong Min;Lee, Jin Bok;Kim, Jin Seog;Lee, Jin-Hong;Hong, Kiryong
분석과학
/
제33권2호
/
pp.68-75
/
2020
We have developed 10 μmol/mol nitrogen and oxygen certified reference materials (CRMs) in helium, as a SI-traceable gas standard for a quantifying of impurities in pure gases for the first time in Korea. The standard gas mixtures of nitrogen and oxygen were prepared in 5000 μmol/mol and sequentially were diluted to 250 μmol/mol and 10 μmol/mol according to the gravimetric preparation. In each dilution step, two cylinders of CRMs were prepared. The verification of internal consistency among the prepared gas mixtures was performed by using GC-TCD. The amount fractions and those expanded uncertainties (k = 2) of nitrogen and oxygen in the standard gas mixtures were (10.12 ± 0.08) μmol/mol and (10.18 ± 0.08) μmol/mol for nitrogen, and (9.88 ± 0.06) μmol/mol and (9.94 ± 0.06) μmol/mol for oxygen, respectively. We have conducted a purity assessment of two commercial helium gases using developed CRMs. As the results of the purity assessment, nitrogen and oxygen were detected by (1.66 ± 0.03) μmol/mol and (0.31 ± 0.02) μmol/mol, respectively, as the impurities in one of the pure helium.
The concept of Performance objective assessment is extended to wind engineering. This approach applies using the Database-Assisted Design technique, relying on the aerodynamic database provided by the National Institute of Standards and Technology (NIST). A structural model of a low-rise building is analyzed to obtain influence coefficients for internal forces and displacements. Combining these coefficients with time histories of pressure coefficients on the envelope produces time histories of load effects on the structure, for example knee and ridge bending moments, and eave lateral drift. The peak values of such effects are represented by an extreme-value Type I Distribution, which allows the estimation of the gust wind speed leading to the mean hourly extreme loading that cause specific performance objective compromises. Firstly a fully correlated wind field over large tributary areas is assumed and then relaxed to utilize the denser pressure tap data available but with considerably more computational effort. The performance objectives are determined in accordance with the limit state load combinations given in the ASCE 7-16 provisions, particularly the Load and Resistance Factor Design (LRFD) method. The procedure is then repeated for several wind directions and different dominant opening scenarios to determine the cases that produce performance objective criteria. Comparisons with two approaches in ASCE 7 are made.
To meet standards for high quality of care and satisfied customers, an evaluation tool about nursing care is necessary. And, We need to evaluate our practice continuously for the improvement in quality and outcomes. This study was intended to develop an evaluation tool about nursing care in NSICU, and was progressed of 3 steps; development, content validity verification and reliability verification. Data were obtained and analysed from Feb. To April, 2000. Development process of the study was as follows A preliminary list was made item by item on the basis of clinical Experience, literature review and patients' record review. Then the standards, criteria and indicators of preliminary evaluation tool were set by 5 clinical nursing panel, and their content validity was reviewed by 27 ICU nurses. Finally, an evaluation tool was developed and verified the reliability at c-university hospital located in Kwang-Ju. The results of this was as follows 1) The evaluation tool of this study developed 8 standards, 39 criterias and 106 indicators. The standards were divided into two dimensions. One was process dimension which contained 4 standards(26 criteria), The other was outcome dimension which contained 4 standards(13 criteria). 2) the Average content validity of the tool was 3.39 at standards, 3.55 at criteria and 3.51 at indicators. 3) Interrater reliability of the tool is r=.7993(p<.001) & internal consistency reliability ${\alpha}$ is .6031 4) Scores of NSICU Patients who participated in this study were 57 at total mean score, 58 at process mean score and 56 at outcome mean score The evaluation tool developed in this study seems to be useful in evaluation nursing practice appropriately for the improvement of nursing care in NSICU. I hope that this evaluation tool can be used effectively in NSICU as an intervention for the improvement of quality control.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.