• The Research Journal of the Costume Culture
• /
• v.10 no.5
• /
• pp.532-541
• /
• 2002

An empirical review on silk fabrics of the Chosun period showed that they varied in kind and design according to their uses. Thus the purpose of this study is to classify the fabrics into excavated and temple fabrics according to their uses and collected places and then to examine characteristics of each type. Excavated fabrics were most accounted for by tabby fabric, followed by satin, twill, leno and gauze and union cloth. Tabby fabric was most used throughout the Chosun period, followed by satin. This is supported by many literary records. Concerning excavated dresses of the same period, tabby fabric, especially Ju was the main material, followed by satin. Leno and gauze fabric was much less used than in the Koryo period. Among excavated dresses surveyed in this study, none was made of compound woven fabrics such as Brocade. Other excavation reports said that Brocade had been used for a cuff of coat in few cases, if any. Tabby fabric was widely used for both the right side and lining while twill and satin fabrics were mainly adapted to weave the right side because they had luster higher than the former, smooth sense of touching and unique designs.

• Journal of the Korean Home Economics Association
• /
• v.27 no.1
• /
• pp.1-8
• /
• 1989

In order to investigate the mechanical properties such as tensile, bending, shearing, thickness and weight of the wool fabrics were measured by KES-F system. Samples were classified into blend ratio, weave type, fabric count. Blend ratio was classified into two groups, which are P/W blended fabric (p=63~65%, w=35~37%) and all wool fabric. Weave type was classified into four groups, which are plain, 3 harness twill, 4harness twill, satin. Cloth count was classified into three groups, which are loose, medium, tight. Statistical analysis was performed using T-test, F-test. The results were as follows; 1. There was significant difference in the thickness, tensile, bending, shearing according to the blend ratio. 2. According the weave, there was significant difference in the bending, weight and thickness in the P/W blended fabrics. There was significant difference in the tensile, weight, thickness, bending, shearing, shearing hysterisis (2HG) in the all wool fabrics. 3. There was significant difference in the shearing properties according to the fabric count.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.10
• /
• pp.1390-1400
• /
• 2002

The purpose of this study is to categorize the type of fabrics and to analyze weaving method on the silk fabrics from ewongun's Tomb. The conclusions of this research are as follow. 1) Among the 26pieces of excavated clothes,98% of them were made of silk fabric and among them 84% used high-quality non-patterned silk I would assume, therefore, that the tomb was owned by a person who had a dignified yet humble tagte of higher society. 2) The weaving methods of textiles are plain weave, twil1 weave, satin weave. Plain weave includes spun silk tabby, fine filament silk tabby, raw silk tabby, thine silk tabby, damask on tabby, twill weave includes twill damask with different directions, satin weave includes non-patterned satin damask,5-end satin damask(4/1 warp faces ground, l/4 wok faced pattern). As the result of literature survey, I settled the names of textiles as follows; tabby was called Myunju, Saeju, Saengcho, and Sookcho according to the kind and density of silk threads used; Damask on tabby was ca]led Hwamunju) Twill damask was called Hwmunnung Satin damask was ca]led Hwamundan if they bear patterns by themselves or Mumundan if they don't have any patterns on them.

• Journal of the Korean Society of Costume
• /
• v.57 no.8
• /
• pp.37-47
• /
• 2007

This study is considered about the fabrics of the tomb of King Muryeong at the Baekje(百濟) Period. First, there were silk fabrics such as compound woven silk(錦), twill damask(綾), complex gause(羅) and plain weaved silk(平絹). All of compound woven silk(錦) are the warp-faced compound tabby(經錦) of plain weave and the density is various from high to low one. The twill damask(綾) was a variation of twill damask weaved with a six strand warp thread. The complex gause(羅) made patterns as a set of 2 strand, 4 strand, 6 strand and 8 strand warp threads are weaved alternately with the weft. There were three kinds of plain weaved silk(平絹). The first was weaved densely without space between strands. The second was weaved with a small space between strands. And the third was weaved with a two strand warp thread, having a space between the threads. On the other hand, several pieces of well preserved ramie cloth were excavated. Of the, the densest one has the density of 125 strand/inch for the warp and the weft. In addition, strings made of flax thread were found. This suggests that flax fabrics may be found additionally if the hardened lumps of fabrics are resolved and analyzed. Other materials discovered include knits, knotted strings, embroideries, threads and floss. Pieces considered knits and knotted strings occupy a large part of fabrics excavated from King Muryeong's Tomb, and in particular knotted strings show various knotting methods. In addition, embroideries such as chain stitch and button hole stitch are clearly observed. What is more, there are silk threads and hemp threads, which are presumed to have been used for dangling ornaments such as Yeongrak(瓔珞) and beads or for sewing. Besides, floss was found between fabrics.

• Fashion & Textile Research Journal
• /
• v.21 no.2
• /
• pp.203-208
• /
• 2019

This paper considers the moisture permeability and fashion in the upper fabrics of cotton fabric shoes woven into various tissues and properties measured to examine the use as upper fabrics. We measured the tissues of the manufactured upper fabric are 1/3 twill, $4{\times}4$ weft rib, Maya, Triple, Deformed twill design (DTD), Diamond tissues and tear strength, tensile strength, breaking elongation, stretching under load at 100N, stitch tear resistance, and fastness. In the case of $4{\times}4$ weft rib, the tear strength and tensile strength were excellent; however, the elongation and stitch tear resistance at 100N load were less than the standard value. DTD fabrics are characterized by physical properties in the warp direction that are superior to those in the weft direction; however, the tear strength and tensile strength in the weft direction are less than the standard value. The 1/3 twill fabrics showed high tensile strength value and stitch tear resistance value in the warp direction; however, toughness, the main property of the shoe upper, was below the standard value. Triple and diamond fabrics, which have a significant effect on the performance of the shoe upper fabric, also had less than the standard value of tear strength. Maya upper fabric for shoes has better properties than other upper fabrics except for the elongation at break, and the stitch tear resistance has a value of 178% in the warp direction and 214% in the weft direction compared to the standard value. Therefore, the Maya fabric showed the possibility of being used as an upper textile for shoes.

• Fibers and Polymers
• /
• v.7 no.1
• /
• pp.79-84
• /
• 2006

This paper deals with the grey fabric deformation during relaxation. It investigates the effect of twist direction and twist liveliness on the 2/2 twill weave woven fabric distortion, during relaxation This experimental work shows that twist liveliness increases the natural tendency of the twill weave woven fabric to skew. In addition when the twist direction of the warp and weft is opposite to each other the bias curling occurs too.

• Fashion & Textile Research Journal
• /
• v.7 no.4
• /
• pp.433-438
• /
• 2005

Seven commercial lining fabrics normally used in a market were selected: plain-weave fabrics with polyester, nylon, rayon and acetate fiber, and polyester textured yarn, in addition, polyester fabrics with plain, twill and satin weave. Then seam strength, seam efficiency, resistance to slippage of yarns and type of seam destruction were examined related to endurance by textiles in sewing capability of the lining fabrics. In results, as tensile strength was greater, seam strength got greater, which shows tensile strength and seam strength have close relationship. Tensile and seam strength of acetate fabric were the least, but seam efficiency was the greatest. It presents that strong tensile and seam strengths do not show high seam efficiency at the same time. Various types of seam destruction have been shown. When tensile strength of the sewing thread was greater than tensile strength of fabric, fabric destruction was occurred before the sewing thread destruction. When tensile strength of the fabric was greater than seam strength, the sewing thread destruction was occurred. Resistance to slippage of yarns got greater as tensile strength of the fabric got greater. The plain-weave fabric, which tensile strength of fabric was smaller, showed the greater resistance to slippage of yarns than twill and satin weave fabrics. The stretch fabric revealed the optimal lining fabric with the greatest resistance to slippage of yarns.

• Fashion & Textile Research Journal
• /
• v.3 no.1
• /
• pp.15-19
• /
• 2001

The purpose of this study was to determine the thermal characteristics of men's suits ensembles and their fabrics. For the study, 100% wool fabrics were woven with various fabric structure, fabric density and yam count and With the use of these, 12 men's suits were made with the same design. Physical characteristics that affect thermal transport properties, including drapery, cover factor; bulk density, keeping warmth ratio, vapor permeability, air permeability and porosity of the fabrics were measured. In addition, thermal resistance of men's suit ensembles, including Y-shirts, inner wear and socks was measured on the thermal manikin in the environmental chamber. The result of the study was as follows: 1. In terms of fabric structure, keeping warmth ratio of plain woven fabrics was higher than those of twill and satin woven fabrics and also, vapor and air permeability and porosity of plain woven fabrics were higher than those of twill and satin woven fabrics. 2. The result showed that thermal resistance of 12 ensembles were in the range of 0.77clo~0.97clo. 3. There was little correlation between woven condition such as, including structure, fabric density and yam count and thermal resistance of ensembles.

• Composites Research
• /
• v.23 no.5
• /
• pp.8-14
• /
• 2010

Three types of glass woven fabrics (plain, balanced twill, and unbalanced twill) having various sample sizes and aspect ratios were tested using the bias-extension tests. Real-time deformation images, force, and displacement data were collected. For the bias-extension test, the shear angle of the fabrics from the equation based on the crosshead displacement and fabric size was compared with direct manual measurements of the warp and weft angles as well as the optical measurement software. To determine the shear force, an analytical equation was introduced considering the kinematics of the bias-extension test. The obtained shear behaviors were further compared with the results by the trellis-frame test. The optical measurement methods showed that the mathematical method was reasonable before the shear angle of the fabrics reaches $30^{\circ}$ in the bias-extension tests. Also, the bias-extension test gave consistent behaviors with the trellis-frame test only for isotropic and homogeneous fabrics such as balanced plain and twill weaves.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.7
• /
• pp.1193-1202
• /
• 2001

The goal of this research is to investigate the effect of fusible interlinings on the mechanical characteristics and appearance related values for the Lyocell fabrics. In this study, to establish optimum fusing conditions, peel strength of the fused fabrics depending on the fusing temperature, pressure and time was measured. Appearance related properties and mechanical characteristics of the fused fabrics ere determined. The reulst are as follows: In the fusing condition of $120^{\circ}C,\;3kgf/textrm{cm}^2$, 15sec, peel strength was excellent. Peel strength was excellent in the case of tencel/cotton fabric, with increasing cover factor of woven interlining, with twill and nonwoven interlining. Flex stiffness was increased in the case of tencel/cotton fabric, with increasing weight of woven interlining, with twill and nonwoven interlining. Drapability was excellent in the case of 100% tencel fabric, with decreasing weight of woven interlining, with plain and woven interlining. Crease recovery was excellent in the case of 100% tencel fabric, with increasing weight of woven interlining, with twill and woven interlining. Shear and bend properties were increased in the case of tencel/cotton fabric, with increasing weight of woven interlining, with plain and nonwoven interlining.