• 한국항공우주학회지
• /
• 제36권7호
• /
• pp.688-694
• /
• 2008

볼 베어링과 펌프 비접촉 실의 동특성을 고려하여 고추력 액체 로켓 엔진용 터보펌프의 회전체동역학 해석이 수행되었다. 회전 고유진동수와 감쇠비를 예측하기 위하여 회전속도에 따른 복소 고유치 해석이 수행되었다. 동기 회전체 질량 불평형 응답과 시간 과도 응답 해석을 통하여 회전체의 임계속도와 불안정 운전 시작 속도가 확인되었다. 수치 해석 결과로부터 후방 베어링 강성이 임계속도와 불안정성 예측에 있어서 가장 중요한 인자로 확인되었는데, 이는 1차 모드가 터빈부 회전축 굽힘 모드인 것에 기인한다. 임계속도에 있어서 펌프 실의 영향은 후방 베어링 강성이 감소할수록 그리고 전방 베어링 강성이 증가할수록 확대되는 것으로 나타났다.

• Tribology and Lubricants
• /
• 제31권6호
• /
• pp.294-301
• /
• 2015

In this paper, we predict the rotordynamic force coefficients of tilting pad journal bearings (TPJBs) with rocker-back pivots, and we compare the predictions to recently published predictions and test data. The present TPJB model considers the rocker-back pivot stiffness calculated based on the Hertzian contact-stress theory, which is nonlinear with the application of a force . For the five-pad TPJB in load-between-pad and load-on-pad configurations, the predictions show the pressure- and film-thickness distributions, the deflection and stiffness of the individual pivots, and bearing stiffness and damping coefficients. The minimum film thickness and peak pressure occur at the bottom pad on which the applied load is directed. Because of the preload, the pres- sure is positive even at the upper pad in the opposite direction to the applied load. The pivot deflection and stiff- ness are maximum at the bottom pad that receives the heaviest pressure load. The predicted stiffness coefficients increase as the static load and rotor speed increase, while the damping coefficients decrease as the rotor speed increases, but increase as the static load increases. In general, the predicted stiffness coefficients agree well with the test data. The predicted damping coefficients overestimate the test data, particularly for large static loads. In general, the current predictive model considering the pivot stiffness improves the accuracy of the rotordynamic performance compared to previously reported models.

• Design & Manufacturing
• /
• 제2권5호
• /
• pp.43-47
• /
• 2008

Micro Electrochemical Machining(Micro ECM) has traditionally been used in highly specialized fields such as those of the aerospace and defense industries. It is now increasingly being applied in other industries where parts with difficult-to-cut material, complex geometry and tribology such as compute. hard disk drive(HDD) are required. Pulse Electrochemical Micro-machining provides an economical and effective method for machining high strength, high tension, heat-resistant materials into complex shapes such as turbine blades of titanium and aluminum alloys. Usually aluminum alloys are used bearings to hard disk drive in computer. In order to apply aluminum alloys to bearing used in hard disk drive, this paper presents the characteristics of Micro ECM for aluminum alloy.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2003년도 춘계학술대회 논문집
• /
• pp.53-54
• /
• 2003

현대 산업사회가 다양해짐에 따라 발생되는 생활폐기물의 형태도 다양화되었고 발생폐기물의 성상은 연소가 어려운 난분해성 폐기물로 발열량이 높아지고 있다. 이러한 폐기물의 처리를 위한 소각설비는 폐기물 처리형태에 따라 대형의 도시 쓰레기 소각장이나 지자체의 중형급 소각장, 발생원 단위의 소형 소각장으로 구분하여 처리하고있다. 기존 중ㆍ대형 소각로의 유해가스 처리시설은 일반적으로 냉각설비와 가스상 처리설비, 입자상 처리설비 등으로 구성되는데 반해, 소형 소각로는 싸이클론 방식만으로 구성되어 입자상 물질만을 처리하였으나, 최근에 들어서 관련법규가 개정되어 소형 소각로에서도 입자상 오염물질뿐만 아니라 HCl 및 SOx 등과 같은 산성가스류와 다이옥신 등의 배출농도를 규제함에 따라 가스상 오염물질도 처리하는 방안을 도입하고 있는 추세이다. (중략)

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.307-313
• /
• 2002

In the paper, the prototype development of a 75kW class microturbine for the distributed generation market is partly presented which has continued with the government funding. In the introduction, an overview of the development of microturbines in the world is presented. A series of development procedures are shown with design, manufacture and self-sustaining tests. During the first year, aerodynamic and structural design/analysis, mechanical design are performed for the compressor, the turbine and the combustor. A premixed lean burn combustor technology is used fur the low emission requirements. Foil air bearings and high-speed motors are employed for higher reliability. The self-sustaining conditions have been successfully achieved with the prototype manufactured engine as a preceding operation.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.265-268
• /
• 2006

Performed fatigue strength analysis for Hub to get the targeted service life of 20 years. ANSYS is used to analysis. The major structure of bearing which connect the hub and blades is modeled using the element of LINK10. To represent the stiffness of LINK10 element, initial strain and diameter of LINK10 element is applied. Prior to calculating the fatigue damages, the influence matrix is extracted from the unit loads. The target service life of 20 years is achieved from the Analysis results.

• Smart Structures and Systems
• /
• 제6권4호
• /
• pp.389-403
• /
• 2010

By using image recognition technology, this paper presents a new fault diagnosis method for rotating machinery with artificial immune algorithm. This method focuses on the vibration state parameter image. The main contribution of this paper is as follows: firstly, 3-D spectrum is created with raw vibrating signals. Secondly, feature information in the state parameter image of rotating machinery is extracted by using Wavelet Packet transformation. Finally, artificial immune algorithm is adopted to diagnose rotating machinery fault. On the modeling of 600MW turbine experimental bench, rotor's normal rate, fault of unbalance, misalignment and bearing pedestal looseness are being examined. It's demonstrated from the diagnosis example of rotating machinery that the proposed method can improve the accuracy rate and diagnosis system robust quality effectively.

• 비파괴검사학회지
• /
• 제16권2호
• /
• pp.109-114
• /
• 1996

본 보고는 79년 이후부터 90. 9월까지 한국전력공사의 전 사업소의 터빈 베어링 보관품에 대한 비파괴시험 결과와 보관 방법 개선후의 효과 측정 결과를 기술한 내용이다. 비파괴시험을 실시한 결과 총 156조 중 115조(73.7%)라는 많은 수의 베어링에서 결함이 발생되어 예비품으로서의 역할을 못하고 있는 실정이었다. 이에 따라 지역적인 특성을 고려하여 영동, 인천, 호남화력발전처를 대상으로 선정하여 터빈 베어링의 적정보관 방법 개선 시험을 완료(91.12)하였으며, 보관 방법 개선후 4년간($92.1{\sim}95.12$)의 효과를 측정하고 그 결과를 기술하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1998년도 강연회 및 연구개발 발표회 논문집
• /
• pp.203-209
• /
• 1998

Rotordynamic analysis of a multistage turbine pump using finite element method is performed to investigate the effects of seal wear on Its system behavior. Stiffness and damping coefficients of the 2-axial grooved bearing are obtained as functions of rotating speed. Stiffness and damping coefficients of plane annular seals are calculated as functions of rotating speed as well as seal clearance. As the clearance of seals become larger, these stiffness and damping coefficients decrease drastically so that there can be significant changes in whirl natural frequencies and damping characteristics of the pump rotor system. Although a pump is designed to operate with a sufficient seperation margin from the 1st critical speed, seal wear due to long operation may cause a sudden increase in nitration amplitude by resonance shift and reduce seal damping capability.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.214-217
• /
• 2002

Micro Surface Electrochemical Machining has traditionally been used in highly specialized fields such as those of the aerospace and defense industries. It is now increasingly being applied in other industries where parts with difficult-to-cut material, complex geometry and tribology such as compute. hard disk drive(HDD) are required. Pulse Electrochemical Micro-machining provides an economical and effective method for machining high strength, high tension, heat-resistant materials into complex shapes such as turbine blades of titanium and aluminum alloys. Usually aluminum alloys are used bearings to hard disk drive in computer. In order to apply aluminum alloys to bearing used in hard disk drive, this paper presents the characteristics of Micro Surface Electrochemical machining for aluminum alloy.