• Geomechanics and Engineering
• /
• 제38권1호
• /
• pp.69-77
• /
• 2024

The development of shield-driven cross-river tunnels in China is witnessing a notable shift towards larger diameters, longer distances, and higher water pressures due to the more complex excavation environment. Complex geological formations, such as fault and karst cavities, pose significant construction risks. Real-time adjustment of shield tunneling parameters based on parameter prediction is the key to ensuring the safety and efficiency of shield tunneling. In this study, prediction models for the torque and thrust of the cutter plate of ultra-large diameter slurry shield TBMs is established based on integrated learning algorithms, by analyzing the real data of Heyan Road cross-river tunnel. The influence of geological complexities at the excavation face, substantial burial depth, and high water level on the slurry shield tunneling parameters are considered in the models. The results reveal that the predictive models established by applying Random Forest and AdaBoost algorithms exhibit strong agreement with actual data, which indicates that the good adaptability and predictive accuracy of these two models. The models proposed in this study can be applied in the real-time prediction and adaptive adjustment of the tunneling parameters for shield tunneling under complex geological conditions.

• Journal of electromagnetic engineering and science
• /
• 제14권1호
• /
• pp.36-42
• /
• 2014

In this paper, an epsilon near zero (ENZ) tunneling circuit using a double-ridge rectangular waveguide (RWG) is proposed for the miniaturization of a waveguide component. The proposed ENZ channel and is located in the middle of the input-output RWG (IORWG). The ratio of the height to the width of the channel waveguide is very small compared to the IORWG. By properly adjusting the ridge dimensions, the tunneling frequency of the proposed ENZ channel can be lowered to near the cut-off frequency of the IORWG. For the proposed ENZ tunneling circuit, the approach adopted for extracting the effective permittivity, effective permeability;normalized effective wave impedance, and propagation constant from the simulated scattering parameters was explained. The extracted parameters verified that the proposed channel is an ENZ channel and electromagnetic energy is tunneling through the channel. Simulation and measurement results of the fabricated ENZ channel structure agreed.

• Geomechanics and Engineering
• /
• 제35권6호
• /
• pp.647-663
• /
• 2023

The investigation of the disc cutter wear prediction has an important guiding role in TBM equipment selection, project planning, and cost forecasting, especially when tunneling in a long-distance rock formations with high strength and high abrasivity. In this study, a comprehensive database of disc cutter wear data, geological properties, and tunneling parameters is obtained from a 1326 m excavated metro tunnel project in leptynite in Shenzhen, China. The failure forms and wear consumption of disc cutters on site are analyzed with emphasis. The results showed that 81% of disc cutters fail due to uniform wear, and other cutters are replaced owing to abnormal wear, especially flat wear of the cutter rings. In addition, it is found that there is a reasonable direct proportional relationship between the uniform wear rate (WR) and the installation radius (R), and the coefficient depends on geological characteristics and tunneling parameters. Thus, a preliminary prediction formula of the uniform wear rate, based on the installation radius of the cutterhead, was established. The correlation between some important geological properties (K_V and UCS) along with some tunneling parameters (F_n and p) and wear rate was discussed using regression analysis methods, and several prediction models for uniform wear rate were developed. Compared with a single variable, the multivariable model shows better prediction ability, and 89% of WR can be accurately estimated. The prediction model has reliability and provides a practical tool for wear prediction of disc cutter under similar hard rock projects with similar geological conditions.

• Geomechanics and Engineering
• /
• 제11권1호
• /
• pp.117-139
• /
• 2016

Previous studies for soil movements induced by tunneling have primarily focused on the free soil displacements. However, the stiffness of existing structures is expected to alter tunneling-induced ground movements, the sheltering influences for underground structures should be included. Furthermore, minimal attention has been given to the settings for the shield machine's operation parameters during the process of tunnels crossing above and below existing tunnels. Based on the Shanghai railway project, the soil movements induced by an earth pressure balance (EPB) shield considering the sheltering effects of existing tunnels are presented by the simplified theoretical method, the three-dimensional finite element (3D FE) simulation method, and the in-situ monitoring method. The deformation prediction of existing tunnels during complex traversing process is also presented. In addition, the deformation controlling safety measurements are carried out simultaneously to obtain the settings for the shield propulsion parameters, including earth pressure for cutting open, synchronized grouting, propulsion speed, and cutter head torque. It appears that the sheltering effects of underground structures have a great influence on ground movements caused by tunneling. The error obtained by the previous simplified methods based on the free soil displacements cannot be dismissed when encountering many existing structures.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.2014-2020
• /
• 2017

A compact current model applicable to both single-gate (SG) and double-gate (DG) tunneling field-effect transistors (TFETs) is presented. The model is based on Kane's band-to-band tunneling (BTBT) model. In this model, the well-known and previously-reported quasi-2-D solution of Poisson's equation is used for the surface potential and length of the tunneling path in the tunneling region. An analytical tunneling current expression is derived from expressions of derivatives of local electric field and surface potential with respect to tunneling direction. The previously reported correction factor with three fitting parameters, compensating for superlinear onset and saturation current with drain voltage, is used. Simulation results of the proposed TFET model are compared with those from a technology computer-aided-design (TCAD) simulator, and good agreement in all operational bias is demonstrated. The proposed SG/DG-TFET model is developed with Verilog-A for circuit simulation. A TFET inverter is simulated with the Verilog-A SG/DG-TFET model in the circuit simulator; the model exhibits typical inverter characteristics, thereby confirming its effectiveness.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1670-1676
• /
• 2014

This paper presents the modeling of Single Electron Transistor (SET) based on Physical model of a device and its equivalent circuit. The physical model is derived from Schrodinger equation. The wave function of the electrode is calculated using Hartree-Fock method and the quantum dot calculation is obtained from WKB approximation. The resulting wave functions are used to compute tunneling rates. From the tunneling rate the current is calculated. The equivalent circuit model discuss about the effect of capacitance on tunneling probability and free energy change. The parameters of equivalent circuit are extracted and optimized using genetic algorithm. The effect of tunneling probability, temperature variation effect on tunneling rate, coulomb blockade effect and current voltage characteristics are discussed.

• 한국지반환경공학회 논문집
• /
• 제15권11호
• /
• pp.29-42
• /
• 2014

This paper investigates the effects of micro-tunneling on buried pipelines parametrically. A simplified numerical approach was developed and various parametric studies have been conducted to evaluate the effects of ground settlements on the response of buried pipelines. The controlled parameters included the pipe stiffness, ground loss magnitude, and pipe location with respect to a micro-tunnel. Maximum settlement and curvature along a pipeline have been investigated and compared among others for different conditions. In addition, the numerical results have been compared with a theoretical method by Attewell et al. (1986), which is based on a Winkler type linear-elastic solution. The comparison indicated that the response of buried pipes to micro-tunneling-induced ground settlements highly depends on the soil-pipe interaction including the separation and slippage of pipe from soil with the effects of the investigated parameters. Therefore, rather than using the theoretical method directly, it would be a better assessment of the response of buried pipelines to consider the soil-pipe interaction in more realistic conditions.

• 한국정보통신학회논문지
• /
• 제19권7호
• /
• pp.1617-1622
• /
• 2015

본 연구에서는 10 nm이하 채널길이를 갖는 비대칭 이중게이트 MOSFET의 채널도핑농도 변화에 대한 터널링 전류(tunneling current)의 변화에 대하여 분석하고자 한다. 채널길이가 10 nm이하로 감소하면 차단전류에서 터널링 전류의 비율이 문턱전압이하 영역에서 차지하는 비율이 증가하게 된다. 비록 비대칭 이중게이트 MOSFET가 단채널효과를 감소시키기 위하여 개발되었을지라도 10 nm 이하에서 터널링 전류에 의한 차단전류의 증가는 필연적이다. 본 연구에서는 채널도핑농도의 변화에 대하여 차단전류 중에 터널링 전류의 비율 변화를 계산함으로써 단채널에서 발생하는 터널링 전류의 영향을 관찰하고자 한다. 열방사 전류와 터널링 전류로 구성된 차단전류를 구하기 위하여 포아송방정식을 이용하여 해석학적 전위분포를 구하였으며 WKB(Wentzel- Kramers-Brillouin) 근사를 이용하여 터널링 전류를 구하였다. 결과적으로 10 nm이하의 채널길이를 갖는 비대칭 이중게이트 MOSFET에서는 채널도핑농도에 의하여 터널링 전류가 크게 변화하는 것을 알 수 있었다. 특히 채널길이, 채널두께, 상하단 게이트 산화막 및 전압 등의 파라미터에 따라 매우 큰 변화를 보이고 있었다.

• 대한전자공학회논문지SD
• /
• 제49권4호
• /
• pp.1-6
• /
• 2012

본 논문에서는 고주파에서 동작하는 터널링 전계효과 트랜지스터 (TFET)의 소신호 파라미터 추출과 이에 대한 분석을 다루고 있다. 시뮬레이션으로 구현된 TFET의 채널 길이는 50 nm에서 100 nm 사이에서 변화되었다. Conventional planar MOSFET 기반의 quasi-static 모델을 이용하여 TFET의 파라미터 추출이 이루어졌으며 다른 채널 길이를 갖는 TFET에 대한 소신호 파라미터의 값을 게이트 바이어스 변화에 따라서 추출하였다. 추출 결과로부터 effective gate resistance와 transconductance, source-drain conductance, gate capacitance 등 주요 파라미터의 채널 길이 변화에 따른 경향성이 conventional MOSFET과 상당히 다른 것을 확인하였다. 그리고 $f_T$는 MOSFET과 달리 게이트 길이 역수의 값에 정확히 반비례하는 특성을 보였으며 TFET의 고주파 특성 향상을 transconductance의 개선이 아닌 gate capacitance의 감소에 의하여 가능함을 알 수 있었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권1호
• /
• pp.1-5
• /
• 2014

We calculated the resonance tunneling energy band in the BCS gap for Type-II superconductor in which periodic potential is generated by external magnetic flux. In this model, penetrating magnetic flux was assumed to be in a fixed lattice state which is not moving by an external force. We observed the existence of two subbands when we used the same parameters as for the $Nd_{1.85}Ce_{0.15}CuO_X$ thin film experiment. The voltages at which the regions of negative differential resistivity (NDR) started after the resonant tunneling ended were in a good agreement with the experimental data in the field region of 1 T - 2.2 T, but not in the high field regions. Discrepancy occurred in the high field region is considered to be caused by that the potential barrier could not be maintained because the current induced by resonant tunneling exceeds the superconducting critical current. In order to have better agreement in the low field region, more concrete designing of the potential rather than a simple square well used in the calculation might be needed. Based on this result, we can predict an occurrence of the electromagnetic radiation of as much difference of energy caused by the 2nd order resonant tunneling in which electrons transit from the 2nd band to the 1st band in the potential wells.