• 한국터널지하공간학회 논문집
• /
• 제18권3호
• /
• pp.273-282
• /
• 2016

본 연구에서는 기존에 제안된 8가지의 이론식과 3차원 수치해석으로 막장압을 산정하여 비교 검토하였다. 일반적으로 국내 쉴드TBM의 막장압 산정은 이론식과 경험에 따른 방법으로 검토되고 있는 실정이나 복잡한 지층조건, 특수한 지반조건을 통과하는 구간에 대해서는 수치해석을 병행하고 있다. 따라서 이론식으로 산정된 막장압과 수치해석 프로그램에서 산정되는 막장압의 상관관계를 확인하여 막장압의 신뢰성 있는 검토방법을 찾고자 하였다. 막장압 산정시 이론식과 수치해석 모두 사질토와 점성토 지반조건에서 동일하게 검토하였으며, 이론식은 기존에 제안된 식을 사용하였고 수치해석은 쉴드터널의 시공과정을 모사한 3차원 해석을 수행하였다.

• Geomechanics and Engineering
• /
• 제14권5호
• /
• pp.407-419
• /
• 2018

In order to investigate flow characteristics after water inrush from the working face in process of karst tunnel construction, numerical calculation for two class case studies of water inrush is carried out by using the FLUENT software on the background of Qiyueshan tunnel. For each class water inrush from the tunnel face, five cases under different water-inrush velocity are simulated and researched. Three probing lines are selected respectively in the left tunnel, cross passage, right tunnel and in the height direction of the tunnel centerline. The variation characteristics of velocity and pressure on each probing line under the five water-inrush velocities are analyzed. As for the selected four groups probing lines in the tunnels, the change rules of velocity and pressure on each group probing lines under the same water-inrush velocity are discussed. Finally, the water flow characteristics after inrush from the tunnel face are summarized by comparing the case studies. The results indicate that: (1) The velocity and pressure change greatly at the intersection area of the cross passage and the tunnels. (2) The velocity nearby the tunnel side wall is the minimum, while it is the maximum in the middle position. (3) The pressure value of every cross section in the tunnels is basically fixed. (4) As water-inrush velocity increases, the flow velocity and pressure in the tunnels also increase. The former is approximately proportional to their respective water-inrush velocity, while the latter is not. The research results provide a theoretical basis for making scientific and rational escape routes.

• 터널과지하공간
• /
• 제13권2호
• /
• pp.125-137
• /
• 2003

본 연구에서는 복개 터널구조물의 라이닝 설치 후 되메움 성토과정에서 라이닝에 발생하는 토압 크기및 분포 등의 거동특성을 파악하기 위하여 실제 복개 터널구조물의 시공현장에서 현장 계측을 수행하였다. 현장계측은 토압계, 콘크리트 응력계, 철근 응력계의 세 종류의 계측기를 매설하여 측정하였다. 토압계는 라이닝의 원주방향을 따라 매설하며 터널 라이닝에 작용하는 외부 하중을 측정하였다. 세 개의 토압계는 천단부와 터널 횡단면의 중심축을 기준으로 좌 · 우측 어깨부 45도 지점에 각각 설치하였다. 철근 응력계는 라이닝에 배근된 복철근에 한 셋트씩 세 곳에 설치하였으며 설치 위치는 토압계의 설치 위치와 동일하게 하였다. 콘크리트 응력계는 천단부 상단 압축측 단면의 한 곳에만 설치하였다. 현장 계측 결과를 이용하여 되메움 성토 과정에 발생하는 라이닝의 변형과 라이닝 외부 작용 토압의 거동 특성을 살펴보았으며, 이론적 추론으로 계측결과의 타당성을 검토하였다

• Wind and Structures
• /
• 제35권4호
• /
• pp.269-285
• /
• 2022

The pressure-mitigating effects of a high-speed train passing through a tunnel with a partially reduced cross-section are investigated via the numerical approach. A compressible, three-dimensional RNG k-ε turbulence model and a hybrid mesh strategy are adopted to reproduce that event, which is validated by the moving model test. Three step-like tunnel forms and two additional transitions at the tunnel junction are proposed and their aerodynamic performance is compared and scrutinized with a constant cross-sectional tunnel as the benchmark. The results show that the tunnel step is unrelated to the pressure mitigation effects since the case of a double-step tunnel has no advantage in comparison to a single-step tunnel, but the excavated volume is an essential matter. The pressure peaks are reduced at different levels along with the increase of the excavated earth volume and the peaks are either fitted with power or logarithmic function relationships. In addition, the Arc and Oblique-transitions have very limited gaps, and their pressure curves are identical to each other, whereas the Rec-transition leads to relatively lower pressure peaks in C_Pmax, C_Pmin, and ΔC_P, with 5.2%, 4.0%, and 4.1% relieved compared with Oblique-transition. This study could provide guidance for the design of the novel railway tunnel.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1199-1213
• /
• 2011

이수가압식 쉴드공법은 사질토에서 적용성이 우수하지만, 이수압이 낮으면 이수 유출 및 지반변형이 발생하기도 한다. 따라서 이수가압식 쉴드에서는 초기 막장압보다 큰 초과 이수압을 가하여 막장 안정을 유지한다. 그러나 이수압이 너무 높으면 전방 지반의 수동 파괴를 유발하므로 수동 파괴 위험성을 줄이고 이수압을 증가시키는 방법으로 막장 전방에 수평 차수층을 설치하는 방안이 있으나 위치와 규모, 효과가 잘 알려져 있지 않다. 따라서 본 연구에서는 포화 사질토에서 막장전방에 차수 그라우팅 적용시 발생하는 효과를 규명하기 위하여 모형실험을 수행하였다. 실험 결과, 차수층이 있는 경우가 없는 경우보다 이수압을 크게 가할 수 있어서 전방 차수층이 막장 안정성을 증대시킬 수 있다는 것을 확인하였다. 막장 안정성 증대에 가장 큰 영향을 주는 적정 차수층은 길이 1.0~1.5D, 설치높이 1.0D로 나타났다. 초기 막장압 대비 최대 이수압의 비로 막장의 자립 안전율(F)을 제안할 수 있으며, 전방 차수층을 적정 위치에 설치할 경우 초기 막장압보다 3.5~4.0배 크게 이수압을 가할 수 있는 것으로 나타났다.

• Geomechanics and Engineering
• /
• 제16권1호
• /
• pp.97-104
• /
• 2018

The finite difference software Flac3D is used to study the influence of tunnel burial depth, tunnel diameter and lateral pressure coefficient of original rock stress on the stress and deformation of tunnel surrounding rock under sandstone condition. The results show that the maximum shear stress, the radius of the plastic zone and the maximum displacement in the surrounding rock increase with the increase of the diameter of the tunnel. When the lateral pressure coefficient is 1, it is most favorable for surrounding rock and lining structure, with the increase or decrease of lateral pressure coefficient, the maximum principal stress, surrounding displacement and plastic zone range of surrounding rock and lining show a sharp increase trend, the plastic zone on the lining increases with the increase of buried depth.

• 한국유체기계학회 논문집
• /
• 제9권6호
• /
• pp.17-21
• /
• 2006

The numerical simulations on the train entering a tunnel were performed by solving unsteady axi-symmetric problems. In the case that 5th order velocity profile is used to reduce the effects of the pressure wave generated by the train starting abruptly, the effect of the initial distance between the train and the tunnel were examined. The impulsive start gives undesired pressure disturbances to the flow field including inside the tunnel. But 5th order velocity profile with initial distance more than 80 m gives much stable pressure variance in time, and pressure distribution inside the tunnel in space. The distance to the train reaches the highest running velocity from the start should be more than 80 m when the train speed is 350 km/h.

• 대한기계학회논문집B
• /
• 제25권6호
• /
• pp.758-765
• /
• 2001

Purpose of the present is to investigate the food configuration at a tunnel entrance for reducing the micro pressure wave that is generated according to train speed. Two configurations were examined for tunnel of 0.5 km length. The experimental results show that a slit cover hood installed at the entrance of the tunnel reduces the maximum micro pressure wave by 41.2%, and a configuration with a slit cover hood installed at the entrance and a 45$^{\circ}$slanted portal at the exit of the tunnel suppresses it by 47.7%.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.952-957
• /
• 2004

Cut and Cover Method is generally used in shallow tunnels and tunnel entrances with thin soil cover. In this type of cons0truction, backfilling is considered to be the most important process. In this process even though the backfill material is thoroughly compacted, compaction and self-weight due to vehicular vibration and pressure exerted by the soil cause the backfill material to undergo self-compression which leads to settlement. The settlement of the backfill material subjects the tunnel lining under excessive earth pressure which cause cracking and deformation. In the model test performed installation of geotextile on the sides and top of the tunnel was able to reduce the earth pressure acting on the tunnel lining.

• 한국전산유체공학회지
• /
• 제15권4호
• /
• pp.53-59
• /
• 2010

Preliminary design of a ground plate, a device installed close to the aircraft model for wind tunnel test to simulate the ground effect, was performed by a numerical simulation. A two-dimensional numerical study was performed initially to decide the optimal leading edge and flap configurations. Then, three-dimensional studies were conducted to decide the optimal flap deflection angle for pressure distribution reduction since the plate and the plate supporting system generate static pressure difference between the upper and lower flow regions. Three-dimensional simulation additionally studied the effect of the clearance between the plate and the wind tunnel side wall. For the efficiency of computation, half model was simulated and a symmetric boundary condition was applied on the center plane. Based on the preliminary design, a ground plate was designed, manufactured and tested at the Korea Aerospace Research Institute(KARI) wind tunnel. The measured pressure differences versus flap deflection angle agreed well with the predicted results.