• 대한기계학회논문집B
• /
• 제36권3호
• /
• pp.363-369
• /
• 2012

CANDU형 원전의 칼란드리아 내부 감속재 열유동은 입구 노즐에서 나온 제트 유동에 의해 발생하는 관성력과 감속재로 전달되는 열부하에 의해 발생하는 부력의 상호작용으로 인해 복잡한 난류 특성을 나타낸다. 본 연구에서는 이러한 복잡한 감속재 열유동을 정확히 예측하기 위한 난류모델의 성능을 평가하기 위해 상용 유동해석 프로그램인 FLUENT에 탑재된 난류모델들을 사용해서 계산한 결과를 Sheridan Park Engineering Laboratory (SPEL)의 실험값과 비교하였다. 결론적으로 CANDU형 원전의 칼란드리아 내부 감속재 열유동을 신뢰할 수 있게 예측하기 위해서는 부력이 난류 유동에 미치는 영향을 고려해주는 생성항을 포함한 난류 모델이 사용되어야 한다.

• 에너지공학
• /
• 제13권2호
• /
• pp.93-100
• /
• 2004

간접법을 이용한 표면오염도 측정 시 시료채취와 동시에 방사선 검출이 가능한 스메어 매체를 제조하고 성능을 평가하였다. 스메어 매체는 무기섬광체를 고분자 막에 함침시킨 것으로서, 용매로는 디메틸포름아마이드(DMF)와 메틸렌클로라이드(MC) 그리고 고분자 소재로서 폴리설폰(PSF)을 사용하였고, 무기섬광체는 CAYS(cerium activated yttrium silicate)를 사용하였다. 함침막은 단일 및 이중구조로 제조하였고, 물. 메타놀 등 비용매성 욕조에 침지하거나 용매 증발을 통하여 고형화하여 특성을 비교하였다. 방사선과의 상호작용에 의하여 무기섬광물질 함침막으로부터 방출되는 광자의 계측은 광전증배관과 고전압원, 증폭기. 계수기로 구성된 원형계수기를 사용하였다. $^{14}$ C표면오염에 대해 무기섬광 함침막을 이용해 얻은 계수율을 통상의 저준위 알파/베타 계수기로 얻은 결과와 비교할 때 상대 감도가 약 50%로 나타났다. 또한, 계수효율이 상대적으로 낮았지만 저에너지 베타선 방출핵종인 $^3$H표면오염도측정이 가능하다는 것을 확인하였다.

• Membrane and Water Treatment
• /
• 제7권4호
• /
• pp.277-296
• /
• 2016

The aim of this research was to investigate the ability of nanofiltration (NF) and ultrafiltration (UF) membranes as a filtration unit for groundwater treatment for drinking water resources. Commercial membranes denoted as TS40, TFC-SR3 and GHSP were used to study the performance based on rejections and fluxes. The investigation has been conducted using natural groundwater obtained from a deep tube well with initial concentration of iron (Fe) and manganese (Mn) at 7.15 mg/L and 0.87 mg/L, respectively. Experimental results showed that NF membranes exhibited higher fluxes than UF membrane with pure water permeability at 4.68, 3.99 and $3.15L.m^{-2}.h^{-1}.bar^{-1}$, respectively. For metal rejection, these membranes have performed higher removal on Fe with TS40, TFC-SR3 and GHSP membranes having more than 82%, 92% and 86% respectively. Whereas, removal on Mn only achieved up to 60%, 80% and 30%, for TS40, TFC-SR3 and GHSP membranes respectively. In order to achieve drinking water standard, the membranes were efficient in removing Fe ion at 1 and 2 bar in contrast with Mn ion at 4 and 5 bar. Higher rejection of Fe and Mn were achieved when pH of feed solution was increased to more than 7 as TFC-SR3 membrane was negatively charged in basic solution. This effect could be attributed to the electrostatic effect interaction between membrane material and rejected ions. In conclusion, this study proved that NF membrane especially the TFC-SR3 membrane successfully treated local groundwater sources for public drinking water supply in line with the WHO standard.

• International Journal of Fluid Machinery and Systems
• /
• 제8권2호
• /
• pp.102-112
• /
• 2015

In the Nordic grid, a trend observed the recent years is the increase in grid frequency variations, which means the frequency is outside the normal range (49.9-50.1 Hz) more often. Variations in the grid frequency leads to changes in the speed of rotation of all the turbines connected to the grid, since the speed of rotation is closely related to the grid frequency for synchronous generators. When the speed of rotation changes, this implies that the net torque acting on the rotating masses are changed, and the material of the turbine runners must withstand these changes in torque. Frequency variations thus leads to torque oscillations in the turbine, which become dynamical loads that the runner must be able to withstand. Several new Francis runners have recently experienced cracks in the runner blades due to fatigue, obviously due to the runner design not taking into account the actual loads on the runner. In this paper, the torque oscillations and dynamic loads due to the variations in grid frequency are simulated in a 1D MATLAB program, and measured grid frequency is used as input to the simulation program. The maximum increase and decrease in the grid frequency over a 440 seconds interval have been investigated, in addition to an extreme event where the frequency decreased far below the normal range within a few seconds. The dynamic loading originating from grid frequency variations is qualitatively found by a constructed variable $T_{stress}$, and for the simulations presented here the variations in $T_{stress}$ are found to be around 3 % of the mean value, which is a relatively small dynamic load. The important thing to remember is that these dynamic loads come in addition to all other dynamic loads, like rotor-stator interaction and draft tube surges, and should be included in the design process, if not found to be negligible.

• 소성∙가공
• /
• 제17권5호
• /
• pp.364-372
• /
• 2008

In this study, the circumferential creep behaviors ofpilgered advanced Zirconium alloy tubes such as Zr-Nb-O and Zr-Nb-Sn-Fe were investigated in the temperature range of $400\sim500^{\circ}C$ and in the stress range of 80$\sim$150MPa. The test results indicate that the stress exponent for the steady-state creep rate of the Zr-Nb-Sn-Fe alloy decreases with the increase of stress(from 6$\sim$7 to 4), while that of the Zr-Nb-O alloy is nearly independent of stress(5$\sim$6). The activation energy of creep deformation is found to be nearly the same as the activation energy for Zr self diffusion. This indicates that the creep deformation may be controlled by dislocation climb mechanism in Zr-Nb-O. On the other hand, the transition of stress exponent(from 6-7 to 4) in Zr-Nb Sn-Fe strongly suggests the transition of the rate controlling mechanism at high stresses. The lower stress exponent at high stresses in Zr-Nb-Sn-Fe can be explained by the dynamic deformation aging effect caused by interaction of dislocations with Sn substitutional atoms.

• 한국항공우주학회지
• /
• 제30권5호
• /
• pp.24-31
• /
• 2002

축 대칭 원형노즐 출구에 삼각형 형태의 작은 탭이나 얇은 테이프가 부착되었을 때 나타나는 초음속 제트유동장의 변화에 관한 연구가 쉴리렌 영상과 피토압력 측정을 통하여 수행되었다. 노즐 출구면적의 1 %에 해당하는 작은 탭에서 나타나는 유동방향 와류에 의한 제트유동 변화는 유동이 과소팽창 될 때 완전팽창과 과대팽창의 경우에 비하여 더 크게 나타나며 이로 인한 유동유입이 더 크게 나타남을 알 수 있었다. 탭의 설치각도 변화에 의한 영향도 평가되었으며, 유동이 과대팽창 될 때 노즐 안으로 구부러진 탭의 설치가 충격파의 간섭강도를 약화시키고 이로 인한 마하디스크의 소멸현상을 관찰할 수 있었다. 아울러 노즐내부 낮은 높이의 돌출부가 후방 유동장의 원주방향으로 압력변화를 나타내고, 이러한 압력변화는 유동의 팽창 정도에 영향을 받음을 알 수 있었다.

• 한국자동차공학회논문집
• /
• 제19권5호
• /
• pp.134-142
• /
• 2011

Although combustion is essential in most energy generation processes, it is one of the major causes of air pollution. Exhaust pipes with circular fin were designed to study the effect of cooling the recirculated exhaust gases (EGR) of Diesel engines on the chemical composition of the exhaust gases and the reduction in the percentages of pollutant emissions. The gases examined in this study were oxides of nitrogen (NOx), carbon dioxide ($CO_2$) and carbon monoxide (CO). In addition, $O_2$ concentration in the exhaust was measured. The designs adopted in this study were about exhaust pipes with solid and hollow fins around them direct surface force measurement in water using a nano size colloidal probe technique. The direct force measurement between colloidal surfaces has been an essential topic in both theories and applications of surface chemistry. As particle size is decreased from micron size down to true Carbon nano Colloid size (<10 nm), surface forces are increasingly important. Nano particles at close proximity or high solids loading are expected to show a different behavior than what can be estimated from continuum and mean field theories. The current tools for directly measuring interaction forces such as a surface force apparatus or atomic force microscopy (AFM) are limited to particles much larger than nano size. This paper use Water and CNC fluid at normal cooling system of EGR. Experimental result showed all good agreement at Re=$2.54{\times}10^4$ by free convection and Re=$3.36{\times}10^4$ by forced air furnace.

• 한국유체기계학회 논문집
• /
• 제18권3호
• /
• pp.46-52
• /
• 2015

Pump-turbine system is widely used by the hydropower industry for stabilizing the electrical grid in the vast growing economy of most developed countries. This study only investigates the Fluid-structure Interaction (FSI) analysis of the pump-turbine system at various operating conditions. The FSI analysis can show how reliable each component of the system is by providing the engineer with a better understanding of high stress and deformation points, which could reduce the lifespan of the pump-turbine. Pump-turbine components are categorized in two parts, pressurized static parts and movable stressed parts. The fixed parts include the spiral casing, top and bottom cover, stay vane and draft tube. The movable parts include guide vanes and impeller blades. Fine hexahedral numerical grids were used for CFD calculation and fine tetrahedral grids were used for structural analysis with imported load solution mapping greater than 90 %. The maximum equivalent stress are much smaller than the material yield stress, and the maximum equivalent stress showed an increasing tendency with the varying of operating conditions from partial to excessive at both modes. In addition, the total deformation of all the operating conditions showed a small magnitude, which have quite small influence on the structural stability. It can be conjectured that this system can be safely implemented.

• 국제초고층학회논문집
• /
• 제9권3호
• /
• pp.273-282
• /
• 2020

An innovative high-rise timber-concrete hybrid structure was proposed in previous research, which is composed of the concrete frame-tube structure and the prefabricated timber modules as main structure and substructures, respectively. Considering that the timber substructures are built on the concrete floors at a different height, the floor response spectrum is more effective in estimating the seismic response of substructures. In this paper, the floor response spectra of the hybrid structure with different structural parameters were calculated using dynamic time-history analysis. Firstly, one simplified model that can well predict the seismic response of the hybrid structure was proposed and validated. Then the construction site, the mass ratio and the frequency ratio of the main-sub structure, and the damping ratio of the substructures were discussed. The results demonstrate that the peaks of the floor response spectra usually occur near the vibration periods of the whole structure, among which the first two peaks stand out; In most cases, the acceleration amplification effect on substructures tends to be more evident when the construction site is farther from the fault rupture; On the other hand, the acceleration response of substructures can be effectively reduced with an appropriate increase in the mass ratio of the main-sub structure and the damping ratio of the substructures; However, the frequency ratio of the main-sub structure has no discernible effect on the floor response spectra. This study investigates the characteristics of the floor response spectrum of the novel timber-concrete structure, which supports the future applications of such hybrid structure in high-rise buildings.

• 천문학논총
• /
• 제30권2호
• /
• pp.61-64
• /
• 2015

The brightness of Io's magnetic footprint, an indicator of electromagnetic interaction at the satellite, appears to be strongly connected to the satellite's distance from the plasma equator. As a result, the brightest footprints were detected when Io is near the interception location between the satellite's orbital plane and the plasma equator. However, volcanic activities on Io show strong correlation with the equatorward shift of Jupiter's main auroral oval, consequently causing the disappearance of Io's footprint. The same conclusion was suggested via the observation of Jupiter's hectometric radio emission, called HOM, which closely corresponds to Jupiter's auroral activity. The plasma environment near the Jovian satellites was found to vary significantly at different observational epochs. The electron density increased by approximately a factor of three from the Voyager epoch (1979) to the Galileo epoch (1995), while the electron density was found to be significantly higher (~ 5 times) in the Cassini epoch (2001). In this current study, the magnetic footprints were clearly brighter ten years ago (from peak brightness in 1998-2001) than the footprints detected in 2007. For volcanic activities on Io in 2007, there are two clear activities in February and late May. The magnetic footprint appeared to be dimmer in March 2007, expected to be the result of volcano activities in Feb 2007. However, the magnetic footprint brightness in June appeared to be slightly brighter than the footprints observed in May. The reason could be the time delay between the brightening of the sodium nebula on approximately May 31st and, a while later, the enhancement of flux tube content peaking on approximately June 5th. On the other hand, Io's magnetic footprints were observed during June 1st - 10th when they may not yet have been affected by the increase in mass outflow due to the increase of plasma density.