• 설비공학논문집
• /
• 제24권6호
• /
• pp.521-537
• /
• 2012

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2011. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of fluid machinery and fluid flow, thermodynamic cycle, and new and renewable energy. Various topics were presented in the field of fluid machinery and fluid flow. Research issues mainly focused on the rankine cycle in the field of thermodynamic cycle. In the new and renewable energy area, researches were presented on geothermal energy, fuel cell, biogas, reformer, solar water heating system, and metane hydration. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, nanofluids and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer above liquid helium surface in a cryostat, methane hydrate formation, heat and mass transfer in a liquid desiccant dehumidifier, thermoelectric air-cooling system, heat transfer in multiple slot impinging jet, and heat transfer enhancement by protrusion-in-dimples. In the area of pool boiling and condensing heat transfer, researches on pool boiling of water in low-fin and turbo-B surfaces, pool boiling of R245a, convective boiling two-phase flow in trapezoidal microchannels, condensing of FC-72 on pin-finned surfaces, and natural circulation vertical evaporator were actively performed. In the area of nanofluids, thermal characteristics of heat pipes using water-based MWCNT nanofluids and the thermal conductivity and viscosity were measured. In the area of industrial heat exchangers, researches on fin-tube heat exchangers for waste gas heat recovery and Chevron type plate heat exchanger were implemented. (3) Refrigeration systems with alternative refrigerants such as $CO_2$, hydrocarbons, and mixed refrigerants were studied. Heating performance improvement of heat pump systems were tried applying supplementary components such as a refrigerant heater or a solar collector. The effects of frost growth were studied on the operation characteristic of refrigeration systems and the energy performance of various defrost methods were evaluated. The current situation of the domestic cold storage facilities was analyzed and the future demand was predicted. (4) In building mechanical system fields, a variety of studies were conducted to achieve effective consumption of heat and maximize efficiency of heat in buildings. Various researches were performed to maximize performance of mechanical devices and optimize the operation of HVAC systems. (5) In the fields of architectural environment and energy, diverse purposes of studies were conducted such as indoor environment, building energy, and renewable energy. In particular, renewable energy and building energy-related researches have mainly been studied as reflecting the global interests. In addition, various researches have been performed for reducing cooling load in a building using spot exhaust air, natural ventilation and energy efficiency systems.

• 대한방사선기술학회지:방사선기술과학
• /
• 제33권2호
• /
• pp.109-120
• /
• 2010

치과 X선 검사 시 환자선량의 권고량 가이드라인을 개발하기 위해서 우선 국내 치과방사 선의 현황 및 이용 실태를 설문조사하여 비교분석하였다. 응답을 받은 77곳의 치과병 의원 중에서 치과대학이 있는 치과대학병원을 A그룹(11곳), 치과대학이 없는 대학병원을 포함한 치과병원을 B그룹(30곳), 치과의원을 C그룹(36곳)으로 분류하였다. 그룹별로 분석한 결과는 다음과 같았다. 치과병 의원 한 곳당 평균 unit chairs수는 A그룹 140.2개, B그룹 15.3개, C그룹 5.8개, 평균치과의사수는 A그룹 112.6명, B그룹 7.3명, C그룹 1.7명, 평균방사선사수는 A그룹 3.1명, B그룹 0.5명, C그룹에는 한 명도 없었고, 평균치과위생사수는 A그룹 19.7명, B그룹 12.5명, C그룹 3.3명이었다. 설치된 치과용 X선장치의 평균보유수는 A그룹 14.64대, B그룹 3.21대, C그룹 2.19대로 나타났다. 이 중에서 구내촬영장치가 가장 많았고, 다음은 파노라마 장치, 세팔로 장치, CBCT 장치 순이었으며, 장치시스템의 비율은 세 그룹 모두 DR 시스템이 50% 이상으로 가장 많았다. 필름 시스템인 경우, 사용된 구내필름은 감광도가 높은 Insight 필름(Kodak, USA)이 대부분이었으며, 자동 현상기는 사용하는 곳이 적었으나, 필름유지기구는 사용하는 곳이 약간 많았다. PACS 이용률은 A그룹 90.9%, B그룹 83.3%, C그룹 16.7%이었고, 프로그램은 국내의 Infinitt에서 개발된 PiView STAR가 가장 많이 이용되고 있었다. 치과병 의원 한 곳당 2008년도의 연간 평균촬영건수는 A그룹이 B그룹보다 6.8배, C그룹보다 21.2배 더 많았으며, 구내 치근단 촬영과 파노라마 촬영이 대부분이었다. 구내 치근단 촬영 시 관전압과 관전류는 세 그룹 모두 비슷하였으나, 노출시간은 C그룹이 A그룹의 12배, B 그룹의 3.5배 정도 길었다. 즉, 대부분 치과위생사가 촬영하고 있는 C그룹에서는 방사선 노출량이 다른 그룹에 비해 훨씬 많았다. 그러나 파노라마촬영 시의 조건은 세 그룹에서 큰 차이가 없었다. 결론적으로, 촬영조건은 경험적 지식을 따르기보다는 권장량을 사용해야 하며, 필름시스템에서는 자동현상기와 필름유지기구를 사용하여 방사선의 노출량을 줄여준다. 또한 환자선량의 감소와 X선 영상의 질 향상을위해서 X선발생장치 및 관련기기의 체계적인 정도관리가 반드시 필요하다.

• 설비공학논문집
• /
• 제29권6호
• /
• pp.327-340
• /
• 2017

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

• 설비공학논문집
• /
• 제14권12호
• /
• pp.1102-1139
• /
• 2002

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2000 and 2001 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation of facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat, humidity was also interesting for comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing topics. Well developed CFD technologies were widely applied for developing facilities and their systems. (2) Most of papers related with heat transfer analysis and heat exchanger shows dealt with convection, evaporation, and channel flow for the design application of heat exchanger. The numerical heat transfer simulation studies have been peformed and reported to show heat transfer characteristics. Experimental as well as numerical studies on heat exchanger were reported, while not many papers are available for the system analysis including heat exchanger. (3) A review of the recent studies on heat pump system shows that performance analysis and control of heat pump have been peformed by various simulations and experiments. The research papers on multi-type heat pump system increased significantly. The studies on heat pipe have been examined experimently for change of working characteristics and strut lure. Research on the phase change has been carried out steadily and operation strategies of encapsulated ice storage tank are reported experimentally in several papers. (4) A review of recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. Evaporation and condensation heat transfer characteristics are investigated for tube shapes and new alternative refrigerants. Studies on components of refrigeration/air conditioning system are carried to examine efficiency for various compressors and performance of new expansion devices. In addition to thermophysical properties of refrigerant mixtures, studies on new refrigerants are also carried out, however research works on two-phase flow seemed to be insufficient. (5) A review of the recent studies on absorption cooling system indicates that heat and mass transfer phenomena have been investigated to improve absorber performance. Various experimental data have been presented and several simulation models have been proposed. A review of the recent studies on duct and ventilation shows that ventilation indices have been proposed to quantify the ventilation performance in buildings and tunnels. Main efforts have been focused on the applications of ventilation effectiveness in practice, either numerically using computational fluid dynamics or experimentally using tracer gas techniques. (6) Based on a review of recent studies on indoor thermal environment and building service systems, research issues have mainly focused on many innovative ideas such as underfloor air-conditioning system, personal environmental modules, radiant floor cooling and etc. Also, the new approaches for minimizing energy consumption as well as improving indoor environmental conditions through predictive control of HVAC systems, various activities of building energy management and cost-benefit analysis for economic evaluation were highlighted.

• Advances in pediatric surgery
• /
• 제1권2호
• /
• pp.149-161
• /
• 1995

국내에서 처음으로 기관식도기형에 관하여 대한소아외과 학회 회원을 대상으로 조사하였다. 본 연구는 두 부분으로 구성되어 있었는데 하나는 최근 3년간 출생한 기관식도기형의 등록된 자료를 분석하여 국내의 기관식도기형의 현황 즉 발병율 처치 및 치료 결과등에 관한 총체적인 경향을 외국과 비교 분석하여 우리 자료와 구미 보고와의 차별성 및 유사성을 분석하고저 했으며, 다른 하나는 질문서(questionnaires) 분석을 토대로 11차 대한소아외과학회 학술대회에서 토의된 내용을 기초로 회원들의 식도기형의 진단 치료, 술후 관리, 합병증 등에 대한 경험과 의견을 종합하여 고안을 작성하였다.

• 한국농공학회지
• /
• 제13권2호
• /
• pp.2262-2275
• /
• 1971

조사대상은 전라북도 관내 토지개량 조합 저수지 14개소와 전라남도관내 토지개량 조합저수지 20개소에 대하여 저수량 및 토사매몰량을 실측조사하고 또한 두 도내에 산재하여 있는 소류지 3,347개소에 대하여는 해당 시군에 비치된 대장에 의하여 조사하였다. 그 결과를 요약하면 다음과 같다. 1. 저수지 유역의 임상이 저수지 설치당시에는 대부분 산림이 울창하여 양호하였든 것이 8.15 해방과 6.25동란으로 주민들의 도벌과 남벌로 인하여 거의 황폐되었으며 또 유역내의 토사유출과 저수지내에 유사침전이 심하게 되어 유역면적 1ha당 연평균 $10.63m^3$의 토사침적을 보게 되었다. 2. 이 결과는 평균 27.5%의 저수량 감소를 초래하게 된 것이다. 특히 소류지는 계획당시에는 단위 저수량이 평균 0.19hm로 판명되었는데 이는 원래부터 저수량이 부족한데다가 다년간의 토사 매몰로 인하여 더욱 부족하게 되었다. 3. 평소의 유지관리 상황이 매우 소홀하여서 제방누수 산지 불임부의 누수 통관누수 등이 있는데도 불구하고 개보수를 하지 않고 방치한 곳도 있다. 4. 한발시에 준설한 곳도 있기는 하나 그 준설토사를 저수지 안에 쌓두어 환원된 예도 있었다. 5. 일반농민이 용수를 낭비하는 경향이 많었다. 이상과 같은 실정이므로 수자원 보완책으로서 다음과 같은 방안을 채택할 것을 당국에 건의하는 바이다. (1) 벼가 생육기별로 요구하는 최소한의 용수량만을 관계하는 절수재배를 여행한 것. (2) 용수가 극히 부족한 지방에서는 답토양의 수분을 70% 정도로 유지시키도록 수일간에 한번씩 소량으로 관계하는 계획관개를 실행한 것. (3) 지하수 복류수를 최대한 이용할 수 있도록 지구안에 관정을 굴착할 것. (4) 지구안에 보가 설치되어 있는 곳에서는 집수정을 병설하여 한발시에는 복류수를 양수하여 관개에 이용할 것. (5) 저수지 유역내의 산림은 이를 일체 보안림에 편입시켜서 조림 사방 야계등 공사를 우선적으로 실시하여 수원함양에 주력할 것. (6) 못자리는 집단식을 채택하고 묘대용수는 자체 해경을 원칙으로 할 것. (7) 매몰된 토사는 될 수록 준설하여 계획 저수량을 확보한다. (8) 하천이 저수지로 흘러들어가는 어구에는 웨이어를 설치하여 유입토사를 사전에 처리할 것. (9) 물넘이의 표고는 입지 조건에 따라 자동식 구조로하여 올리되 홍수위는 올리지 않고 홍수시에는 수위가 강하되어 재방을 덧쌓거나 용지매수를 하지 않고서도 저수량을 증대하는 방안을 모색할 것.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.5-5
• /
• 2011

The research and development of hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV) and electric vehicle (EV) are intensified due to the energy crisis and environmental concerns. In order to meet the challenging requirements of powering HEV, PHEV and EV, the current lithium battery technology needs to be significantly improved in terms of the cost, safety, power and energy density, as well as the calendar and cycle life. One new technology being developed is the utilization of composite cathode by mixing two different types of insertion compounds [e.g., spinel $LiMn_2O_4$ and layered $LiMO_2$ (M=Ni, Co, and Mn)]. Recently, some studies on mixing two different types of cathode materials to make a composite cathode have been reported, which were aimed at reducing cost and improving self-discharge. Numata et al. reported that when stored in a sealed can together with electrolyte at $80^{\circ}C$ for 10 days, the concentrations of both HF and $Mn^{2+}$ were lower in the can containing $LiMn_2O_4$ blended with $LiNi_{0.8}Co_{0.2}O_2$ than that containing $LiMn_2O_4$ only. That reports clearly showed that this blending technique can prevent the decline in capacity caused by cycling or storage at elevated temperatures. However, not much work has been reported on the charge-discharge characteristics and related structural phase transitions for these composite cathodes. In this presentation, we will report our in situ x-ray diffraction studies on this mixed composite cathode material during charge-discharge cycling. The mixed cathodes were incorporated into in situ XRD cells with a Li foil anode, a Celgard separator, and a 1M $LiPF_6$ electrolyte in a 1 : 1 EC : DMC solvent (LP 30 from EM Industries, Inc.). For in situ XRD cell, Mylar windows were used as has been described in detail elsewhere. All of these in situ XRD spectra were collected on beam line X18A at National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory using two different detectors. One is a conventional scintillation detector with data collection at 0.02 degree in two theta angle for each step. The other is a wide angle position sensitive detector (PSD). The wavelengths used were 1.1950 ${\AA}$ for the scintillation detector and 0.9999 A for the PSD. The newly installed PSD at beam line X18A of NSLS can collect XRD patterns as short as a few minutes covering $90^{\circ}$ of two theta angles simultaneously with good signal to noise ratio. It significantly reduced the data collection time for each scan, giving us a great advantage in studying the phase transition in real time. The two theta angles of all the XRD spectra presented in this paper have been recalculated and converted to corresponding angles for ${\lambda}=1.54\;{\AA}$, which is the wavelength of conventional x-ray tube source with Cu-$k{\alpha}$ radiation, for easy comparison with data in other literatures. The structural changes of the composite cathode made by mixing spinel $LiMn_2O_4$ and layered $Li-Ni_{1/3}Co_{1/3}Mn_{1/3}O_2$ in 1 : 1 wt% in both Li-half and Li-ion cells during charge/discharge are studied by in situ XRD. During the first charge up to ~5.2 V vs. $Li/Li^+$, the in situ XRD spectra for the composite cathode in the Li-half cell track the structural changes of each component. At the early stage of charge, the lithium extraction takes place in the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component only. When the cell voltage reaches at ~4.0 V vs. $Li/Li^+$, lithium extraction from the spinel $LiMn_2O_4$ component starts and becomes the major contributor for the cell capacity due to the higher rate capability of $LiMn_2O_4$. When the voltage passed 4.3 V, the major structural changes are from the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, while the $LiMn_2O_4$ component is almost unchanged. In the Li-ion cell using a MCMB anode and a composite cathode cycled between 2.5 V and 4.2 V, the structural changes are dominated by the spinel $LiMn_2O_4$ component, with much less changes in the layered $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, comparing with the Li-half cell results. These results give us valuable information about the structural changes relating to the contributions of each individual component to the cell capacity at certain charge/discharge state, which are helpful in designing and optimizing the composite cathode using spinel- and layered-type materials for Li-ion battery research. More detailed discussion will be presented at the meeting.

• Journal of Chest Surgery
• /
• 제40권7호
• /
• pp.485-491
• /
• 2007

배경: 비록 흉강의 용적을 감소시키는 과정으로 100여 년 동안 광범위하게 이용하였지만 흉곽성형수술은 현재로는 희귀하게 되었다. 그러나 현재에도 저자는 20명의 환자에서 폐부분절제와 더불어 또는 후에 변형흉곽성형수술을 시행하였다. 이 연구의 목적은 변형흉곽성형수술의 조기와 만기 임상결과와 의의를 평가하기 위해서 시행하였다. 대상 및 방법: 1995년 3월부터 2005 6월까지, 감소된 폐 용적을 받아들일 수 있도록 흉강을 개형하거나 폐부분절제에 이어서 발생한 지속적인 공기누출에 의한 빈 공간을 폐쇄하기 위해서 총 298 폐부분절제술 환자 중 20명에서 폐부분절제술과 더불어서 또는 이어서 변형흉곽성형수술을 시행하였다. 20명의 환자 중 14명은 폐부분절제와 더불어서 변형흉곽성형수술을 시행하였고, 나머지 6명의 환자는 폐부분절제 후에 시행하였다. 나이는 24세에서 77세까지 (평균 $59.1{\pm}6.4$세)였고 남자가 17 : 3으로 많았고 좌우는 동수였다. 술 전 최초의 기저질환은 폐암이 7예, 거대 수 포성변화를 보이는 기흉 6예, 기관지확장증 2예, 또한 과거 폐결핵력을 갖고 있는 국균증 2예 그리고 농흉과 섬유흉을 보이는 2예, 나머지 1예는 이전의 흥부좌상에 의한 다발성 폐 농양과 폐 파손 1예였다. 수술방법은 폐상부박리수술과 첫 번째 늑골을 보존하고, 2, 3, 4번 늑골의 골막하절제술(늑골의 늑연골 접합부터 후부까지)그리고 전 흉부의 탄력붕대와 솜 뭉치에 의한 압박이었다. 결과: 흉곽성형수술 후 평균 공기누출은 $16{\pm}0.2$일($0{\sim}7$일), 흉관 거치기간은 7일($5{\sim}11$일)이었으며 평균 입원 일은 $19{\pm}2.8$일($8{\sim}47$일)이었다. 수술의 합병증은 폐부분절제와 더불어 흉곽성형수술환자에서는 상처감염 2예, 폐염 2예, 재개흉 1예였으며, 폐부분절제 후 흉곽성형수술환자에서 상처감염 1예이었다. 사망은 조기사망 1예 그리고 만기사망은 4예였다. 결론: 변형흉곽성형수술은 선택된 환자에서 폐부분절제와 함께 또는 이어서 시행함으로써 받아들일 만한 미용결과와 더불어서 감소된 폐용적을 적응하기 위해서나 지속적인 늑막의 공간이 기대되는 환자에서 빈 공간을 폐쇄하기 위해서 시행할 수도 있다고 결론을 내렸다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제8권2호
• /
• pp.21-28
• /
• 1985

We serveyed the actual condition of business of the departments of radiology of 45 health conters (except 3) in the area of Seoul, Kyungki and Inchon from March, 1984 to November, 1984. The results are summarized as follows : 1. T.O. of the radiologic technologist is three persons in each health center of Seoul area, and one person in each one of Kyungki and Inchon area. P.O. is 2-5 persons in Seoul area, 1-2 persons in Kyungki or Inchon area. 2. The number of all the radiologic technologists employed now is 75 persons, and among all of them, when analized by position class 7th is 54.7%, class 8th 28.0%, class 9th is 13.3%, and class 6th is 2.7%, and by sex, female is 68.0%, male is 32.0%, by educational background, for the most part, junior college graduates come to 73.3%, by age group 60% of them is in their twenties, 16.0% is in their thirties and forties, 8.0% is in their fifties, and by career after certificate 60% have the career of 1-5 years, 13.3% have the one of 6-7 years or mor than 21 years, and 6.7% have the one of 11-15 years of 16-20 years. 3. All the diagnostic x-ray equipment being kept is 62, and among them flxing equipment is 71.0%, portable equipment is 29.0% and by rating of X-ray equipment, maximum tube current 100 mA is 46.8%, maximum KV 100KVP is 72.6%, the most part. 4. Photofluorographic camera and hood are equipped in every health center. While, as to the radiographic cassettes, $14{\times}14"$ cassetts are equipped in every health center, but cassettes of other sizes are in half of them. 5. Bucky's table is equipped in 11.9% health centers, the automatic processor is in 21.4%, the photofluorographic film changer is 9.5%, the grid is 73.8%, the protective apron is in 88.1%, and the protective glove is in 57.1% health centers. 6. The number of the people who got the x-ray examination for one year (by the year 1989) is the most, 1,000-6,000 in direct radiography of the chest, or 15,0001-45,000 in the health centers of Seoul area, 5,000-20,000 in Kyungki and Inchon area in photofluorography of the chest. Moreover, other radiographies are being taken extremely limitedly in all health centers. 7. In processing types of x-ray film, automatic processing is used in 9 health centers (21.4%), manual tank processing is in 30 (71.4%), and manual tray processing in 3 (7.2%). 8. As for collimation of x-ray exposure field, "continual using restricted by a subject size" has the most part, 78.6% "restricted using at every radiography" has 19%, and the case of "never considered" has 2.4% response. 9. As for the dosimeter used for radiation control, film badge (35.7%) and pocket dosimeter (26.2%) are used, and in 38.1% health centers the dosimeter is not equipped at all. Consideration of the previous radiation exposure is being done in only one health center. 10. Reading of radiographs is mainly depended on the radiologists electively (45.2%) or on the genral practitioners(45.2%).

• 핵의학기술
• /
• 제16권2호
• /
• pp.25-28
• /
• 2012

PET/CT에서의 환자의 피폭선량을 줄이기 위한 많은 연구가 진행되고 있다. 본 연구는 2012년 2월부터 2012년 3월까지 PET/CT검사를 위해 본원 핵의학과에 내원한 환자 149명(평균연령 $58{\pm}12.4$세)을 대상으로 하였고 장비는 Biograph True Point 40 (Siemens, USA)과 Gemini TF 64 (Philips, Cleveland)를 사용하였다. SIEMENS사의 Care Dose 4D를 사용하여 75명의 환자를 BMI 지수에 따라 세 집단으로 나누어 선량 감소율과 CTDI를 측정하였고 PHILIPS사의 D-dom을 이용하여 74명의 환자를 세 집단으로 나누어 선량 감소율과 CTDI를 측정하였다. 각 장비별로 세 집단 간의 측정값들이 유의한 차이를 보이는지 알아보기 위하여 SPSS Ver.18.0 통계분석프로그램을 이용하였다. 각각의 집단별로 평균값을 비교한 결과 Care Dose 4D를 사용했을 때 선량 감소율, CTDI 모두 p-value가 0.000으로서 통계적으로 유의한 차이가 있었다. D-dom을 사용했을 때 집단 간의 p-value는 선량 감소율 0.284, CTDI 0.226으로서 p>0.05이므로 집단 간의 유의한 차이가 없었다. 집단별로 평균 선량 감소율과 CTDI를 분석한 결과 Care Dose 4D를 사용했을 때 각각 정상집단에서 53.4%, 5.3 mGy, 과체중집단에서 49.5%, 5.8 mGy, 비만 집단에서 42.0%, 6.6 mGy로 나타났다. 반면에 D-dom을 사용하였을 때는 각각 정상 집단에서 22.7%, 4.5 mGy, 과체중 집단에서 22.1%, 4.6 mGy, 비만 집단에서 22.9%. 4.5 mGy로 나타났다. D-dom의 원리인 투사각도에 따른 선량조절은 환자의 비만도에 영향이 많지 않음을 알 수 있었다. 그리고 Care Dose 4D의 경우에는 투사각도에 따른 선량조절뿐만 아니라 환자 장축의 감쇠계수에 따른 선량조절, 환자 사이즈에 따른 선량조절 원리를 사용하고 있다. 그러므로 환자 장축의 감쇠계수에 따른 선량조절과 환자 크기에 따른 선량조절 원리가 환자의 비만도에 영향이 있다고 생각된다. 비록 같은 BMI 집단 간에 환자의 체형에 따른 오차가 있다고 여겨지지만, 앞으로 더욱더 많은 연구가 이루어진다면 Dose Modulation Technic이 PET/CT검사에서 환자의 피폭선량을 줄이는데 많은 도움이 될 것으로 생각된다.