• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.1
• /
• pp.23-32
• /
• 2016

Various studies have been conducted for drag reduction of a high-speed vehicle by injecting counterflow jet from its nose cone. In this study, in order to obtain baseline data and key parameters for drag reduction method, the counterflow jet study of the USA is reviewed and summarized. The nose cone shapes of each study are hemisphere cylinder, truncated cone, and reentry capsule, and their test conditions are summarized accordingly. Key parameters for drag reduction are jet mach number, mass flow rate, and pressure ratio. Even though drag reduction effects show various results according to given test conditions, it is found that the drag reduction effect reaches up to 40~50%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.235.1-235.1
• /
• 2015

Artificially-engineered materials, whose electromagnetic properties are not available in nature, such as negative reflective index, are called metamaterials (MMs). Although many scientists have investigated MMs for negative-reflective-index properties at the beginning, their interests have been extended to many other fields comprising perfect lenses. Among various kinds of MMs, metamaterial absorbers (MM-As) mimic the blackbody through minimizing transmission and reflection. In order to maximize absorption, the real and the imaginary parts of the permittivity and permeability of MM-As should be adjusted to possess the same impedance as that of free space. We propose a dual-wide-band and polarization-independent MM-A. It is basically a triple-layer structure made of metal/dielectric multilayered truncated cones. The multilayered truncated cones are periodically arranged and play a role of meta-atoms. We realize not only a wide-band absorption, which utilizes the fundamental magnetic resonances, but also another wide-band absorption in the high-frequency range based on the third-harmonic resonances, in both simulation and experiment. In simulation, the absorption bands with absorption higher than 90% are 3.93 - 6.05 GHz and 11.64 - 14.55 GHz, while the experimental absorption bands are in 3.88 - 6.08 GHz and 9.95 - 13.84 GHz. The physical origins of these absorption bands are elucidated. Additionally, it is also polarization-independent because of its circularly symmetric structures. Our design is scalable to smaller size for the infrared and the visible ranges.

• Imaging Science in Dentistry
• /
• v.50 no.2
• /
• pp.125-132
• /
• 2020

Purpose: The positions of the mandibular foramen (MnF) and the lingula affect the success rate of inferior alveolar nerve block. The objective of this study was to investigate aspects of the MnF and the lingula relevant for mandibular block anesthesia using cone-beam computed tomography (CBCT). Materials and Methods: Fifty CBCT scans were collected from a picture archiving and communications system. All scans were taken using an Alphard Vega 3030 (Asahi Roentgen Co. Ltd., Kyoto, Japan). Fifty-eight MnFs of 30 subjects were included in the study. The position of the MnF, the size of the MnF, the position of the lingula, the size of the lingula, and the shape of the lingula were measured and recorded. All data were statistically analyzed at a significance level of P<0.05. Results: The position of MnF was 0.1 mm and 0.8 mm below the occlusal plane in males and females, respectively. The horizontal position of the MnF was slightly anterior to the center of the ramus in males and in the center in females (P<0.05). The vertical position of the MnF was lower in females than in males(P<0.05). The MnF was an oval shape with a longer anteroposterior dimension. The height of the lingula was 9.3 mm in males and 8.2 mm in females. The nodular type was the most common shape of the lingula, followed by the triangular, truncated, and assimilated types. Conclusion: CBCT provided useful information about the MnF and lingula. This information could improve the success rate of mandibular blocks.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.479-490
• /
• 2020

The hydrodynamic characteristic of transonic motion projectiles with different head diameters are investigated by numerical simulation. Compressibility effect in liquid-phase water are modeled using the Tait state equation. The result shows that with increasing of velocity the compression waves transfer to shock waves, which cause the significant increasing of pressure and decreasing the dimensions of supercavities. While the increasing of head diameter, the thickness, the vapor volume fraction and the drag coefficient of supercavities are all enhanced, which is conducive to the stability of transonic-speed projectiles. The cavity dynamics of the different head projectiles are compared, and the results shows when Mach number is in high region, the truncated cone head projectile is enveloped by a cavity which results in less drag and better stability.

• Steel and Composite Structures
• /
• v.26 no.6
• /
• pp.771-791
• /
• 2018

This paper deals with the low velocity impact response and dynamic stresses of composite sandwich truncated conical shells (STCS) with compressible or incompressible core. Impacts are assumed to occur normally over the top face-sheet and the interaction between the impactor and the structure is simulated using a new equivalent three-degree-of-freedom (TDOF) spring-mass-damper (SMD) model. The displacement fields of core and face sheets are considered by higher order and first order shear deformation theory (FSDT), respectively. Considering continuity boundary conditions between the layers, the motion equations are derived based on Hamilton's principal incorporating the curvature, in-plane stress of the core and the structural damping effects based on Kelvin-Voigt model. In order to obtain the contact force, the displacement histories and the dynamic stresses, the differential quadrature method (DQM) is used. The effects of different parameters such as number of the layers of the face sheets, boundary conditions, semi vertex angle of the cone, impact velocity of impactor, trapezoidal shape and in-plane stresses of the core are examined on the low velocity impact response of STCS. Comparison of the present results with those reported by other researchers, confirms the accuracy of the present method. Numerical results show that increasing the impact velocity of the impactor yields to increases in the maximum contact force and deflection, while the contact duration is decreased. In addition, the normal stresses induced in top layer are higher than bottom layer since the top layer is subjected to impact load. Furthermore, with considering structural damping, the contact force and dynamic deflection decrees.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.221-221
• /
• 2013

Vertical LED (VLED) has been recognized as a way to obtain the high-power LED due to their advantages [1]. However, approximately 4% of the light generated from the active region is extracted, if the light extraction from side walls and back side is neglected because of Fresnel reflection (FR) and total internal reflection (TIR) [2,3]. In this study, the optical simulation of the VLED with the various microstructures was performed. Among them, the microlens having the diameter of 3 ${\mu}m$ and the height of 1.5 ${\mu}m$ shown the best result was chosen, and then, optimized microlens was formed on a GaN template using conventional semiconductor process. Various microstructures were proposed to improve the light extraction efficiency (LEE) of the VLED for the simulation. The LEE was simulated using LightTools based on a Monte Carlo ray tracing. The microstructures with hemisphere, cone, truncated and cylinder pattern having diameter of 3 ${\mu}m$ were employed on the top layer of the VLED respectively. The improvement of the LEE by using the microstructure is 87% for the hemisphere, 77% for the cone, 53% for the truncated, 21% for the cylinder, compared with the LEE of the flat surface at the reflectance of 85%. The LEE was increased by 88% at the height of 1.5 ${\mu}m$, compared with the LEE of the flat surface. We found that the microlens on the top layer is the most suitable for increasing the LEE. In order to apply the proposed microlens on n-GaN surface, we fabricated microlens on a GaN template. A photoresist array having hexagonal-closed packed microlens was fabricated on the GaN template. Then, optimization of etching the GaN template was performed using a dry etching process with ICP-RIE. The dry etching carried out using a gas mixture of Cl2 and Ar, each having a flow rate of 16 sccm and 10 sccm, respectively with RF power of 50 W, ICP power of 900 W and chamber pressure of 2 mTorr was the optimum etching condition as shown in Fig. 2(a).

• Steel and Composite Structures
• /
• v.16 no.4
• /
• pp.375-387
• /
• 2014

The purpose of this paper is to propose a method for evaluation of varying stiffness coefficients of tailored conical shells (TCS). Furthermore, a comparison between buckling loads of these shells under axial load with the different fiber path is performed. A circular truncated conical shell subjected to axial compression is taken into account. Three different theoretical path containing geodesic path, constant curvature path and constant angle path has been considered to describe the angle variation along the cone length, along cone generator of a conical shell are offered. In the TCS with the arbitrary fiber path, the thickness and the ply orientation are assumed to be functions of the shell coordinates and influencing stiffness coefficients of the structure. The stiffness coefficients and the buckling loads of shells are calculated basing on classical shells theory (CST) and using finite-element analysis (FEA) software. The obtained results for TCS with arbitrary fiber path, thickness and ply orientation are derived as functions of shell longitudinal coordinate and influencing stiffness coefficients of structures. Furthermore, the buckling loads based on fiber path and ply orientation at the start of tailored fiber get to be different. The extent of difference for tailored fiber with start angle lower than 20 degrees is not significant. The results in this paper show that using tailored fiber placement could be applied for producing conical shells in order to have greater buckling strengths and lower weight. This work demonstrates the use of fiber path definitions for calculated stiffness coefficients and buckling loads of conical shells.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.282.2-282.2
• /
• 2016

중적외선 물질에는 Ge, ZnS, ZnSe, Si 등이 있으나 고굴절율이므로 반사가 매우 크게 발생을 한다. 이를 줄이기 위해 다층 박막 무반사 코팅을 일반적으로 사용하지만 열에 취약함, 적합한 물질을 찾는 것이 매우 어려움, 다층 박막으로 제작 시 두께가 매우 두꺼워짐의 단점이 있다. 또한 Ge, ZnS, ZnSe 의 소재는 가격이 Silicon에 비해 매우 비싸다. 그러므로 RCWA(Rigorous Coupled Wavelength Analysis) 시뮬레이션을 이용하여 상대적으로 저렴한 소재임에도 고투과성을 지닌 중적외선용 무반사 실리콘 서브파장구조(Subwavelength Structures, SWSs)를 제안한다. 본 연구에서는 원기둥, 원뿔, 파라볼라, 잘린 원뿔(truncated cone) 등의 형태에 따른 투과율 특성을 파악하여 최적구조가 파라볼라 형태임을 증명하였다. 또한 서브파장구조의 주기, 높이의 특성을 조절하여 공정 시의 종횡비(Aspect ratio)를 고려한 최적형태를 제안하였다. 중적외선 영역($3{\mu}m{\sim}5{\mu}m$)에서 일반 Silicon의 적외선 영역에서 평균 55%의 낮은 투과율을 보이나, 양면에 무반사 구조를 설계 하였을 때 평균 94%의 높은 투과율을 확인할 수 있다. 다양한 형태를 가진 무반사 실리콘 서브파장 구조물을 RCWA 방식으로 계산함으로서 특성을 파악하며 최적구조를 설계 할 수 있다. 또한 단면에 비하여 양면으로 SWSs 구조를 제작할 시 매우 두드러지는 투과특성을 확인할 수 있다. 고굴절율이지만 뛰어난 투과특성을 이용하여 초소형 적외선 카메라 렌즈 뿐만 아니라 적외선 광검출기, 광학 필터 등에 이용 가능할 것으로 예상된다.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.3
• /
• pp.61-66
• /
• 1998

Cyclodextrin are obtained from starch by enzymatic degradation. The three best characterize forms are ${\alpha}$, ${\beta}$, ${\gamma}$ cyclodextrin consisting of 6, 7, and 8 D-glucose units, respectively. Each of the glucose units are in the rigid C1 chair conformation and are linked by ${\alpha}$ 1,4 bonds. This geometry gives the cyclodextrin the shape of a hollow truncated cone with the wider side formed by the secondary 2- and 3-hydroxy groups and the narrower side by the primary 6-hydroxy group. The most characteristics property of the cyclodextrin is their ability to form inclusion complexes with a wide range of guest moleculars. We syntheses per-6-substituted ${\beta}$-cyclodextrin derivatives and investigate structures, spectrospcopic properties. The substituted materials are piperidine, piperazin, morphorine. The synthetic compound showed a good solubility than natural ${\beta}$ cyclodextrin in organic solvents such as methylene chloride, methanol, ethanol, etc.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.21-24
• /
• 2008

This study proposes a optimized shape of diffuser profile through investigating the scattering and diffusion characteristics of diffusers. The scattering coefficient according to ISO 17497-1 evaluates uniformity of reverberant sound field of late reflections, while the diffusion coefficient according to AES-4id-2001 evaluates polar response of early reflections. Thus both scattering and diffusion characteristics should contribute to design shape of diffusers to maximize physical performance. To find out design method, the previous results on hemisphere diffusers are reviewed. The frequency characteristics of scattering coefficients depended on the structural height of the diffusers, while amount of scattering coefficients depended on the surface coverage density of the diffusers. However absorptive properties also increased with augment of surface coverage density, thus optimum coverage density should be considered. For the directional diffuser, three types of 2D-diffusers are proposed; semicylinder of h=5mm, semi-truncated cone of h=5-25mm and semicylinder of h=25mm. As results, diffusers with the maximum height of 25mm show the highest scattering coefficients, while diffuser of h=5mm shows high scattering coefficients only at the high-frequency bands. Diffusion coefficient will be investigated for diffusive properties of the early reflection.