• Reproductive and Developmental Biology
• /
• v.36 no.2
• /
• pp.103-108
• /
• 2012

Anestrus is one of the most important production limiting disorders in dairy buffaloes and its underlying causes have been a current topic of studies. The objectives of this study were to explore the causes of anestrus in buffaloes with the application of ultrasonography. Two examinations were performed by transrectal ultrasonography at 12 days apart in buffalo cows that were not seen in oestrus at 60 or more days postpartum. As high as 54.5% buffaloes had silent ovulation and 45.5% suffered from the true anestrus with ovarian dysfunction. The duration of anestrus after calving was 60~90, 91~120, 121~180 and 181~365 days in 27%, 32%, 18% and 23% buffalo cows, respectively. Treatment with prostaglandin of cyclic buffalo cows with a corpus luteum (72.7%) resulted in higher estrous rate as compared with close observation of estrus (23.1%) by the farmer (p=0.021). Acyclic buffalo cows without any corpus luteum on ovaries were successfully treated with gonadotropin releasing hormone (70%), resulting in higher estrous detection rate than those treated with a vitamin-mineral mixture (20%) (p=0.035). In conclusion, poor heat detection due to silent ovulation is the most important cause of apparent anoestrus in buffaloes; however the percentage of the true anestrous is also quite high in postpartum buffaloes.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.01a
• /
• pp.47-50
• /
• 2018

본 논문에서는 초음파 영상에서 환자 정보를 제거하여 ROI 영역을 추출하고, 추출된 ROI 영역에서 최대 명암도를 임계치로 설정한 이진화 기법을 적용하여 ROI 영역을 이진화 한다. 이진화된 ROI 영역에서 4 방향 윤곽선 추적 기법을 적용하여 상완동맥 혈류 영역이 존재하는 사다리꼴 형태의 영역을 추출한다. 추출된 사다리꼴 형태의 영역에서 상완동맥 혈류영역을 정확히 추출하기 위하여 제안된 무게 중심법을 이용하여 추출된 후보 영역을 양자화 한다. 무게 중심법은 추출된 사다리꼴 영역에서 FCM 기반 무게중심법과 PCM 기반 무게중심법을 각각 계산한 후, 두 중심 간의 차이가 존재 할 경우에는 두 중심의 평균값을 새로운 무게 중심으로 설정하여 각 픽셀들을 클러스터링하여 상완 동맥 영역을 추출한다. 추출된 상완 동맥 영역에는 고혈압 영역인 빨강색 영역과 저혈압이나 혈류가 역류하는 영역인 파란색 영역이 존재한다. 추출된 상완 동맥 영역에서 고혈압 영역만을 추출하기 위해 빨강색 영역을 제외한 그 외의 영역은 제거한다. 전문의가 제공한 상완동맥 혈류 초음파 영상을 대상으로 TPR(True Positive Rate) 검사을 분석한 결과, 제안된 방법이 기존의 방법 보다 TPR 값이 높게 나타나는 것을 확인하였다.

• Journal of Information Processing Systems
• /
• v.10 no.2
• /
• pp.314-333
• /
• 2014

When analyzing default predictions in real estate companies, the number of non-defaulted cases always greatly exceeds the defaulted ones, which creates the two-class imbalance problem. This lowers the ability of prediction models to distinguish the default sample. In order to avoid this sample selection bias and to improve the prediction model, this paper applies a minority sample generation approach to create new minority samples. The logistic regression, support vector machine (SVM) classification, and neural network (NN) classification use an imbalanced dataset. They were used as benchmarks with a single prediction model that used a balanced dataset corrected by the minority samples generation approach. Instead of using prediction-oriented tests and the overall accuracy, the true positive rate (TPR), the true negative rate (TNR), G-mean, and F-score are used to measure the performance of default prediction models for imbalanced dataset. In this paper, we describe an empirical experiment that used a sampling of 14 default and 315 non-default listed real estate companies in China and report that most results using single prediction models with a balanced dataset generated better results than an imbalanced dataset.

• Journal of Embryo Transfer
• /
• v.33 no.2
• /
• pp.55-59
• /
• 2018

Ensuring timely ovulation concerning the service is valuable. A satisfactory conception rate can be achieved by making sure that ovulation occurs within 7-18 hours after artificial insemination (AI). Delayed ovulation is one of the disturbances commonly encountered in repeat breeding animals. Although demanding research, many studies have not been conducted. Therefore, we aimed to examine the relation between ovulation confirmation and conception rate in dairy cattle. The research findings showed that the signs of true estrus were bred 12 hours after the onset of estrus by AI in cattle. Also, the performance of AI on ovulation was confirmed by the presence of fluctuant Graafian follicles through rectal palpation. From the results, we confirmed that cow encountered delayed ovulation were bred again. The Conception rate in cows with confirmed ovulation was 51.9%, while for those without confirmed ovulation were 33.3%. In conclusion, the results indicate that ovulation confirmation will likely increase conception rate.

• Clinical and Experimental Pediatrics
• /
• v.46 no.4
• /
• pp.400-403
• /
• 2003

Congenital adrenal hyperplasia(CAH) is a recognized cause of precocious pseudopuberty. Some children with CAH also develop true precocious puberty with early maturation of the hypothalamic-pituitary-gonadal axis. We review a case of CAH who eventually developed central precocious puberty nine months after initial treatment with corticosteroid. A 3-year-old boy visited complaining of rapid growth, a large penis and frequent penile erections. This patient was diagnosed with CAH with elevated 17-OH progesterone and cortical hypertrophy of adrenal gland on CT scan. His gonadotropin levels were within the normal prepubertal range. Even on treatment with corticosteroid he grew rapidly and had testicular enlargement, pubic hair development and rapid bone maturation. At second admission, his gonadotropin levels were elevated both basally and in response to LHRH stimulation, suggesting that the CAH led to early activation of pubertal gonadotropin secretion(true precocious puberty). He was treated with monthly depot injections of a LHRH analog in addition to the hydrocortisone. His second sexual characteristics regressed gradually and rate of linear growth and bone maturation decreased.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.8
• /
• pp.1147-1153
• /
• 2000

A total of 9,540 pigs were evaluated for their growth performance to provide information on the development of different feeding strategies to support maximum rate of protein deposition (PD). Large variations in growth performance and protein deposition rate were found in the population used in this study (ADG from 701 to 974 g/day; ADFI from 1,726 to 2,498 g/day; Feed/gain from 2.10 to 2.90; Backfat thickness from 12.4 to 20.5 mm and PD rate from 103 to 153 g/day). It was found that ADG was positively correlated to PD ($R^2=0.9362$, p<0.0001) while FCR was negatively correlated to PD ($R^2=0.4031$, p<0.0001). Backfat thickness was negatively correlated to PD ($R^2=0.7024$, p<0.0001) and to ADG ($R^2=0.5096$, p<0.0001). The estimated lysine requirement based on PD rate also showed large variation (12.37 to 18.38 g/day true ileal digestible lysine on average between 25 and 100 kg), thus strongly indicated the need of separate feeding strategies for each group of pigs. When pigs were divided into three categories according to estimated whole body PD rate, the group of pigs with the highest PD rate grew faster by 6.3 and 13.9% than pigs with intermediate and low PD rate, respectively. Feed utilization was also more efficient in pigs with a high PD rate. It appeared that pigs with high PD rate maintained higher PD rate especially in the later stage of their life. Pigs with high PD rate require an extra amount of 1.2 and 2.4 g/true digestible lysine per day and 0.4 and 0.8% more lysine in the diet than pigs with intermediate and low PD rate during the growing-finishing period respectively. Results of this study suggest that there is a need for separate feeding strategies for individual group of pigs with different PD rate. It should be noted that average value for each group presented in this report is not the adequate amount for an animals potential for maximum PD rate. With recent development in growth modeling and access to computer technologies to facilitate computation, pork producers can easily estimate pigs protein deposition rate and thus can make their own feeding strategies.

• Structural Engineering and Mechanics
• /
• v.6 no.8
• /
• pp.921-937
• /
• 1998

A new four-node degenerated shell element with drilling degrees of freedom (DOF) is proposed. Allman-type displacement approximation is incorporated into the formulation of degenerated shell elements. The approximation improves in-plane performance and eliminates singularities of system matrices resulted from DOF deficiency. Transverse shear locking is circumvented by introducing assumed covariant shear strains. Two kinds of penalty energy are considered in the formulation for the purpose of suppressing spurious modes and representing true drilling rotations. The proposed element can be applied to almost all kinds of shell problems including composite laminated shell structures and folded shell structures. Numerical examples show that the element is of good accuracy and of reasonably fast convergence rate.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.61.1-61.1
• /
• 2018

Outflows are common among local AGNs. Woo et al. (2017) suggested that AGN feedback through outflows is delayed by a dynamical time scale before the suppression of SFR is observationally detected. However, these SFR have large uncertainties because they were estimated by Artificial Neural Network (ANN) method (Ellison et al. 2016). We measured the SFR of 21 far-IR matched sources (z < 0.1) with total IR luminosity from multi-wavelength SED fitting from UV to radio. 15 out of 21 sources were observed with JCMT SCUBA-2 450 and 850um and 4 and 2 sources were matched with archival data of JCMT SCUBA-2 and Herschel SPIRE, respectively. We compared the true SFR by SED fitting with ANN-based one. In addition, we confirmed that sub-mm data are important to determine the SFR with total IR luminosity from SED fitting. Finally, we discuss the significance of true SFR and further the AGN-SF link.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.6
• /
• pp.1521-1530
• /
• 2014

The ROC analysis is considered for multiple class diagnosis. There exist many criteria to find optimal thresholds and measure the accuracy of diagnostic tests for k dimensional ROC analysis. In this paper, we proposed a diagnostic accuracy measure called the correct classification simple rate, which is defined as the summation of true rates for each classification distribution and expressed as a function of summation of sequential true rates for two consecutive distributions. This measure does not weight accuracy across categories by the category prevalence and is comparable across populations for multiple class diagnosis. It is found that this accuracy measure does not only have a relationship with Kolmogorov - Smirnov statistics, but also can be represented as a linear function of some optimal threshold criteria. With these facts, the suggested measure could be applied to test for comparing multiple distributions.

• Metals and materials international
• /
• v.24 no.6
• /
• pp.1249-1255
• /
• 2018

High temperature compression tests for newly developed Al-Zn-Mg alloy were carried out to investigate its hot deformation behavior and obtain deformation processing maps. In the compression tests, cylindrical specimens were deformed at high temperatures ($300-500^{\circ}C$) and strain rates of 0.001-1/s. Using the true stress-true strain curves obtained from the compression tests, processing maps were constructed by evaluating the power dissipation efficiency map and flow instability map. The processing map can be divided into three areas according to the microstructures of the deformed specimens: instability area with flow localization, instability area with mixed grains, and stable area with homogeneous grains resulting from continuous dynamic recrystallization (CDRX). The results suggest that the optimal processing conditions for the Al-Zn-Mg alloy are $450^{\circ}C$ and a strain rate of 0.001/s, having a stable area with homogeneous grains resulting from CDRX.