• 지질공학
• /
• 제32권4호
• /
• pp.597-610
• /
• 2022

중간주응력을 고려한 마찰재료의 파괴거동에 대한 확고한 이해는 대심도 보어홀 안정성 및 단층해석 등과 관련된 현장 적용의 고도화를 위한 필수적인 과정이다. 본 연구는 진삼축압축 조건을 물리적으로 구현하는 장비를 설계·제작하였으며 마찰재료로 제작된 석고 시료에 대한 진삼축압축시험을 통하여 재료의 파괴거동 특성을 논의하고 삼차원파괴함수의 적용성을 검토하였다. 진삼축압축시험을 위한 석고 재료는 52(w) × 52(l) × 104(h) mm의 직육면체 시료로 성형하였으며 다양한 조합의 𝜎₃, 𝜎₂의 조건으로 총 24회의 진삼축압축시험이 수행되었다. 또한, 삼차원 파괴기준식의 파라미터로 사용되는 석고의 강도정수 측정을 위하여 전통적인 일축압축시험 및 삼축압축시험이 수행되었다. 석고 재료의 응력-변형 특성은 중간주응력과 최소주응력의 차이가 클수록 취성거동이 더욱 강하게 나타났으며, 시료의 강도 및 변형은 중간주응력의 변화를 반영하는 것으로 평가되었다. 주응력 좌표계에서 시험 데이터에 대한 비선형 다중회귀분석을 수행한 결과 수정 Wiebols-Cook 파괴기준 및 수정 Lade 파괴기준이 석고 시료에 대한 삼차원 파괴기준으로 가장 적합하였다.

• 한국통신학회논문지
• /
• 제30권3C호
• /
• pp.77-82
• /
• 2005

비터비 알고리즘을 이용한 부분 응답 최대 유사도 (PRML) 검출 방법은 원래의 정보 시퀀스와 가장 유사한 시퀀스를 결정하기 위해 유사도 메트릭 계산 방법이 사용된다. 일반적으로, 트렐리스도에서 각 노드의 가지는 동일한 확률을 갖는다고 가정한다. 그러나, 최소 및 최대 런-길이 구속을 갖는 변조 코드가 사용될 경우, 코드의 특정 패턴에 대한 발생 비율(Ro)은 서로 다르게 되어, 결과적으로 이러한 가정은 틀리게 된다. 본 논문에서는 PRML 검출에 있어 코드의 특정 패턴에 대한 발생 비율을 이용한 유사도 메트릭 계산 방법을 제안한다. 모의 실험에서는 두 종류의 (1, 7) 런-길이 제한 코드에 대해 PR 목표 응답의 차수를 변화시켜 가면서 발생 비율을 계산하였다. 그 결과, 제안한 PRML 검출 방법은 고밀도 자기기록 및 광 기록 채널에서 기존의 PRML 방법과 비교하여 10/sup -5/ BER에서 약 0.5dB 이상의 SNR 성능 이득을 가져옴을 확인하였다.

• 대한통합의학회지
• /
• 제9권4호
• /
• pp.85-89
• /
• 2021

Background : Klippel-Trenaunay-Weber syndrome (KTS) is a rare congenital medical condition characterized by complex vascular malformation. KTS consists of a classic triad of capillary malformation (hemangioma), venous malformations and bone or soft tissue hypertrophy causing limb asymmetry. The aim of this report is to describe management for gait disturbance and foot pain in a Patient with KTS using custom-made total contact insole. Case presentation : A 32-year-old man with KTS presented with a 3-year history of gait disturbance on hard surface due to right first toe pain and Achilles tendon tightness. The patient had soft tissue hypertrophy, varicose veins and port-wine stains over the right lower limb associated with KTS. True leg length discrepancy was 2 cm. We prescribed custom-made total contact insole to protect his deformed foot and correct leg length discrepancy. The insole of right side included wedge shaped heel lift and the insole of left side included full length lift to add extra support on unaffected side. Also, we provided compression stocking and physiotherapy including manual lymphatic drainage for lymphedema and stretching exercise for tightness in right lower extremity. At 3 years follow-up, postural alignment including pelvic obliquity was improved using a custom-made total contact insole. The degree of scoliosis and foot pain were also reduced. Conclusion : An individualized and multidisciplinary approach is essential regarding the complexity of comorbidities in patients with KTS. For patients with KTS, orthotic management should be considered to prevent and correct deformities related to KTS. Active orthotic management, compression stocking and physiotherapy can enhance the quality of life and function in patients.

• 대한기계학회논문집A
• /
• 제24권8호
• /
• pp.1917-1922
• /
• 2000

The split Hokinson pressure bar(SHPB) test has been used to find the mechanical property of materials at high strain rate. A tensile split Hopkinson pressure bar test system is developed and the threaded tensile specimen and the split collar are placed between elastic bars. When the compressive elastic wave generated by a striker is transferred from the transmit bar to the incident bar, some elastic wave is reflected at the threaded parts of the specimen and the transmit bar. This reflected wave can interfere with the transmitted wave. A proper length of elastic bars and the location of strain gage in these elastic bars are determined to avoid this interference. In order to avoid the interference of elastic wave reflected at the threaded parts of specimen and elastic bar, the length of transmit bar must be longer than that of incident bar. Strain gage in transmit bar must be located as close as possible from the interface of a transmit bar and specimen. In the developed tensile SHPB test system, A12011-T3 and A17075-T6 are tested to get the true stress-strain relation in the range of strain rate at $10^3/sec$

• 대한방사선기술학회지:방사선기술과학
• /
• 제20권1호
• /
• pp.21-27
• /
• 1997

Total laryngectomy has become an usual treatment for any advanced carcinoma of the laynx, but most patients who have undergone total laryngectomy have shown permanant disability in voice production. I compared the first three formant frequencies estimated from MRI to those measured directly from speech data of the T-E patients and the normal. It was to estimate the accuracy of MRI and to compare the vocal tract shape of the normal to T-E patients. The obtained results were as follows : 1. The middle sagittle section of the MRI represents vocal tract well during pnonation. The vocal tract shape of the T-E shunt patients are lack of pharyngeal space and superior space of the glottis. 2. The length of the normal subject's vocal tract is 17 cm. For the T-E shunt patients, the length from lip to shunt opening is 17.5 cm in case 1, and 18.5 cm in case 2. That of the true resonante chamber is 13 cm and 13.5 cm for each case respectively. 3. T-E shunt patients phonated strained voice. The intensity of the higher formant frequency decreased especially in /o/, /u/. 4. The vocal tract is shortened during the phonation by T-E shunt patients. In case of /e/ and /i/, front cavities are constricted while back cavities are shortened. 5. The pseudoglottis of the T-E shunt patients is located at $14{\sim}15\;cm$ below from lips.

• 한국태양에너지학회 논문집
• /
• 제31권5호
• /
• pp.85-90
• /
• 2011

The effects of $CO_2$ ppm in atmosphere on the values of the total emissivity are studied. The predictions by several methods are compared. The predicted value differences between modified Kondratyev model and Hottel model are the smallest with in the range of values tested. The $CO_2$ ppm is varied from 300 ppm to 600 ppm. By Wide Band model, the total emissivity increases with increasing density-path length product rather linearly up to 0.1 g/$cm^2$. For given $CO_2$ ppm, the total emissivity increases as the air thickness increases. The same is true for both temperature and pressure increase. The temperature range tested is 220 to 300 K. Around 260K, the total emissivity is less sensitive with increasing temperature than with decreasing temperature. The pressure is varied from 0.94 to 1.06 atm. The percentage change of total emissivity with pressure change from 1atm is at most the percentage change of the pressure.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.242-246
• /
• 2004

Effects of circumferentially local wall thinning on the fracture behavior of pipes were investigated by monotonic four-point bending. Local wall thinning was machined on the pipes in order to simulate erosion/corrosion metal loss. The configurations of the eroded area included an eroded ratio of d/t= 0.2, 0.5, 0.6, and 0.8, and an eroded length of I = 10 mm, 25 mm, and 120 mm. Fracture type could be classified into ovalization, local buckling, and crack initiation depending on the eroded length and eroded ratio. Three-dimensional elasto-plastic analyses were also carried out using the finite element method, which is able to accurately simulate fracture behaviors excepting failure due to cracking. It was possible to predict the crack initiation point by estimating true fracture ductility under multi-axial stress conditions at the center of the eroded area.

• 펄프종이기술
• /
• 제33권3호
• /
• pp.18-23
• /
• 2001

The effect of pulp consistency on the deinking properties in the ozone deinking of ONP was investigated in order to develop the environmentally friendly deinking method. The pulp consistency and ozone treatment time were varied for this purpose. Higher pulp consistency during ozone treatment gave better ink removal efficiency than the conventional deinking method. In was also found that the increase of pulp consistency can decrease the ozone treatment time which can meet the deinking quality. WRV of ozone deinked pulp obtained at 10% and 30% of pulp consistencies was lower than those of the conventional deinking method. However, the higher pulp consistency during ozone treatment improved WRV. Highest brightness was obtained at the ozone treatment condition of 30% pulp consistency and 10 minutes. The lower brightness at the other ozone treatment condition should be originated from the excessive decrease of ink particle size and then decrease of true ink removal efficiency. Scott bond was increased with the increase of pulp consistency and treatment time. However, the improvement of breaking length with ozone treatment was no significant.

• 한국기계가공학회지
• /
• 제18권11호
• /
• pp.47-56
• /
• 2019

A deep neural network (DNN) model was proposed to predict the upset in the inertia friction welding process using a database comprising results from a series of FEM analyses. For the database, the upset length, upset beginning time, and upset completion time were extracted from the results of the FEM analyses obtained with various of axial pressure and initial rotational speed. A total of 35 training sets were constructed to train the proposed DNN with 4 hidden layers and 512 neurons in each layer, which can relate the input parameters to the welding results. The mean of the summation of squared error between the predicted results and the true results can be constrained to within 1.0e-4 after the training. Further, the network model was tested with another 10 sets of welding input parameters and results for comparison with FEM. The test showed that the relative error of DNN was within 2.8% for the prediction of upset. The results of DNN application revealed that the model could effectively provide welding results with respect to the exactness and cost for each combination of the welding input parameters.

• The Journal of Advanced Prosthodontics
• /
• 제13권4호
• /
• pp.205-215
• /
• 2021

PURPOSE. The purpose of this study was to compare the accuracy of three intraoral scanner (IOS) systems with three different dental arch widths. MATERIALS AND METHODS. Three dental models with different intermolar widths (small, medium, and large) were attached to metal bars of different lengths (30, 40, and 50 mm). The bars were measured with a coordinate measuring machine and used as references. Three IOSs were compared: TRIOS 3 (TRI), True Definition (TD), and Dental Wings (DW). The relative length and angular deviation of both ends of the metal bars from the scan data set (n = 15) were calculated and analyzed. RESULTS. Comparing among scanners in terms of trueness, the relative length deviation of DW in the small (1.28%) and medium (1.08%) arches were significantly higher than TRI (0.46% and 0.48%) and TD (0.33% and 0.18%). The angular deviation of DW in the small (1.75°) and medium (1.83°) arches were also significantly greater than TRI (0.63° and 0.40°) and TD (0.55° and 0.89°). Comparing within scanner, the large arch of DW showed better accuracy than other arch sizes (P < .05). On the other hand, the larger arch of TD presented a greater tendency of angular deviation in terms of trueness. No significant differences were found in terms of trueness between the arch widths of TRI group. CONCLUSION. The different widths of the dental arches can affect the accuracy of some intraoral scanners in full arch scan.