• Korean journal of applied entomology
• /
• v.34 no.3
• /
• pp.234-242
• /
• 1995

The functional responses of the female Cyrtorhinus lividipennis on brown planthopper (BPH), Nilaparvata lugens, eggs and their predation behavior were investigated at six temperature conditions; 20, 23, 26, 29, 32, and $35^{\circ}C$. C. lividipennis was found to prefer young BPH eggs, especially 3-day-old eggs the most. The functional responses for female C. lividipennis on BPH eggs fitted the Holling's Type-I true predator-prey Rogers' (1972) model at all temperatures tested except $35^{\circ}C$ at which the negative Th value was produced. With the temperature increased up to 32$^{\circ}C$, the instantaneous attacking rate(a) increased from 0.1923 at $20^{\circ}C$ to 0.5085 at $32^{\circ}C$, while the handling time (Th) was gradually decreased as low as 0.0151 at $32^{\circ}C$. C. lividipenis preferred the BPH eggs laid on the upper part of rice stem when the BPH egg density was high, but there was no significant difference in the preference when the egg density was low. The preference was more obvious in high temperature conditions such as above 29$^{\circ}C$.

• Journal of the Korean Chemical Society
• /
• v.63 no.3
• /
• pp.151-159
• /
• 2019

The TADF properties for carbazol-dicyanobenzene, carbazol-diphenyl sulfone, carbazol-benzonitrile derivatives as OLED candidate materials are theoretically investigated using density functional theory (DFT) with $6-31G^{**}$, cc-pVDZ, and cc-pVTZ basis sets. The optimized geometries, harmonic vibrational frequencies, and HOMO-LUMO energy separations are predicted at the B3LYP/$6-31G^{**}$ level of theory. The harmonic vibrational frequencies of the molecules considered in this study show all real numbers implying true minima. The time dependent density functional theory (TD-DFT) calculations have been also applied to investigate the absorption and emission wavelength (${\lambda}_{max}$), energy differences (${\Delta}E_{ST}$) between excited singlet ($S_1$) and triplet ($T_1$) states of candidate materials.

• Food Science of Animal Resources
• /
• v.41 no.5
• /
• pp.855-868
• /
• 2021

The present study was designed to investigate the effects of protein formula with different casein (C) to whey protein (W) ratios on dispersion stability, protein quality and body composition in rats. Modification of the casein to whey protein (CW) ratio affected the extent of protein aggregation, and heated CW-2:8 showed a significantly increased larger particle (>100 ㎛) size distribution. The largest protein aggregates were formed by whey protein self-aggregation. There were no significant differences in protein aggregation when the CW ratios changed from 10:0 to 5:5. Based on the protein quality assessment (CW-10:0, CW-8:2, CW-5:5, and CW-2:8) for four weeks, CW-10:0 showed a significantly higher feed intake (p<0.05), but the high proportion of whey protein in the diet (CW-5:5 and CW-2:8) increased the feed efficiency ratio, protein efficiency ratio, and net protein ratio compared to other groups. Similarly, CW-2:8 showed greater true digestibility compared to other groups. No significant differences in fat mass and lean mass analyzed by dual-energy x-ray absorptiometry were observed. A significant difference was found in the bone mineral density between the CW-10:0 and CW-2:8 groups (p<0.05), but no difference was observed among the other groups. Based on the results, CW-5:5 improved protein quality without causing protein instability problems in the dispersion.

• Imaging Science in Dentistry
• /
• v.52 no.4
• /
• pp.393-398
• /
• 2022

Purpose: This study proposed a generative adversarial network (GAN) model for T2-weighted image (WI) synthesis from proton density (PD)-WI in a temporomandibular joint(TMJ) magnetic resonance imaging (MRI) protocol. Materials and Methods: From January to November 2019, MRI scans for TMJ were reviewed and 308 imaging sets were collected. For training, 277 pairs of PD- and T2-WI sagittal TMJ images were used. Transfer learning of the pix2pix GAN model was utilized to generate T2-WI from PD-WI. Model performance was evaluated with the structural similarity index map (SSIM) and peak signal-to-noise ratio (PSNR) indices for 31 predicted T2-WI (pT2). The disc position was clinically diagnosed as anterior disc displacement with or without reduction, and joint effusion as present or absent. The true T2-WI-based diagnosis was regarded as the gold standard, to which pT2-based diagnoses were compared using Cohen's ĸ coefficient. Results: The mean SSIM and PSNR values were 0.4781(±0.0522) and 21.30(±1.51) dB, respectively. The pT2 protocol showed almost perfect agreement(ĸ=0.81) with the gold standard for disc position. The number of discordant cases was higher for normal disc position (17%) than for anterior displacement with reduction (2%) or without reduction (10%). The effusion diagnosis also showed almost perfect agreement(ĸ=0.88), with higher concordance for the presence (85%) than for the absence (77%) of effusion. Conclusion: The application of pT2 images for a TMJ MRI protocol useful for diagnosis, although the image quality of pT2 was not fully satisfactory. Further research is expected to enhance pT2 quality.

• Geomechanics and Engineering
• /
• v.33 no.1
• /
• pp.11-18
• /
• 2023

This study explores a new energy partitioning approach to determine the fracture toughness of 3-D printed pristine/recycled high density polyethylene (HDPE) blends employing the essential work of fracture (EWF) concept. The traditional EWF approach conducts a uniaxial tensile test with double-edge notched tensile (DENT) specimens and measures the total energy defined by the area under a load-displacement curve until failure. The approach assumes that the entire total energy contributes to the fracture process only. This assumption is generally true for extruded polymers that fracture occurs in a material body. In contrast to the traditional extrusion manufacturing process, the current 3-D printing technique employs fused deposition modeling (FDM) that produces layer-by-layer structured specimens. This type of specimen tends to include separation energy even after the complete failure of specimens when the fracture test is conducted. The separation is not relevant to the fracture process, and the raw experimental data are likely to possess random variation or noise during fracture testing. Therefore, the current EWF approach may not be suitable for the fracture characterization of 3-D printed specimens. This paper proposed a new energy partitioning approach to exclude the irrelevant energy of the specimens caused by their intrinsic structural issues. The approach determined the energy partitioning location based on experimental data and observations. Results prove that the new approach provided more consistent results with a higher coefficient of correlation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.1
• /
• pp.11-19
• /
• 1999

This experiment was conducted with nine wheat geno-types to choose the wheat which has excellent early vigour. 'Vigour 18' and 'ZL 59A' are excellent in the long coleoptile genotype, while 'Amery' and 'Janz' are excellent in the short coleoptile genotype. Responding to the growth stage and nitrogen level, Vigour 18 is predominant in the long coleoptile genogype, while Janz in the short coleoptile genotype. Responding to sowing density and nitrogen level, the higher the sowing density was, the shorter the leaf area of Vigour 18 and Janz. Also the leaf area turned out to larger in the plot fertilized with high nitrogen than in the plot fertilized with low nitrogen. This is true of leaf weight and root weight. Concerning specific leaf area (SLA) and leaf area ratio (LAR), the higher the sowing density was, the SLA tended to grow larger, while the SLA grew larger in the plot fertilized with low nitrogen, as were found in Vigour 18 and Janz. The roots of long coleoptile genotype, Vigour 18, turned out to grow longest on the plot sown with 3 seeds. While the roots of short coleoptile genotype, Janz, grew longest on the plot sown with 2 seeds. The relative growth rate (RGR) was the same at low N rates and high N rates. The RGR was 0.071 and 0.072 g $g^{-1}d^{-1}$ at low N rates and high N rates. The partitioning of RGR into net assimilation rate (NAR) and LAR showed that the average LAR at low N rates was similar to the LAR at high N rates. Variation within each cultivar in the LAR and NAR was small relative to the difference between them at low N rates and high N rates. Above ground mass was 8.2 mg greater at high N rates than low N rates, whereas leaf area was 0.05 $\textrm{m}^2$$kg^{-l}$ greater at high N rates than low N rates. The NAR was similar at low N rates and high N rates, whereas LAR was greater at high N rates (0.05 $\textrm{m}^2$$kg^{-l}$); variation in SLA was responsible for the variation in NAR and LAR both at low N rates and high N rates. NAR was more closely associated with the reciprocal of SLA.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.1
• /
• pp.33-40
• /
• 2021

The objective of this work is to prove a possibility of void f illing through a carbonation f or the purpose of improving the quality of recycled aggregate. Carbonation can permanently immobilize CO2, which is a greenhouse gas, and thus provides additional benefit on environment. In this work, recycled fine aggregate was reacted using gaseous CO2 and supercritical CO2(scCO2) in a closed chamber, and the changes in physical properties of the recycled f ine aggregate bef ore and af ter carbonation were analyzed using the apparent density, skeletal density, pH, and FE-SEM measurements. Thereafter, a mortar specimen was prepared and a compressive strength was measured. According to the experimental results, it was found that the increase in the apparent density and the true density was higher by the reaction with scCO2, which was conducted at high temperature and high pressure compared to the reaction with gaseous CO2. In addition, the pH of the eluted water was found to have a larger initial decrease than that observed with samples from reaction by gaseous CO2. The shape and amount of calcium carbonate crystals were also found to be larger than that from gaseous CO2. The increase in compressive strength was the largest when using recycled fine aggregate reacted with scCO2. It was clear that quality improvement of recycled fine aggregate was higher with scCO2 than with gaseous CO2.

• The Korean Journal of Nuclear Medicine
• /
• v.39 no.3
• /
• pp.182-190
• /
• 2005

Purpose: There are differences between Standard Uptake Value (SUV) of CT attenuation corrected PET and that of $^{137}Cs$. Since various causes lead to difference of SUV, it is important to know what is the cause of these difference. Since only the X-ray CT and $^{137}Cs$ transmission data are used for the attenuation correction, in Philips GEMINI PET/CT scanner, proper transformation of these data into usable attenuation coefficients for 511 keV photon has to be ascertained. The aim of this study was to evaluate the accuracy in the CT measurement and compare the CT and $^{137}Cs$-based attenuation correction in this scanner. Methods: For all the experiments, CT was set to 40 keV (120 kVp) and 50 mAs. To evaluate the accuracy of the CT measurement, CT performance phantom was scanned and Hounsfield units (HU) for those regions were compared to the true values. For the comparison of CT and $^{137}Cs$-based attenuation corrections, transmission scans of the elliptical lung-spine-body phantom and electron density CT phantom composed of various components, such as water, bone, brain and adipose, were performed using CT and $^{137}Cs$. Transformed attenuation coefficients from these data were compared to each other and true 511 keV attenuation coefficient acquired using $^{68}Ge$ and ECAT EXACT 47 scanner. In addition, CT and $^{137}Cs$-derived attenuation coefficients and SUV values for $^{18}F$-FDG measured from the regions with normal and pathological uptake in patients' data were also compared. Results: HU of all the regions in CT performance phantom measured using GEMINI PET/CT were equivalent to the known true values. CT based attenuation coefficients were lower than those of $^{68}Ge$ about 10% in bony region of NEMA ECT phantom. Attenuation coefficients derived from $^{137}Cs$ data was slightly higher than those from CT data also in the images of electron density CT phantom and patients' body with electron density. However, the SUV values in attenuation corrected images using $^{137}Cs$ were lower than images corrected using CT. Percent difference between SUV values was about 15%. Conclusion: Although the HU measured using this scanner was accurate, accuracy in the conversion from CT data into the 511 keV attenuation coefficients was limited in the bony region. Discrepancy in the transformed attenuation coefficients and SUV values between CT and $^{137}Cs$-based data shown in this study suggests that further optimization of various parameters in data acquisition and processing would be necessary for this scanner.

• Journal of the Korean Mathematical Society
• /
• v.52 no.4
• /
• pp.853-868
• /
• 2015

Let G be a complex semisimple simply connected linear algebraic group. The main result of this note is to give several equivalent criteria for the untwistedness of the twisted cubes introduced by Grossberg and Karshon. In certain cases arising from representation theory, Grossberg and Karshon obtained a Demazure-type character formula for irreducible G-representations as a sum over lattice points (counted with sign according to a density function) of these twisted cubes. A twisted cube is untwisted when it is a "true" (i.e., closed, convex) polytope; in this case, Grossberg and Karshon's character formula becomes a purely positive formula with no multiplicities, i.e., each lattice point appears precisely once in the formula, with coefficient +1. One of our equivalent conditions for untwistedness is that a certain divisor on the special fiber of a toric degeneration of a Bott-Samelson variety, as constructed by Pasquier, is basepoint-free. We also show that the strict positivity of some of the defining constants for the twisted cube, together with convexity (of its support), is enough to guarantee untwistedness. Finally, in the special case when the twisted cube arises from the representation-theoretic data of $\lambda$ an integral weight and $\underline{w}$ a choice of word decomposition of a Weyl group element, we give two simple necessary conditions for untwistedness which is stated in terms of $\lambda$ and $\underline{w}$.

• Communications for Statistical Applications and Methods
• /
• v.5 no.2
• /
• pp.517-529
• /
• 1998

When the sample size is small the robust minimum Hellinger distance (HD) estimator can have substantially poor relative efficiency at the true model. Similarly, approximating the exact null distributions of the ordinary Hellinger distance tests with the limiting chi-square distributions can be quite inappropriate in small samples. To overcome these problems Harris and Basu (1994) and Basu et at. (1996) recommended using a modified HD called penalized Hellinger distance (PHD). Lindsay (1994) and Basu et al. (1997) showed that another density based distance, namely the negative exponential disparity (NED), is a major competitor to the Hellinger distance in producing an asymptotically fully efficient and robust estimator. In this paper we investigate the small sample performance of the estimates and tests based on the NED and penalized NED (PNED). Our results indicate that, in the settings considered here, the NED, unlike the HD, produces estimators that perform very well in small samples and penalizing the NED does not help. However, in testing of hypotheses, the deviance test based on a PNED appears to achieve the best small-sample level compared to tests based on the NED, HD and PHD.