• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.9
• /
• pp.1571-1578
• /
• 2003

This paper proposes a robust method for the Ramberg-Osgood(R-O)fit to accurately estimate elastic-plastic J from engineering fracture mechanics analysis based on deformation plasticity. The proposal is based on engineering stress-strain data to determine the R-O parameters, instead of true stress-strain data. Moreover, for practical applications, the method is given not only for the case when full stress-strain data are available but also for the case when only yield and tensile strengths are available. Reliability of the proposed method for the R-O fit is validated against detailed 3-D Finite Element (FE) analyses for circumferential through-wall cracked pipes under global bending using five different materials, three stainless steels and two ferritic steels. Taking the FE J results based on incremental plasticity using actual stress-strain data as reference, the FE J results based on deformation plasticity using various R-O fits are compared with reference J values. Comparisons show that the proposed R-O fit provides more accurate J values for all cases, compared to existing methods for the R-O fit. Advantages of the proposed R-O fit in practical applications are discussed, together with its accuracy.

• Nuclear Engineering and Technology
• /
• v.48 no.6
• /
• pp.1387-1395
• /
• 2016

To investigate the dynamic strain aging (DSA) behavior of Alloy 617, high-temperature tensile tests were carried out with strain rates variations of $10^{-3}/s$, $10^{-4}/s$, and $10^{-5}/s$ from $24^{\circ}C$ to $950^{\circ}C$. Five flow relationships, Hollomon, Ludwik, Swift, Ludwigson, and Voce, were applied to describe the tensile true stress-strain curves, and the DSA region was defined. In describing the tensile curves, Ludwigson's equation was superior to the other equations, and the DSA region was adequately defined by this equation as plateaus at intermediate temperatures from $200^{\circ}C$ to $700^{\circ}C$. It was identified that Alloy 617 is dominated by three types of serrations, known as Types D, A+B, and C. The activation energy values for each serration type were obtained by the Arrhenius equation. By using the obtained activation energy values, the serrated yielding map and the DSA mechanism were drawn and manifested. In addition, the relationship between the tensile strength and strain rate at higher temperatures above $700^{\circ}C$ was found to be closely related to the amounts of slip lines. In the scanning electron microscope (SEM) fractographs, there was a significant difference at the low, intermediate, and high temperatures, but almost the same to the three strain rates.

• The Mathematical Education
• /
• v.49 no.2
• /
• pp.161-174
• /
• 2010

The purpose of the study is to analyze various types of errors appeared in true-false proof problems of matrix and to find out correction method. In order to achieve this purpose, error test was conducted to the subject of 87 second grade students who were chosen from D high schoool. It was shown from this test that the most frequent error type was caused by the lack of understanding about concepts and essential facts of matrix(35.3%), and then caused by the invalid logically reasoning (27.4%), and then caused by the misusing conditions(18.7%). Through three hours of correction lessons with 5 students, the following correction teaching method was proposed. First, it is stressed that the operation rules and properties satisfied in real number system can not be applied in matrix. Second, it is taught that the analytical proof method and the reductio ad absurdum method are useful in the proof problem of matrix. Third, it is explained that the counter example of E=$\begin{pmatrix}1\;0\\0\;1 \end{pmatrix}$, -E should be found in proof of the false statement. Fourth, it is taught that the determinant condition should be checked for the existence of the inverse matrix.

• The Journal of Korean Medical History
• /
• v.25 no.2
• /
• pp.137-153
• /
• 2012

A thesis insisting that Sugjong's medical doctor Yoo Itae(劉以泰) and the author of Marjinpyeon Yoo Itae(劉爾泰) are not a same person and his activities were in Heonjong(헌종) period, and his writing Marjinpyeon is in 1846, is published. In this study, I'd like to reveal that Yoo Itae(劉爾泰), the Marjinpyeon's author and Yoo Itae(劉以泰), Sugjong's medical doctor are a same person through analysis of Geochang Yoo's genealogy, articles, The True Record of the Joseon Dynasty, Seungjeonilgi, Taeweonseonsaengan, Sancheong-gun's paper, Sancheong Hyanggyo's paper, Sancheong-gun's paper, The geographic paper, Dongyuhagan, Sawoo Munjib, and analysis of folk story, the wrote year of his Marjinpyeon and Inseomunkyunrok and his birth year. According to my analysis, Yoo Itae(劉爾泰), the Marjinpyeon's author and Yoo Itae(劉以泰), Sugjong's medical doctor are a same person. And Marjinpyeon is written in 1696, the year of Byongja, and other his books, InseoMungyonlok at 1709, the year of Gichug. In conclusion, Yoo Itae(劉以泰.劉爾泰) was a famous medical doctor at Sancheong, born in 1652 (HyoJong the $3^{rd}$ year) and passed in 1715 (SugJong the 41th year), left books of Marjinpyeon, Silheomdanbang, and Inseomunkyunrok.

• Nuclear Engineering and Technology
• /
• v.53 no.9
• /
• pp.2775-2787
• /
• 2021

At present, most of the widely used system codes for nuclear safety analysis are one-dimensional, which cannot effectively simulate the flow field of the reactor core or other structures. This is true even for the system codes containing three-dimensional modules with limited three-dimensional simulation function such as RELAP-3D. In contrast, the computational fluid dynamics (CFD) codes excel at providing a detailed three-dimensional flow field of the reactor core or other components; however, the computational domain is relatively small and results in the very high computing resource consuming. Therefore, the development of coupling codes, which can make comprehensive use of the advantages of system and CFD codes, has become a research focus. In this paper, a review focus on the researches of coupled CFD and thermal-hydraulic system codes was carried out, which summarized the method of coupling, the data transfer processing between CFD and system codes, and the verification and validation (V&V) of coupled codes. Furthermore, a series of problems associated with the coupling procedure have been identified, which provide the general direction for the development and V&V efforts of coupled codes.

• The Journal of Korean Society for Radiation Therapy
• /
• v.27 no.2
• /
• pp.145-156
• /
• 2015

Purpose : The purpose of this study is to evaluate the efficiency of Split VMAT planning(Contouring rectum divided into an upper and a lower for reduce rectum dose) compare to Conventional VMAT planning(Contouring whole rectum) for prostate cancer radiotherapy involving pelvic lymph nodes. Materials and Methods : A total of 9 cases were enrolled. Each case received radiotherapy with Split VMAT planning to the prostate involving pelvic lymph nodes. Treatment was delivered using TrueBeam STX(Varian Medical Systems, USA) and planned on Eclipse(Ver. 10.0.42, Varian, USA), PRO3(Progressive Resolution Optimizer 10.0.28), AAA(Anisotropic Analytic Algorithm Ver. 10.0.28). Lower rectum contour was defined as starting 1cm superior and ending 1cm inferior to the prostate PTV, upper rectum is a part, except lower rectum from the whole rectum. Split VMAT plan parameters consisted of 10MV coplanar $360^{\circ}$ arcs. Each arc had $30^{\circ}$ and $30^{\circ}$ collimator angle, respectively. An SIB(Simultaneous Integrated Boost) treatment prescription was employed delivering 50.4Gy to pelvic lymph nodes and 63~70Gy to the prostate in 28 fractions. $D_{mean}$ of whole rectum on Split VMAT plan was applied for DVC(Dose Volume Constraint) of the whole rectum for Conventional VMAT plan. In addition, all parameters were set to be the same of existing treatment plans. To minimize the dose difference that shows up randomly on optimizing, all plans were optimized and calculated twice respectively using a 0.2cm grid. All plans were normalized to the prostate $PTV_{100%}$ = 90% or 95%. A comparison of $D_{mean}$ of whole rectum, upperr ectum, lower rectum, and bladder, $V_{50%}$ of upper rectum, total MU and H.I.(Homogeneity Index) and C.I.(Conformity Index) of the PTV was used for technique evaluation. All Split VMAT plans were verified by gamma test with portal dosimetry using EPID. Results : Using DVH analysis, a difference between the Conventional and the Split VMAT plans was demonstrated. The Split VMAT plan demonstrated better in the $D_{mean}$ of whole rectum, Up to 134.4 cGy, at least 43.5 cGy, the average difference was 75.6 cGy and in the $D_{mean}$ of upper rectum, Up to 1113.5 cGy, at least 87.2 cGy, the average difference was 550.5 cGy and in the $D_{mean}$ of lower rectum, Up to 100.5 cGy, at least -34.6 cGy, the average difference was 34.3 cGy and in the $D_{mean}$ of bladder, Up to 271 cGy, at least -55.5 cGy, the average difference was 117.8 cGy and in $V_{50%}$ of upper rectum, Up to 63.4%, at least 3.2%, the average difference was 23.2%. There was no significant difference on H.I., and C.I. of the PTV among two plans. The Split VMAT plan is average 77 MU more than another. All IMRT verification gamma test results for the Split VMAT plan passed over 90.0% at 2 mm / 2%. Conclusion : As a result, the Split VMAT plan appeared to be more favorable in most cases than the Conventional VMAT plan for prostate cancer radiotherapy involving pelvic lymph nodes. By using the split VMAT planning technique it was possible to reduce the upper rectum dose, thus reducing whole rectal dose when compared to conventional VMAT planning. Also using the split VMAT planning technique increase the treatment efficiency.

• Journal of Astronomy and Space Sciences
• /
• v.28 no.3
• /
• pp.163-172
• /
• 2011

An intensive analysis of 185 timings of WZ Cep, including our new three timings, was made to understand the dynamical picture of this active W UMa-type binary. It was found that the orbital period of the system has complexly varied in two cyclical components superposed on a secularly downward parabola over about 80y. The downward parabola, corresponding to a secular period decrease of $-9.{^d}97{\times}10^{-8}y^{-1}$, is most probably produced by the action of both angular momentum loss (AML) due to magnetic braking and mass-transfer from the massive primary component to the secondary. The period decrease rate of $-6.^{d}72{\times}10^{-8}y^{-1}$ due to AML contributes about 67% to the observed period decrease. The mass flow of about $5.16{\times}10^{-8}M_{\odot}y^{-1}$ from the primary to the secondary results the remaining 33% period decrease. Two cyclical components have an $11.^{y}8$ period with amplitude of $0.^{d}0054$ and a $41.^{y}3$ period with amplitude of $0.^{d}0178$. It is very interesting that there seems to be exactly in a commensurable 7:2 relation between their mean motions. As the possible causes, two rival interpretations (i.e., light-time effects (LTE) by additional bodies and the Applegate model) were considered. In the LTE interpretation, the minimum masses of $0.30M_{\odot}$ for the shorter period and $0.49M_{\odot}$ for the longer one were calculated. Their contributions to the total light were at most within 2%, if they were assumed to be main-sequence stars. If the LTE explanation is true for the WZ Cep system, the 7:2 relation found between their mean motions would be interpreted as a stable 7:2 orbit resonance produced by a long-term gravitational interaction between two tertiary bodies. In the Applegate model interpretation, the deduced model parameters indicate that the mechanism could work only in the primary star for both of the two period modulations, but could not in the secondary. However, we couldn't find any meaningful relation between the light variation and the period variability from the historical light curve data. At present, we prefer the interpretation of the mechanical perturbation from the third and fourth stars as the possible cause of two cycling period changes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.12
• /
• pp.1773-1782
• /
• 2014

The aim of the experiment was to study the effect of feeding system on meat quality characteristics of Small East African (SEA) goats and their crosses with Norwegian ($SEA{\times}N$) goats finished under small scale farming conditions. Twenty four castrated goats at the age of 18 months with live body weight of $16.7{\pm}0.54kg$ from each breed (SEA and $SEA{\times}N$) were distributed in a completely randomized design in a $2{\times}3$ factorial arrangement (two breed, and three dietary treatments). The dietary treatments were; no access to concentrate (T0), 66% access to ad libitum concentrate allowance (T66) and 100% access to ad libitum concentrate allowance with 20% refusal (T100) and the experimental period was for 84 days. In addition, all goats were allowed to graze for 2 hours daily and later fed grass hay on ad libitum basis. Daily feed intakes were recorded for all 84-days of experiment after which the animals were slaughtered. Feed intake of T100 animals was 536 g/d, which was 183 g/d higher than that of T66 group. Supplemented goats had significantly (p<0.05) better feed conversion efficiency. The SEA had higher (p<0.05) hot carcass weight (8.2 vs 7.9 kg), true dressing percentage (54.5 vs 53.3) and commercial dressing percentage (43.3 vs 41.6) compared to $SEA{\times}N$. There was no significant difference (p>0.05) for dressing percentage and carcass conformation among supplemented goats except fatness score, total fat depots and carcass fat which increased (p<0.05) with increasing concentrate levels in the diet. Increasing level of concentrate on offer increased meat dry matter with subsequent increase of fat in the meat. Muscle pH of goats fed concentrate declined rapidly and reached below 6 at 6 h post-mortem but temperature remained at $28^{\circ}C$. Cooking loss and meat tenderness improved (p<0.05) and thawing loss increased (p<0.05) with ageing period. Similarly, meat tenderness improved (p<0.05) with concentrate supplementation. Shear force of muscles varied from 36 to 66, the high values been associated with Semimembranosus and Gluteobiceps muscles. The present study demonstrates that there are differences in meat quality characteristics of meat from SEA goats and their crosses with Norwegian breeds finished under small scale farming conditions in rural areas. Therefore, concentrate supplementation of goats of both breeds improves meat quality attributes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.5
• /
• pp.775-783
• /
• 2007

To elucidate the efficacy of different soy protein sources on piglet's performance, a total of 280 weaned piglets ($Duroc{\times}Yorkshire{\times}Landrace$, $23{\pm}3$ d of age, $5.86{\pm}0.45$ kg initial BW) were allotted to 5 treatment diets comprising soybean meal (SBM), soy protein concentrate (SPC), Hamlet protein (HP300), fungal (Aspergillus oryzae) fermented soy protein (FSP-A), and fungal plus bacterial (A. oryzae+Bacillus subtilis) fermented soy protein (FSP-B), respectively. Experimental diets for feeding trial were formulated to contain each soy protein sources at 8% level to corn-whey powder basal diet. There were 14 pigs per pen and 4 pens per treatment. Experimental diets were fed from 0 to 14 d after weaning and then a common commercial diet was fed from 15 to 35 d. Also for ileal digestibility studies, 18 pigs were assigned to 6 dietary treatments as N-free, SBM, SPC, HP300, FSP-A and FSP-B with T-canulation at distal ileum for 6 days. At $14^{th}$ d of experimental feeding, the ADG was significantly higher (p<0.05) in SPC fed diet as compared with others. Similar trend was noticed during the 15-35 d and overall study (0-35 d). All the processed soy protein sources tested in this experiment improved (p<0.05) growth than SBM during overall study. The nutrient digestibility of GE, DM, CP and Ca showed lower (p<0.05) values in SBM and FSP-A fed groups than SPC and FSP-B treatments. The apparent ileal digestibility of TEAA, non-TEAA and TAA showed lower (p<0.05) in SBM treatments compared with other soy protein sources. The true ileal digestibility of TEAA, non-TEAA and TAA were lower (p<0.05) in SBM fed group than SPC and HP300 treatments, and lower than FSP treatments though they didn't achieve significant difference (p>0.05). Villous height and crypt depth was not affected by dietary treatments. In conclusion, the growth and digestibility of nutrients in weaned pigs fed SPC was superior to others. Also FSP-A and FSP-B showed improved performance than those fed SBM.

• Imaging Science in Dentistry
• /
• v.43 no.3
• /
• pp.163-169
• /
• 2013

Purpose: Tonsilloliths are calcifications found in the crypts of the palatal tonsils and can be detected on routine panoramic examinations. This study was performed to highlight the benefits of cone-beam computed tomography (CBCT) in the diagnosis of tonsilloliths appearing bilaterally on panoramic radiographs. Materials and Methods: The sample group consisted of 7 patients who had bilateral radiopaque lesions at the area of the ascending ramus on panoramic radiographs. CBCT images for every patient were obtained from both sides of the jaw to determine the exact locations of the lesions and to rule out other calcifications. The calcifications were evaluated on the CBCT images using Ez3D2009 software. Additionally, the obtained images in DICOM format were transferred to ITK SNAP 2.4.0 pc software for semiautomatic segmentation. Segmentation was performed using contrast differences between the soft tissues and calcifications on grayscale images, and the volume in mm3 of the segmented three dimensional models were obtained. Results: CBCT scans revealed that what appeared on panoramic radiographs as bilateral images were in fact unilateral lesions in 2 cases. The total volume of the calcifications ranged from 7.92 to $302.5mm^3$. The patients with bilaterally multiple and large calcifications were found to be symptomatic. Conclusion: The cases provided the evidence that tonsilloliths should be considered in the differential diagnosis of radiopaque masses involving the mandibular ramus, and they highlight the need for a CBCT scan to differentiate pseudo- or ghost images from true bilateral pathologies.