• Title/Summary/Keyword: true 3D

Search Result 298, Processing Time 0.027 seconds

On the Suitability of the volume table based upon D.B.H. and Height now in use (현행(現行) 이변수재적표(二變數材積表)의 적합성(適合性)에 대(對)하여)

  • Kim, D.C.
    • Journal of Korean Society of Forest Science
    • /
    • v.5 no.1
    • /
    • pp.1-3
    • /
    • 1966
  • According to the test of suitability on the acting volume table based upon D.B.H. and Height, the volume by the standing volume table of soft woods produced in Kangwon Province is larger than the true volume and the volume by the standing volume table prepared in form factor 0.45 is smaller than the true volume on the all species obviously. But the volume by the standing volume table of the red pine produced in Kangwon Province and that of Korean white pine prepared in Forest Expriment Station equal to the true volume well.

  • PDF

The Landscape Interpretation of Joseon Era Gardens in Old West Village, Seoul through the Locational Investigation (서울 서촌지역 조선조 원림의 위치추적을 통한 경관 해석)

  • Kim, Han-Bai;Lee, Seung-Hee
    • Journal of the Korean Institute of Traditional Landscape Architecture
    • /
    • v.32 no.3
    • /
    • pp.168-182
    • /
    • 2014
  • Several Sungsi Gardens were built up in Old West Village during the period of the Joseon Dynasty. Most of them were painted as True-View landscape painting. This study aims at examining original locations of representative gardens of the Old West Village by empirical investigation of related True-View landscape paintings. It seeks to demonstrate the garden landscape in True-View landscape painting by utilizing ArcGIS, 3D topographic modeling to observe geographical locations and landscape more realistically. After forming 3D topographic modeling of estimated locations of the gardens, location of objects at composition of 3D modeling similar to True-View landscape painting was found by shifting viewpoints. And by overlapping the cadastral map on the modeling, we could verify the current lot number of the garden sites. The interpretation of processes and results are as follows. In the early stage, Chungpunggye garden was built at the very end of Mt. InWang valley. The site is hidden from the outside, and appeared as 'Enclosed Landscape'. In the middle stage, Chunghuigak garden was built between Okryu-dong valley and the surrounding ridge. It appeared as 'Semi-Opened Landscape'. In the late stage, Seowon garden was built at the highest level of the ridge among the research areas. It appeared as 'Prospective Landscape'. In the last period, Songsukwon garden, was built at a point of contact of the ridge end and surrounding residential area. So it appeared as 'Opened Landscape' to the town. In other words, the location, landscape and social function of the gardens in Old West Village had been gradually opened in Joseon Dynasty.

True Three-Dimensional Cone-Beam Reconstruction (TTCR) Algorithm - Transform Method from Parallel-beam (TTR) Algorithm - (원추형 주사 방식의 3차원 영상 재구성(TTCR) 알고리즘 - 평행주사 방식(TTR) 알고리즘의 좌표변환 -)

  • Lee, S.Z.;Ra, J.B.;Cho, Z.H.
    • Proceedings of the KOSOMBE Conference
    • /
    • v.1989 no.05
    • /
    • pp.55-59
    • /
    • 1989
  • A true three-dimensional cone-beam reconstruction (TTCR) algorithm for the complete sphere geometry is derived, which is applicable to the direct volume image reconstruction from 2-D cone-beam projections. The algorithm is based on the modified filtered backprojection technique which uses a set of 2-D space-invariant filters and is derived from the previously developed parallel-beam true three-dimensional reconstruction(TTR) algorithm. The proposed algorithm proved to be superior in spatial resolution compared with the parallel-beam TTR algorithm.

  • PDF

Synthetic hit-miss transform for optical recognition of a moving target (이동물체의 광학적 인식을 위한 합성 HMT)

  • 김종찬;김정우;이하운;도양회;김수중
    • Journal of the Korean Institute of Telematics and Electronics D
    • /
    • v.35D no.3
    • /
    • pp.82-90
    • /
    • 1998
  • A hit-miss transform(HMT) using synthetic structuring elements(SE's) for optical recognition of a moving target is proposed. A moving target which was obtained from a fixed view point has objects. In proposed HMT, SE's are synthesized by using SDF(synthetic discriminant function) algorithm for efficient recognitionof various shapes of true class objects in noisy and cluttered scene. The synthetic hit SE and the synthetic miss SE are composed of SDF of hit SE's and miss SE's for each true class object. Simulation results show the proposed method can be used for the recognition of various shapes of the true class with one one HMT operation.

  • PDF

Effect of post processing of digital image correlation on obtaining accurate true stress-strain data for AISI 304L

  • Angel, Olivia;Rothwell, Glynn;English, Russell;Ren, James;Cummings, Andrew
    • Nuclear Engineering and Technology
    • /
    • v.54 no.9
    • /
    • pp.3205-3214
    • /
    • 2022
  • The aim of this study is to provide a clear and accessible method to obtain accurate true-stress strain data, and to extend the limited material data beyond the ultimate tensile strength (UTS) for AISI 304L. AISI 304L is used for the outer construction for some types of nuclear transport packages, due to its post-yield ductility and high failure strain. Material data for AISI 304L beyond UTS is limited throughout literature. 3D digital image correlation (DIC) was used during a series of uniaxial tensile experiments. Direct method extracted data such as true strain and instantaneous cross-sectional area throughout testing such that the true stress-strain response of the material up to failure could be created. Post processing of the DIC data has a considerable effect on the accuracy of the true stress-strain data produced. Influence of subset size and smoothing of data was investigated by using finite element analysis to inverse model the force displacement response in order to determine the true stress strain curve. The FE force displacement response was iteratively adapted, using subset size and smoothing of the DIC data. Results were validated by matching the force displacement response for the FE model and the experimental force displacement curve.

Visible Height Based Occlusion Area Detection in True Orthophoto Generation (엄밀 정사영상 제작을 위한 가시고도 기반의 폐색영역 탐지)

  • Youn, Junhee;Kim, Gi Hong
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.28 no.3D
    • /
    • pp.417-422
    • /
    • 2008
  • With standard orthorectification algorithms, one can produce unacceptable structure duplication in the orthophoto due to the double projection. Because of the abrupt height differences, such structure duplication is a frequently occurred phenomenon in the dense urban area which includes multi-history buildings. Therefore, occlusion area detection especially for the urban area is a critical issue in generation of true orthophoto. This paper deals with occlusion area detection with visible height based approach from aerial imagery and LiDAR. In order to accomplish this, a grid format DSM is produced from the point clouds of LiDAR. Next, visible height based algorithm is proposed to detect the occlusion area for each camera exposure station with DSM. Finally, generation of true orthophoto is presented with DSM and previously produced occlusion maps. The proposed algorithms are applied in the Purdue campus, Indiana, USA.

True Digestibility of Phosphorus in Different Resources of Feed Ingredients in Growing Pigs

  • Wu, X.;Ruan, Z.;Zhang, Y.G.;Hou, Y.Q.;Yin, Y.L.;Li, T.J.;Huang, R.L.;Chu, W.Y.;Kong, X.F.;Gao, B.;Chen, L.X.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.21 no.1
    • /
    • pp.107-119
    • /
    • 2008
  • To determine the true digestible phosphorus (TDP) requirement of growing pigs, two experiments were designed with the experimental diets containing five true digestible P levels (0.16%, 0.20%, 0.23%, 0.26% and 0.39%) and the ratio of total calcium to true digestible P (TDP) kept at 2:1. In Experiment 1, five barrows (Duroc${\times}$Landrace${\times}$Yorkshire) with an average initial body weight of 27.9 kg were used in a $5{\times}5$ Latin-square design to evaluate the effect of different dietary P levels on the digestibility and output of P and nitrogen. In Experiment 2, sixty healthy growing pigs (Duroc${\times}$Landrace${\times}$Yorkshire) with an average body weight (BW) of 21.4 kg were assigned randomly to one of the five dietary treatments (12 pigs/diet), and were used to determine the true digestible phosphorus (TDP) requirement of growing pigs on the basis of growth performance and serum biochemical indices. The results indicated that the true digestibility of P increased (p<0.05) linearly with increasing dietary TDP level below 0.26%. The true P digestibility was highest (56.6%) when dietary TDP was 0.34%. Expressed as g/kg dry matter intake (DMI), fecal P output increased (p<0.05) linearly with increasing P input. On the basis of g/kg fecal dry matter (DM), fecal P output was lowest for Diet 4 and highest (p<0.05) for Diet 5. The apparent digestibility of crude protein (CP) did not differ (p>0.05) among the five diets, with the average nitrogen output of 12.14 g/d and nitrogen retention of 66% to 74% (p>0.05), which suggested that there was no interaction between dietary P and CP protein levels. During the 28-d experimental period of Experiment 2, the average daily gain (ADG) of pigs was affected by dietary TDP levels as described by Eq. (1): $y=-809,532x^4+788,079x^3-276,250x^2+42,114x-1,759$; ($R^2=0.99$; p<0.01; y = ADG, g/d; x = dietary TDP, %), F/G for pigs by Eq. (2): $y=3,651.1x^4-3,480.4x^3+1,183.8x^2-172.5x+10.9$ ($R^2=0.99$; p<0.01; y = F/G; x = dietary TDP, %), and Total P concentrations in serum by Eq. (3): $y=-3,311.7x^4+3,342.7x^3-1,224.6x^2+195.6x-8.7$ (R2 = 0.99; p<0.01; y = total serum P concentration and x = dietary TDP, %). The highest ADG (782 g/d), the lowest F/G (1.07) and the highest total serum P concentration (3.1 mmol/L) were obtained when dietary TDP level was 0.34%. Collectively, these results indicate that the optimal TDP requirement of growing pigs is 0.34% of the diet at a total Ca to TDP ratio of 2:1.

Using MIM Software 3-D PET / CT imaging for the evaluation of radiation therapy on the clinical application of research (MIM 소프트웨어를 이용한 3-D PET/CT 영상의 방사선치료 평가를 위한 임상적용에 관한 연구)

  • Lee, SangHo
    • Journal of the Korean Society of Radiology
    • /
    • v.9 no.4
    • /
    • pp.249-255
    • /
    • 2015
  • In this study, through the additional information of the PET / CT images by utilizing the basic data of TPS clinical application on the basis of the image re-forming synthetic function, the True-D technology and MIM software for continued research and development in combination, based on the combination-work between the respective images, reducing the time and cost of useful reading in clinical wide use of image width, efficient, effective tool for tumor targeting at diagnosis and radiation therapy by use as, by using the precise therapeutic effect determination, the time taken to read in the clinical, unnecessary and expect to a can reduce the additional examination by the creation of tumor patients read reports and PACS such asWe expect to be utilized for compatibility development with other software to evaluate the performance of PET / CT equipment.

A Rare Case of Spontaneous True Aneurysm of the Occipital Artery

  • Kim, Hyung-Seok;Son, Byung-Chul;Lee, Sang-Won;Kim, Il-Sup
    • Journal of Korean Neurosurgical Society
    • /
    • v.47 no.4
    • /
    • pp.310-312
    • /
    • 2010
  • A 51-year-old man presented with a pulsatile scalp mass over the right occipital region, which had increased in size over the previous 1 month. He had no previous history of head trauma. Three-dimensional computed tomography (3D-CT) angiography of the brain revealed a $3.0{\times}1.5\;cm$ occipital artery aneurysm arising from the occipital artery. The occipital artery aneurysm was removed following the ligation of the proximal and distal portion of the occipital artery aneurysm. The histological diagnosis was true aneurysm. To the best of our knowledge, this is the first reported case in the literature.

Fast Digital Hologram Generation Using True 3D Object (실물에 대한 디지털 홀로그램 고속 생성)

  • Kang, Hoon-Jong;Lee, Gang-Sung;Lee, Seung-Hyun
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.34 no.11B
    • /
    • pp.1283-1288
    • /
    • 2009
  • In general, a 3D computer graphic model is being used to generate a digital hologram as theinput information because the 3D information of an object can be extracted from a 3D model, easily. The 3D information of a real scene can be extracted by using a depth camera. The 3D information, point cloud, corresponding to real scene is extracted from a taken image pair, a gray texture and a depth map, by a depth camera. The extracted point cloud is used to generate a digital hologram as input information. The digital hologram is generated by using the coherent holographic stereogram, which is a fast digital hologram generation algorithm based on segmentation. The generated digital hologram using the taken image pair by a depth camera is reconstructed by the Fresnel approximation. By this method, the digital hologram corresponding to a real scene or a real object could be generated by using the fast digital hologram generation algorithm. Furthermore, experimental results are satisfactory.