• 한국응용과학기술학회지
• /
• 제20권2호
• /
• pp.110-117
• /
• 2003

Pyrophosphoric modified polyesters (TATBs) were synthesized by polycondensation of adipic acid, trimethylolpropane, 1,4-butanediol, and tetramethylene bis(orthophosphate). Two-component PU flame-retardant coatings (TATBCs) were prepared by blending TATBs with HDI-Biuret. Most of the physical properties of the flame-retardant coatings were comparable to those of non-flame-retardant coatings. Coatings containing 10 and 15wt% 1,4-butanediol, TATBC-10C and TATBC-15C were not flammable in the vertical flame-retardancy test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2077-2080
• /
• 2000

We studied about electrical, chemical and mechanical characteristics of XLPE by dicumyl peroxide(DCP) and trimethylolpropane triacrylate(TMPTA) content ratio. DCP content was changed from 1.0 to 2.5phr increasing 0.5phr. TMPTA content was changed 0.5 to 1.5phr increasing 0.5phr. Thermal analysis (DSC) was carried out in order to observe tendency of 79 according to DCP and TMPTA content. In experimental results, content DCP 2.0phr and TMPTA 1.0phr has highest breakdown strength. Content DCP 2.0phr and TMPTA 0.5phr has lowest dielectric constant. Tendency of Tg did not affected by DCP and TMPTA content. Breakdown strength and Specific inductive capacity was measured.

• 반도체디스플레이기술학회지
• /
• 제13권1호
• /
• pp.35-41
• /
• 2014

UV curable transparent hard coating materials have been developed to improve the mechanical and optical properties of PET substrate. The coating materials were synthesized using various urethane acrylate oligomers, monomers, photo initiators, and leveling agents. The materials were coated on PET substrates and UV cured. The hard coated PET films were shown to have the good scratch resistance and transparency. When the urethane acrylate oligomer with more functional groups was introduced into the coating solution, the mechanical and optical properties were improved. However the higher concentration of 9-functional oligomer resulted in the decrease of workability. The addition of trimethylolpropane ethoxylate$(EO/OH)_9$ triacrylate(TMPETA) to coating solution improved the workability and properties. As a result, the UV cured film from the formulation of urethane acrylate oligomer with 9-functional groups, TMPETA as a monomer, IRACURE 754 as a photo initiator and BYK-340 as a leveling agent showed the best mechanical and optical properties in this study.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제8권4호
• /
• pp.240-245
• /
• 2003

The use of microfabricated microfluidic devices offers significant advantages over current technologies including fast analysis time and small reagent requirements. In the context of proteomic research, the possibility of using affinity-based separations for prefractionation of samples using microfluidic devices has significant potential. We demonstrate the use of microscale devices to achieve affinity separations of proteins using a device fabricated from borosilicate glass wafers. Photolithography and wet etching are used to pattern individual glass wafers and the wafers are fusion bonded at 650$^{\circ}C$ to obtain enclosed channels. A polymer has been successfully polymerized in situ and used either as a frit for packing beads or, when derivatized with Cibacron Blue 3GA, as a separation matrix. Both of these technologies are based on in situ UV photopolymerization of glycidyl methacrylate (GMA) and trimethylolpropane trimethacrylate (TRIM) in channels.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.715-718
• /
• 2000

We studied about electrical, chemical and mechanical characteristics of XLPE by dicumyl peroxide(DCP) and trimethylolpropane triacrylate(TMPTA) content ratio. DCP content was changed from 1.0 to 2.Sphr increasing 0.5phr. TMPTA content was changed 0.5 to 1.5phr increasing 0.5phr. Thermal analysis (DSC) was carried out in order to observe tendency of Tg according to DCP and TMPTA content. Tensile strength was measured in order to observe mechanical strength. In experimental results, content DCP 2.0phr and TMPTA 1.0phr has highest breakdown strength. Content DCP 2.0phr and TMPTA 0.5phr has lowest dielectric constant. Tendency of Tg did not affected by DCP and TMPTA content. Breakdown strength and Specific inductive capacity was measured.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.127-128
• /
• 2005

UV-curable pressure sensitive adhesives were prepared by blending acrylic copolymer, copolymerized with butyl acrylate (BA), acrylic acid (AA) and vinyl acetate (VAc) by solution polymerization, triethyl amine (TEA) and trimethylolpropane triacrylate (TMPTA). The PSAs were evaluated by peel strength with varying contents of TMPTA and UV dose, and also glass transition temperature($T_g$) of PSAs were measured. When exposed on UV irradiation, the PSAs showed the decreased peel strength and increased $T_g$. And following UV irradiation, the PSAs did not leave any residue on wafer after peel off PSA.

• Macromolecular Research
• /
• 제16권2호
• /
• pp.149-154
• /
• 2008

UV-curable electrolytes inks were prepared by dissolving [2-[(methacryloyloxy)ethyl]dimethyl]propylaminium bromide (MEPAB), 1,5-[bis(2-methacryloxyethyl)dimethyl ammono]penthane dibromide (MDAPD), hexafunctional reactive oligomer (SP1013), trimethylolpropane triacrylate (TMPTA) and a photoinitiator in methanol/2-methoxyethanol. The compositions of the electrolyte inks were MEPAB/MDAPD/SP1013/TMPTA=6/24/17.2/12.8, 15/15/17.2/12.8 and 24/6/17.2/12.8. Humid-membranes were deposited on a gold electrode/alumina electrode using an ink-jet printer equipped with a UV lamp followed by immediate UV curing. The humidity-sensing characteristics including hysteresis, frequency and temperature dependence, response time and water durability were estimated.

• Journal of Electrochemical Science and Technology
• /
• 제12권2호
• /
• pp.225-229
• /
• 2021

Commercially available continuous glucose sensors require the operation stability for more than two weeks. Typically, the sensor comprises a sensing layer and an over-coating layer for the stable operation inside the body. In the sensing layer, enzymes and mediators are cross-linked together for the effective sensing of the glucose. The over-coating layer limits the flux of glucose and works as a biocompatible layer to the body fluids. Here, we report the simple preparation of the flux-limiting layer by the condensation of polyethyleneimine (PEI), tri-epoxide linker, and trimethylolpropane triglycidyl ether (PTGE). The sensor is constructed by a layer-by-layer drop-coating of the sensing layer containing glucose dehydrogenase and the PEI-derived blocking layer. It is stable for more than 14 days, which is enough for the sensor in the continuous monitor glucose monitoring (CGM) system.

• 공업화학
• /
• 제10권5호
• /
• pp.639-643
• /
• 1999

동시중합방법으로 에폭시수지와 castor oil형 폴리우레탄수지로 상호침투고분자(IPNs)를 형성하였다. 사슬연장제인 1,4-butanediol (BD)가 가교제인 BD/trimethylolpropane(TMP)에 따라 두 종류의 폴리우레탄(PU)을 제조했다. PU가 증가함에 따라, BD를 사슬연장제로 사용한 PU/epoxy가 BD/TMP를 가교제로 사용한 PU/epoxy SINs보다 damping피크의 이동이 컸다. BDPU/epoxy SINs는 BD/TMP-PU/epoxy SINs에 비해 사용성이 좋았다. 이러한 두 구조에서, 사슬연장제와 가교제에 따라 PU/epoxy SINs의 특이한 netwok 형성이 상혼합의 정도를 변화시켰음을 가정하였다. PU의 사슬연장제의 종류가 IPNs의 상혼합을 결정하는 중요한 인자였다. BD/TMP-PU의 반응이 에폭시수지의 가교반응보다 빠를 때, 가교구조의 entanglement가 감소하여 상혼합정도가 감소하였다. 두 PU/epoxy SINs는 굴곡특성과 파괴인성이 증가하였다. BDPU/epoxy SINs와 BD/TMP-PU/epoxy SINs의 파괴단면에서 PU의 공동화에 의한 응력백화현상과 전단변형을 보였다.

• 한국산학기술학회논문지
• /
• 제15권6호
• /
• pp.4039-4045
• /
• 2014

전자선 조사 폴리프로필렌과 블랜드의 결정화 거동은 고분자 가공시 중요한 변수중 하나이다. 저밀도폴리에틸렌(linear low density polyethylene, LDPE) 함량에 따라 폴리프로필렌(polypropylene, PP)/LDPE 블렌드를 이축압출기를 이용하여 제조하였다. 조사에 의한 가교반응을 용이하게 하기위해 가교조제로 trimethylolpropane-trimetacrylate (TMPTMA)를 PP/LDPE 블렌드 제조시 첨가하였다. PP/LDPE 블랜드의 조사가교 효율에 대한 LDPE 함량의 영향을 평가하였다. 조사시료의 비등온 결정화과정과 결정구조를 DSC, X-선회절분석(X-ray diffraction, XRD), 그리고 편광현미경(polarized optical microscope, POM)을 이용하여 분석하였다. 조사 후 시료의 용융온도가 감소하는 것은 조사에 의한 PP 사슬의 절단에 의한 것으로 판단된다. Ozawa 지수, n이 4일 때 구형, 3일 때 디스크형, 2일 때 로드형의 결정구조를 나타낸다. Ozawa 분석 결과, 순수 PP의 n 값은 3.8, 30 wt%의 LDPE를 포함하는 시료의 n은 2.3을 나타내었다. LDPE 첨가와 조사에 의해 PP의 결정구조가 구형에서 disk나 rod형으로 변화하는 것을 Ozawa 분석과 POM을 통해 확인하였다. XRD 스펙트럼의 $16.1^{\circ}$에서 나타나는 ${\beta}$ 형 결정구조가 조사 후 시편에서 사라지는데, 이는 가교결합에 의한 것으로 해석할 수 있다.