• Korean Journal of Food Science and Technology
• /
• v.32 no.6
• /
• pp.1234-1243
• /
• 2000

A method for quantitative determination of styrene dimer and trimer, which are suspected as endocrine disruptors, in foods and containers was studied. For residual contents of styrene dimer and trimer in two-kinds of containers, which contained instant noodle and yogurt, sample pieces were completely dissolved in tetrahydrofuran. The polymer was precipitated with n-hexane, a portion of supernatant was concentrated for analysis. A sensitive method was also optimized for the quantification of styrene dimer and trimer in foods such as instant cup noodle and yogurt by using GC/MS. Limits of Detection were about 3.2-87.0 ppb for styrene dimers and trimers. The highest recovery was obtained by extraction with acetone/hexane(1:1), followed by florisil clean-up. The levels of styrene dimer and trimer migrated by food simulants were much higher in heptane.

• Mass Spectrometry Letters
• /
• v.10 no.1
• /
• pp.32-37
• /
• 2019

The ${\pi}-{\pi}$ interactions of the peptide-dimer and peptide-trimer complexes were investigated in the (VQIVYK + LYQLEN) and (VQIVYK + NNQQNY) mixing solutions. The results showed that tyrosine (Y) residues were critical in the formation of hetero peptide-dimers and -trimers during the early oligomerization process. We used collision-induced dissociation (CID) along with electrospray ionization mass spectroscopy (ESI-MS) to obtain the structural information of the hetero-dimers and -trimers. We chose three amyloidogenic peptides-VQIVYK, NNQQNY, and LYQLEN-from tau protein, yeast prion-like protein Sup35, and insulin chain A, respectively. Hetero-dimer, -trimer, -tetramer, and -pentamer complexes were observed in the mass spectra. The tandem mass spectrum of the hetero-dimer and hetero-trimer showed two different fragmentation patterns (covalent and non-covalent bond dissociation). Y-Y interaction structures were also proposed for the hetero-dimer and -trimer complexes.

• Journal of the Korean Vacuum Society
• /
• v.17 no.5
• /
• pp.375-380
• /
• 2008

We have investigated the low-dimensional nanostructures produced by adsorption of triangular Co coplexed dipyrromethane(DPM-trimer, Fig. 1) on graphite surface by using scanning tunneling microscope. DPM-trimer deposition on the graphite surface leads to the formation of long 1-D molecular wires and 2-D hexagonal patterns. We analyzed the heights and structures of 1-D molecular wires and 2-D hexagonal patterns. The 1-D molecular wires were formed 'edge-on' alignments on graphite surface result of continuos $\pi-\pi$ stacking interactions. The other case of 2-D hexagonal patterns were formed 'face-on' alignments on graphite surface.

• Polymer(Korea)
• /
• v.30 no.3
• /
• pp.238-246
• /
• 2006

The aim of this study is to enhance the flame retardancy by the synergism effect of chlorine and phosphorus groups. The flame-retardant polyurethane coatings containing chlorine and phosphorus compounds were synthesized. After synthesizing the intermediate products of tetramethylene bis (orthophosphate) (TMBO) and neohexanediol trichlorobenzoate (TBA-adduct), the condensation polymerization was performed with four different monomers of two intermediates, 1,4-butanediol, and adipic acid to obtain four-component copolymer(TTBA). The two-component flame-retardant polyurethane coatings (TTBA-10C/HDI-trimer=TTHD-10C, TTBA-20C/HDI-trimer=TTHD-20C, TTBA-30C/HDI trimer=TTHD-30C) were obtained by curing reaction at room temperature with the synthesized TTBAs and hexamethylene diisocyanate (HDI)-trimer as a curing agent. The obtained TTHDs were made into coating samples and used as test samples for various physical properties. The physical properties of the flame-retardant coatings containing chlorine and phosphorus groups were generally inferior to those containing only phosphorus group. Flame retardancy was tested by vortical and horizontal combustion method, and $45^{\circ}$ Meckel burner method. Since the retardancy of flame-retardant coatings containing chlorine and phosphorus groups was better than that containing only phosphorus group, it could be concluded that the retardancy by the synergism effect of chlorine and phosphorus groups exhibited.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.3
• /
• pp.237-242
• /
• 2003

The high-solid coatings were prepared by blending the synthesized acrylic resin in the previous paper and hexamethylene diisocyanate-trimer and curing it at room temperature. The characterization of the films of the prepared coatings was performed. The impact resistance, $60^{\circ}C$ specular gloss, cross-hatch adhension, and heat resistance of the films proved to be good, and the pencil hardness and drying time proved to be slightly poor. Especially, there was a remarkable improvement in the heat resistance. This improvement may stem from the regular arrangement of ethyl groups introduced into the acrylic resin. From a viscoelastic measurement using a rigid-body pendulum, curing was accelerated with the $T_g$ value. With the increase in $T_g$, log damp value was lowered and dynamic viscoelasic $T_g$ of a cured film was increased.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.1
• /
• pp.62-68
• /
• 2004

PU flame-retardant coatings (APHD) containing phosphorous were prepared by blending of hexamethylene diisocyanate-trimer, white pigment, dispersing agent, flowing agent, and previously prepared benzoic acid modified polyester (APTB) that contains phosphorous. Physical properties of the prepared APHD were examined. With the introduction of BZA (contained in APTB), the film viscosity and film hardness of APHD decreased. With the introduction of caprolactone group, the flexibility, impact resistance, accelerated weathering resistance of APTBs increased. Flame retardancy of the coatings was tested. In a vertical burning method, APHD shows 210${\sim}$313 seconds, and in a $45^{\circ}$ Meckel burner method, shows 1.3${\sim}$4.0$cm^2$ of char length, which indicates that the coatings are good flame-retardant coatings. Moreover, the amount of afterglow and flame retardancy of the coatings are decreased with increasing BZA content.

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.2
• /
• pp.110-114
• /
• 2006

The high-solid coatings were prepared by blending the synthesized acrylic resin in the previous paper, and hexamethylene diisocyanate-trimer and curing it at room temperature. The characterization of the films of the prepared coatings was performed. The $60^{\circ}$ specular gloss, impact resistance, cross-hatch adhesion, and heat resistance of the films proved to be good, and the pencil hardness, drying time, and pot-life proved to be slightly poor. From a viscoelastic measurement using a rigid-body pendulum, curing was accelerated with the Tg value.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.4
• /
• pp.300-305
• /
• 2004

High-solid coatings were prepared by blending of previosly synthesized acrylic resins and hexamethylene diisocyanate-trimer and curing it at room temperature. The characterization of the films of the prepared coatings was performed. The impact resistance, cross-hatch adhesion, $60^{\circ}$specular gloss, and heat resistance of the films proved to be good, and the pencil hardness and drying time proved to be slightly poor. Especially, there was a remarkable improvement in the heat resistance. This improvement may stem from the regular arrangement of ethyl groups introduced into the acrylic resin. As a result of Rigid-body pendulum visco-elasticity measurement, dynamic $T_g$ values of cured films increased with dynamic $T_g$ values.

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.1
• /
• pp.77-84
• /
• 2006

Modified polyesters (TTBA-10C, -20C, -30C) that contain phosphorus and chlorine were synthesized by the condensation polymerization of tetramethylene bis(orthophosphate), neohexanediol trichlorobenzoate, 1,4-butanediol and adipic acid, in which tetramethylene bis(orthophosphate) and neohexanediol trichlorobenzoate were prepared previously in our laboratory. In this study, two-component flame-retardant polyurethane coatings (TTBA-10C/HDI-trimer=TTHD-10C, TTBA-20C/ HDI-trimer= TTHD-20C, TTBA-30C/HDI-trimer= TTHD-30C) were obtained by curing at room temperature with the synthesized TTBAs and hexamethylene diisocyanate (HDI)-trimer as a curing agent. The obtained TTHDs were made into coating samples and used as test samples for various physical properties. The physical properties of the flame-retardant coatings containing chlorine and phosphorus groups were generally inferior to those containing only phosphorus group. Flame retardancy was tested by vertical and horizontal combustion method, and $45_{\circ}$ Meckel burner method. Since the retardancy of flame-retardant coatings containing chlorine and phosphorus groups was better than that containing only phosphorus group, it could be concluded that the retardancy by the synergism effect of chlorine and phosphorus groups exhibited.

• Korean Journal of Pharmacognosy
• /
• v.11 no.3_4 s.43
• /
• pp.153-162
• /
• 1980

1) The hydroxy-substitution in the simple phenolic compounds follows an additivity rule in the chemical shifts of their aromatic carbon atoms. In para-and ortho-effects is a good agreement between calculated and measured values, but the meta-effect is not certain. 2) The additivity rule was applied to assign the chemical shifts of catechins. 3) The nuclear overhauser effect was applied to assign the chemical shifts of C-8 and C-6 atoms of catechins and their polymer. The signal of C-8 is lower in intensity and appear in lower field than C-6. 4) The results of the NOE were applied to determine the bonding positions of catechin units in the catechin dimer and trimer. The bonding positions are C-8a and C-8b atoms of the second and third catechin units. 5) It was tried to determine the conformation of the catechin dimer and trimer by analysing the signal shapes of C-3' and C-4' atoms in the catechol moieties. The catechol moieties lie in opposite side in the dimer and trimer structure. A combined analysis of $^{13}C-and\;^1H-NMR$ results lead to the suggestion that such a catechin polymer is a zigzag planar form.