• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.3
• /
• pp.17-30
• /
• 2000

In this paper, we propose an efficient algorithm to produce 3-D surface model from a set of range data, based on NURBS (Non-Uniform Rational B-Splines) surface fitting technique. It is assumed that the range data is initially unorganized and scattered 3-D points, while their connectivity is also unknown. The proposed algorithm consists of three steps: initial model approximation, hierarchical representation, and construction of the NURBS patch network. The mitral model is approximated by polyhedral and triangular model using K-means clustering technique Then, the initial model is represented by hierarchically decomposed tree structure. Based on this, $G^1$ continuous NURBS patch network is constructed efficiently. The computational complexity as well as the modeling error is much reduced by means of hierarchical decomposition and precise approximation of the NURBS control mesh Experimental results show that the initial model as well as the NURBS patch network are constructed automatically, while the modeling error is observed to be negligible.

• Animal Systematics, Evolution and Diversity
• /
• v.36 no.1
• /
• pp.78-80
• /
• 2020

A sphingid species, Macroglossum corythus Walker, 1856 is newly recorded from Korea. Macroglossum corythus can be characterized by grayish or dark greenish fore- and hindwings, blackish basal, ante- and postmedial lines with a blackish discal dot on the forewing and transverse antemedial line, as well as a strongly dentate postmedial line and a thick, dark brownish tinged subterminal line on the hindwing. The male genitalia of Macroglossum corythus can be characterized by the long saccular process of valva and the phallus with one hooked distal process and the large penshaped cornutus and a notched ridge. The female genitalia of Macroglossum corythus can be characterized by the long tubular ductus bursae and the long ovate corpus bursae with multiple stripes and a long triangular patch of minute signa. To date, six species of the genus Macroglossum have been identified in Korea.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.12
• /
• pp.573-577
• /
• 2002

We designed wideband HTS antennas which consists of two triangle -radiation patches using a $YBa_2Cu_3O_{7-X}$ (YBCO) superconducting thin film. The major limitation of high-Tc superconducting (HTS) microstrip antennas is the narrow bandwidth due to the high Q and thin substrate. Defining bandwidth as the frequency range over which standing wave ratio (SWR) 2:1 or less, HTS antenna bandwidths are typically 0.85 % to 1.1 %. Thus considerable effort has been focused on developing antennas for broadband operation. To calculate input impedance and design of the broadband HTS antennas a moment method technique was used. The HTS antenna fabricated in this work was designed for K-band, which is useful band for satellite to satellite communications. The bandwidth obtained was a significant 6.7 % and the other measured performance of our HTS antenna, including the bandwidth, radiation Pattern, efficiency, standing wave ratio (SWR) and return losses was reported.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.9
• /
• pp.412-417
• /
• 2003

In this Paper, we propose a time-domain magnetic field integral equation (TD-MFIE) formulation for analyzing the transient electromagnetic response from three-dimensional (3-D) dielectric bodies. The solution method in this paper is based on the Galerkin's method that involves separate spatial and temporal testing procedures. Triangular patch basis functions are used for spatial expansion and testing functions for arbitrarily shaped 3-D dielectric structures. The time-domain unknown coefficients of the equivalent electric and magnetic currents are approximated tv a set of orthonormal basis function that is derived from the Laguerre polynomials. These basis functions are also used for the temporal testing. Numerical results computed by the proposed method are presented and compared.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.523-526
• /
• 2002

We designed wideband HTS antennas which consists of two triangle-radiation patches using a YBa$_2$Cu$_3$O$\sub$7-x/ (YBCO) superconducting thin film. The major limitation of high-Tc superconducting (HTS) microstrip antennas is the narrow bandwidth due to the high Q and thin substrate. Defining bandwidth as the frequency range over which standing wave ratio (SWR) 2:1 or less, HTS antenna bandwidths are typically 0.85% to 1.1%. Thus considerable effort has been focused on developing antennas for broadband operation. To calculate input impedance and design of the broadband HTS antennas a moment method technique was used. The HTS antenna fabricated in this work was designed for K-band, which is useful band for satellite-to-satellite communications. The bandwidth obtained was a significant 6.7% and the other measured performance of our HTS antenna, including the bandwidth, radiation Pattern, efficiency, standing wave ratio (SWR) and return losses was reported.

• Proceedings of the Safety Management and Science Conference
• /
• 1999.11a
• /
• pp.565-574
• /
• 1999

In reverse engineering area, it is rapidly developing reconstruction of surfaces from scanning or digitizing data, but geometric models of existing objects unavailable many industries. This paper describes new methodology of reverse engineering area, good strategies and important algorithms in reverse engineering area. Furthermore, proposing reconstruction of surface technique is presented. A method find base geometry and blending surface between them. Each based geometry is divided by triangular patch which are compared their normal vector for face grouping. Each group is categorized analytical surface such as a part of the cylinder, the sphere, the cone, and the plane that mean each based geometry surface. And then, each based geometry surface is implemented infinitive surface. Infinitive average surface's intersections are trimmed boundary representation model reconstruction. This method has several benefits such as the time efficiency and automatic functional modeling system in reverse engineering. Especially, it can be applied 3D scanner and 3D copier.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.407-407
• /
• 2004

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.8
• /
• pp.834-842
• /
• 2002

The method of moment is applied to the analysis of electromagnetic scattering from an arbitrarily-shaped conductor. The conducting surface is discretized into triangular patches using a GID tool. Surface currents on a conductor are expanded with a vector triangle basis function. By using the Duffy's method, the singular integration appeared in a triangle patch can be transformed into the non-singular integral form suitable for one dimensional Gaussian quadrature integration method. Mutual and self integration extracted singular terms are evaluated by two dimensional Gaussian quadrature techniques.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.459-462
• /
• 2008

This paper describes the design of single body type repeater antenna for isolation enhancement between donor and receptor antennas. The antenna system consists of cavity, triangular patch antenna and cavity reflector. The antenna satisfies return-loss and isolation specifications in the desired band while the broadside gain is a little bit short from the spec.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.5
• /
• pp.510-515
• /
• 2011

In this paper, an artificial transmission line coupler with slotted-triangular patches, which is compact and spacesaving structure, is proposed. The proposed structure has specific features of not only convenience for adjusting the characteristic impedance and the phase of its coupled line by varying the lengths of the slots of the artificial transmission lines in designing a coupler but also the maximized coupling value at less than ${\lambda}$/4 electrical length so that it can be designed in compact and small dimensions, while conventional coupled line couplers are generally limited in compact and miniaturized designs by their ${\lambda}$/4 transmission lines. A fabricated 15 dB test-coupler at 2.4 GHz band by proposed design method shows good agreement with theory and simulation.