• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.1
• /
• pp.33-39
• /
• 1984

In order to elucidate the taste compounds of wild eel, Anguilla japonica, free amino acids, nucleotides and their related compounds, organic bases, sugars, organic acids and minerals were analyzed, and then followed by organoleptic test of synthetic extract prepared on the basis of the analytical data. Taste panel assessments of synthetic extracts prepared with each extractive component omitted were carried out by a triangle difference test, and changes in profile were assessed. In free amino acid composition, lysine was dominant occupying $25\%$ of total free amino acid. The other abundant amino acids were glycine, arginine, alanine and histidine. From the results of analysis of nucleotides, IMP was dominant showing about $70\%$ of total nucleotides while ATP, ADP, AMP, inosine and hypoxanthine were low in content. Among organic bases total creatinine was abundant. The amount of betaine was 24 mg/100 g. The main organic acid were butyric acid, valeric acid and succinic acid. As for the sugars, glucose and inositol were 1-2 mg/ 100g in content. $K^+,\;Na^+,\;PO_{4}^{3-}\;and\;Cl^-$ were found to be the major ions. From the results of omission test the major components which contribute to produce the taste were glycine, serine, glutamic acid, IMP, $Na^+,\;K^+,\;Cl^-,\;PO_{4}^{3-}$, lysine, alanine, isoleucine, aspartic acid and creatinine.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.16 no.3
• /
• pp.202-210
• /
• 1983

In order to elucidate the taste compounds of Korean catfish, Parasilurus asotus, free amino acids, nucleotides and their related compounds, organic bases, sugars, organic acids and minerals in the extracts of Korean catfish were analyzed, and then evaluated by sensory test of synthetic extract prepared on the basis of the analytical data. Taste panel assessments of synthetic extracts prepared with each extractive component omitted were carried out by a triangle difference test, and changes in taste profile were assessed. In free amino acid composition, glycine was dominant occupying $25\%$ of total free amino acids. The other abundant free amino acids were lysine, taurine and alanine. Judging from the result of analysis of nucleotides, IMP was dominant showing about $70\%$ of total nucleotides while ATP, ADP, AMP, inosine and hypoxanthine were low in content. Among organic bases, total creatinine was abundant and its nitrogen content occupied more than $50\%$ of the total extractive nitrogen. The amount of betaine was 18mg/100g and trace amount of trimethylamine and trimethylamine oxide were detected. The main organic acids were succinic, butyric, propionic and valeric acid. On the other hand, oxalic, fumaric, maleic, tartaric and citric acids were analyzed in trace. As for the sugars, glucose was found to be the most abundant monosaccharide. Extremely small amounts of fructoae, inositol were also detected and ribose and arabinose were trace in content. $K^+,\;Na^+,\;PO_{4}^{3-}$ and $Cl^-$ were found to be the major ions and small amount of $Ca^{2+}$ were defected. The synthetic extract, prepared with about 40 pure chemicals based on the analytical data satisfactorily revealed the natural taste of the original extract except slight difference in meaty taste and mildness. From the results of omission test the major components which contribute to produce the taste were serine, IMP, succinic acid and $PO_{4}^{3-}$.

• Korean Journal of Applied Biomechanics
• /
• v.26 no.1
• /
• pp.115-126
• /
• 2016

Objective: The purpose of this study was to investigate plantar foot pressure and static balance according to the type of insole in the elderly. Methods: Thirteen elderly (mean age: $67.08{\pm}2.25years$, mean height: $159.63{\pm}9.64cm$, mean body weight: $61.48{\pm}9.06kg$) who had no previous injury experience in the lower limbs and a normal gait pattern participated in this study. Three models of insoles of the normal, 3D, and triangle types were selected for the test. The Pedar-X system and Pedar-X insoles, 3.3 km/h of walking speed, and a compilation of 20 steps walking stages were used to analyze foot-pressure distribution. Static balance test was conducted using Gaitview AFA-50, and balance (opening eyes, closing eyes) was inspected for 20 s. One-way ANOVA was conducted to test the significance of the results with the three insoles. p-value of less than .05 was considered statistically significant. Results: The mean foot pressure under the forefoot regions was the lowest with the 3D insole during treadmill walking (p<.05). The mean value under the midfoot was the highest with the 3D insole (left: p<.05, right: p<.01). The mean value under the rearfoot was the lowest with the 3D insole (p<.001). The maximum foot pressure value under the foot regions was the lowest on both sides of the forefoot with the 3D insole. A statistically significant difference was seen only in the left foot (p<.01). The maximum value under the midfoot was the highest with the 3D insole (p<.001). No statistically significant difference was detected on the values under the rearfoot. In the case of vertical ground reaction force (GRF), statistically significant difference was seen only in the left side rearfoot (p<.01). However, static balance values (ENV, REC, RMS, Total Length, Sway velocity, and Length/ENV) did not show significant differences by the type of insole. Conclusion: These results show that functional insoles can decrease plantar pressure and GRF under the forefoot and rearfoot. Moreover, functional insoles can dislodge the overload of the rearfoot and forefoot to the midfoot. However, functional insoles do not affect the static balance in the elderly.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.7 s.144
• /
• pp.918-925
• /
• 2005

The following are the results from the infrared body temperature image test to verify the changes in facial temperature according to call duration with a cellular phone. As for the body temperatures, it appears to be the mean value at the upper central point of phone's battery among 7 different points that are measured, and to be the highest at srernocleido-mastoid and scapular trapezius muscle triangle zone$(34.25^{\circ}C\; and\;34.05^{\circ}C\;each)$. The changes of body temperature according to the time duration shows that the body temperature rises according to the length of phone use because of the heat emitted from the battery. As for the temperature changes according to blocking materials, the one without processing appears to be higher in the mean temperature compared to the others that are processed, NSS(Nano Silver Silk) and NSG(Nano Silver Silk Gold) appear to be the lowest in the temperature to show the best blocking property. As for the temperature changes according to measuring points, it appears to be the highest at P4, P5 with all materials, and one with NSG to be the lowest at Pl, P2, P3, and one with NSS to be the lowest at P3, P4, P5, P6, which is due to the thermal conduction of Au and Ag. And the mean temperature at each point appears to be different according to the materials. Therefore, the study conducted with human participants requires a proper particle size of it which would not penetrate cellular tissues and a proper binder and binding treatment for it, to prevent the physical fatigues and the potential diseases. However, it is highly required for back-up researches to verify various aspects in applying nano silver to textile products.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.3
• /
• pp.548-554
• /
• 1994

The high temperature fatigue crack growth behavior of SUS 304 stainless steel at $550^{\circ}C$ and $650^{\circ}C$ was investigated under various kinds of stress ratio and frequency in sinusoidal waveform on the basis of the non-linear fracture mechanics. The result arranging crack growth rate by modified J-integral J' showed influence of stress ratio and frequency. All the data obtained under the test at $550^{\circ}C$ were plotted within data band of da/dN-${\triangle}J_f$ relationship for cycle-dependent crack growth. On the basis of static creep and cycle-dependent data band; both time- and cycle-dependent crack growth behavior was observed under loading conditions at $650^{\circ}C$, but cycle-dependent crack growth behavior predominantly appeared and time-dependent crack growth behaviour was little observed under loading conditions at $550^{\circ}C$. Fractographic examinations for fracture surface indicated that the fracture mode was generally transgranular. The stripes were found on fracture surface and each stripe was accompanied by a crack tip blunting and an abrupt increase in the load-point displacement. The $J'_{an}$ had a validity in case of $650^{\circ}C, but scarcely had it in case of $550^{\circ}C$.

• Journal of Korean Society for Quality Management
• /
• v.45 no.2
• /
• pp.247-260
• /
• 2017

Purpose: The study is aimed to identify the national cultural dimensions that are affecting the quality management (QM) maturity level and the project quality performance, and analyze their relationships. Methods: This study collected the data of QM Maturity level based on Crosby's QM maturity model and the project quality performance using the Iron Triangle (Quality, Time/Schedule and Cost) from the employees who are participating in the ITER Project across the major 8 countries (China, France, Italy, Japan, Korea, Russia, U.K. and U.S.A.). Three research hypotheses are proposed concerning the national cultural dimensions in this study and Hofstede's five cultural dimensions framework are used for the statistical test. Results: The results are two folds in the study: First, there is a significant positive correlation between the QM maturity level and the project quality performance. Second, three cultural dimensions (Collectivism, Large Power Distance and Strong Uncertainty Avoidance) and five cultural dimensions (Collectivism, Large Power Distance, Strong Uncertainty Avoidance, Feminity and Long Term Orientation) have a positive impact on the QM maturity level and the project quality performance respectively. Conclusion: From the results, the understanding and consideration of the culture difference among the countries participating International Collaboration R&D project are recommended.

• Journal of Biosystems Engineering
• /
• v.35 no.4
• /
• pp.250-256
• /
• 2010

This study is conducted to analyze the drying characteristics of domestically produced Lycii Fructus for improving drying conditions which was dependant on the shape and materials of drying plate. The materials of the drying plates were steel, aluminum and ABS resin, and each plate was shaped semicircle, quadrangular pyramid, and triangle pyramid. Also, mesh plate, the most general type was included. In other words, 10 kinds of plates were made and tested. The test was conducted at $45^{\circ}C$, for 24 hours and moisture content was measured every 4 hours. The quality of tested Lycii Fructus was measured by colorimeter after drying. The experimental results show that regardless of species of Lycii Fructus, the drying rate of the aluminium plate shaped quadrangular pyramid was fastest, 3.11%w.b./h. Except the mesh plate, the drying rate of most plates was about over 2.52%w.b./h. The quality of Lycii Fructus dried on the aluminium plate shaped quadrangular pyramid was the highest, and it was easiest to separate the dried Lycii Fructus from the aluminum plate shaped quadrangular pyramid.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.7
• /
• pp.2414-2434
• /
• 2015

Among numerous localization schemes proposed specifically for Wireless Sensor Network (WSN), the range-free localization algorithms based on the received signal strength indication (RSSI) have attracted considerable research interest for their simplicity and low cost. As a typical range-free algorithm, Approximate Point In Triangulation test (APIT) suffers from significant estimation errors due to its theoretical defects and RSSI inaccuracy. To address these problems, a novel localization method called FIAPIT, which is a combination of an improved APIT (IAPIT) and a fuzzy logic system, is proposed. The proposed IAPIT addresses the theoretical defects of APIT in near (it's defined as a point adjacent to a sensor is closer to three vertexes of a triangle area where the sensor resides simultaneously) and far (the opposite case of the near case) cases partly. To compensate for negative effects of RSSI inaccuracy, a fuzzy system, whose logic inference is based on IAPIT, is applied. Finally, the sensor's coordinates are estimated as the weighted average of centers of gravity (COGs) of triangles' intersection areas. Each COG has a different weight inferred by FIAPIT. Numerical simulations were performed to compare four algorithms with varying system parameters. The results show that IAPIT corrects the defects of APIT when adjacent nodes are enough, and FIAPIT is better than others when RSSI is inaccuracy.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.1
• /
• pp.103-109
• /
• 2009

Strong winds according to global warming cause the increase of the frequency and the repair cost of damaged roofs. In the United States, Factory Mutual Insurance Company(FMIC) promotes the roofing design that resists heavy wind-load, as the means of strict criteria. This fact reveals that more durable roofing system will be also required in Korea. Therefore, this study aims at developing such a system with high wind-resistance performance using Thermoplastic polyolefin(TPO) and Electromagnetic induction technology(EIT) than the previous systems. The system presented in this study consists of 4 main devices as follow; 1) a disc to fix sheets for TPO & EIT method, which can conduct structural design according to site condition, such as region, building height, and wind load. 2) a nail to have about 30% stronger lifting-up capacity than that of the previous nail. 3) a disc to fix sheets, which has triangle protuberance not to damage sheets in the repeatable wind load, and 4) a electromagnetic induction device to combine a disc and a sheet by heating uniformly and quickly adhesive agent on the disc. The results of mock-up test illustrate that the system provides wind-resistant performance to achieve satisfactorily the structural design criteria of FMIC. In addition, the system is faster, chipper, and easier than the existing system, and is expected that this roofing system can be applied to the rehabilitations of an existing as well as a new building.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.3
• /
• pp.89-98
• /
• 1987

Analyzed by using finite element method was 2-dimensional pollutant transtport phenomenon considering longitudinal and lateral direction in river. The Galerkin's finite element method based on linear interpolation is used and triangle is adopted as an element. In a number of model test attempts it has been demonstrated that the results calculated by the model are in good agreement with analytical solutions in a simplified channel where there is a known solution available. Actual application of the model is attempted along the 9km reach of the Han River considering the influx of the Tan Cheon and the Joongryang Cheon. The resultant 2-dimensional BOD concentrations profile in the reach is exhibiting more realistically the field situations than conventional 1-dimensional models are.